Difference between revisions of "Nikko STA-1101"
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Nikko]] |
− | * | + | * Model: STA-1101 |
− | * | + | * Year of manufacture: 1971 - 1973 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Black |
− | * | + | * Remote control: |
− | * | + | * Power consumption: 250 W max / 30 W rest. |
− | * | + | * Dimensions: 470 x 160 x 370 mm (WxHxD) |
− | * | + | * Weight: 15 kg |
− | * | + | * Original price approx.: 2'000 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono MM: 2 | + | ** Phono MM: 2.0 mV / 50 kOhm |
− | ** | + | ** Tape, Aux: 200 mV / 100 kOhm |
− | ** | + | ** Microphone: 2,0 mV / 50 kOhm |
− | ** | + | ** Antenna: FM 75/300 Ohm, MW 300 Ohm |
− | * | + | * Number of outputs: |
− | ** | + | ** Headphones (6.3 mm jack, front). |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (at distortion) |
− | + | 8 Ohm: 2x 40 W | |
− | + | 4 Ohm: 2x 60 W | |
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: 200 W, ± 1 dB | ** 4 Ohm: 200 W, ± 1 dB | ||
− | * | + | * Total harmonic distortion: 0.2% / 0.5% (at 1 W / nominal power) |
− | * | + | * Attenuation factor: 25 / 12 (8/4 Ohm). |
− | * | + | * Frequency response: |
− | ** 10 - 70 | + | ** 10 - 70,000 Hz, ± 1 dB. |
− | + | Aux: 20 - 40,000 Hz, ± 1 dB | |
− | * | + | * Signal-to-noise ratio: (extraneous voltage) |
− | ** | + | ** Microphone: 65 dB |
** Phono MM: 70 dB | ** Phono MM: 70 dB | ||
− | ** | + | ** Tape, Aux: 75 dB |
− | * | + | * Stereo channel separation: |
− | * | + | * Tone control: |
− | ** Bass: ± 12 dB | + | ** Bass: ± 12 dB at 70 Hz |
− | + | Treble: ± 12 dB at 10 kHz | |
* Loudness: +10 dB (70 Hz), +8 dB (10 kHz) | * Loudness: +10 dB (70 Hz), +8 dB (10 kHz) | ||
* High Filter: 10 kHz (-10 dB) | * High Filter: 10 kHz (-10 dB) | ||
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
− | * Mute: | + | * Mute: |
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
− | ** MW: 535 - 1 | + | ** MW: 535 - 1,605 kHz |
− | * | + | * Frequency response: |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 1.5 µV (IHF) |
− | + | MW: 100 µV (IHF) | |
− | + | Distortion factor: | |
− | ** | + | ** FM: 0.5% / 0.8% (Mono/MPX). |
− | + | MW: 0.8% | |
− | + | Signal-to-noise ratio: (noise voltage) | |
− | ** | + | ** FM: 60 dB |
** MW: 55 dB | ** MW: 55 dB | ||
− | * | + | * Channel separation: 40 dB (FM, 1 kHz) |
− | * | + | * Selectivity: |
− | * | + | * Co-wave selection: 1.5 dB (FM) |
− | * | + | * Spurious wave selection: |
− | * | + | * Image frequency attenuation: |
− | ** | + | ** FM: 80 dB (98 MHz) |
+ | MW: 70 dB (1 kHz) | ||
+ | IF attenuation: | ||
+ | ** FM: 100 dB (98 MHz) | ||
** MW: 70 dB (1 kHz) | ** MW: 70 dB (1 kHz) | ||
− | + | * AM suppression: 45 dB | |
− | |||
− | |||
− | * AM | ||
− | ''' | + | '''Special Features''' |
* Nikko Space Design | * Nikko Space Design | ||
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
* [[Nikko STA-301]] | * [[Nikko STA-301]] | ||
* [[Nikko STA-501 S]] | * [[Nikko STA-501 S]] | ||
Line 97: | Line 97: | ||
− | == | + | == Pictures == |
− | * | + | * Image: Nikko STA-1101 |
− | [[ | + | [[File:Nikko STA-1101-1.jpg]] |
+ | |||
+ | |||
+ | * Extract from brochure: Nikko STA-1101 | ||
+ | [[File:Nikko STA-1101-Prospekt-1.jpg]] | ||
− | == | + | == Reports == |
Line 108: | Line 112: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 02:17, 4 March 2019
Data[edit]
General
- Manufacturer: Nikko
- Model: STA-1101
- Year of manufacture: 1971 - 1973
- Made in: Japan
- Color: Black
- Remote control:
- Power consumption: 250 W max / 30 W rest.
- Dimensions: 470 x 160 x 370 mm (WxHxD)
- Weight: 15 kg
- Original price approx.: 2'000 DM
Connections
- Number of inputs:
- Phono MM: 2.0 mV / 50 kOhm
- Tape, Aux: 200 mV / 100 kOhm
- Microphone: 2,0 mV / 50 kOhm
- Antenna: FM 75/300 Ohm, MW 300 Ohm
- Number of outputs:
- Headphones (6.3 mm jack, front).
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (at distortion)
8 Ohm: 2x 40 W 4 Ohm: 2x 60 W
- Dynamic power
- 8 Ohm:
- 4 Ohm: 200 W, ± 1 dB
- Total harmonic distortion: 0.2% / 0.5% (at 1 W / nominal power)
- Attenuation factor: 25 / 12 (8/4 Ohm).
- Frequency response:
- 10 - 70,000 Hz, ± 1 dB.
Aux: 20 - 40,000 Hz, ± 1 dB
- Signal-to-noise ratio: (extraneous voltage)
- Microphone: 65 dB
- Phono MM: 70 dB
- Tape, Aux: 75 dB
- Stereo channel separation:
- Tone control:
- Bass: ± 12 dB at 70 Hz
Treble: ± 12 dB at 10 kHz
- Loudness: +10 dB (70 Hz), +8 dB (10 kHz)
- High Filter: 10 kHz (-10 dB)
- Low Filter (Subsonic):
- Mute:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 535 - 1,605 kHz
- Frequency response:
- Input sensitivity:
- FM: 1.5 µV (IHF)
MW: 100 µV (IHF) Distortion factor:
- FM: 0.5% / 0.8% (Mono/MPX).
MW: 0.8% Signal-to-noise ratio: (noise voltage)
- FM: 60 dB
- MW: 55 dB
- Channel separation: 40 dB (FM, 1 kHz)
- Selectivity:
- Co-wave selection: 1.5 dB (FM)
- Spurious wave selection:
- Image frequency attenuation:
- FM: 80 dB (98 MHz)
MW: 70 dB (1 kHz) IF attenuation:
- FM: 100 dB (98 MHz)
- MW: 70 dB (1 kHz)
- AM suppression: 45 dB
Special Features
- Nikko Space Design
Remarks[edit]
- Other models in the same series:
- Nikko STA-301
- Nikko STA-501 S
- Nikko STA-701
- Nikko STA-1101
- Nikko STA-6010
- Nikko STA-8010
- Nikko STA-9010
Pictures[edit]
- Image: Nikko STA-1101
- Extract from brochure: Nikko STA-1101