Difference between revisions of "Sansui Eight"
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Sansui]] |
| − | * | + | * Model: Eight |
| − | * | + | * Year of manufacture: 1970 - 1974 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Front aluminum, wood housing |
| − | * | + | * Remote control: no |
| − | * | + | * Power consumption: 420 W |
| − | * | + | * Dimensions: 140 x 440 x 327 mm (HxWxD) |
| − | * | + | * Weight: 17 kg |
| − | * | + | * Original price: 2'840 DM (October 1972) |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
** 2 x Phono (Cinch) 2mV (50kOhm) | ** 2 x Phono (Cinch) 2mV (50kOhm) | ||
** Aux (Cinch) 180 mV (50kOhm) | ** Aux (Cinch) 180 mV (50kOhm) | ||
** 2 x tape (Cinch) 180 mV (50 kOhm) | ** 2 x tape (Cinch) 180 mV (50 kOhm) | ||
** Tape (DIN) 180 mV (50 kOhm) | ** Tape (DIN) 180 mV (50 kOhm) | ||
| − | ** | + | ** Power amp input |
| − | ** | + | ** Antenna (FM: 75/300 Ohm, AM) |
| − | * | + | * Number of outputs: |
** Tape Rec 1, 2: | ** Tape Rec 1, 2: | ||
** Pre Out: | ** Pre Out: | ||
| − | ** | + | ** Headphones: |
| − | ** 2 | + | ** 2 pairs of speakers |
| − | ''' | + | '''Technical Specifications''' |
| − | '' | + | ''Amplifier'' |
| − | * | + | * Continuous power (at distortion) |
| − | + | 8 Ohm: 60/60 W | |
| − | + | 4 Ohm: 80/80 W | |
| − | * | + | * Dynamic power (IHF) |
** 8 Ohm: 160 W | ** 8 Ohm: 160 W | ||
** 4 Ohm: 200 W | ** 4 Ohm: 200 W | ||
| − | * | + | * Total harmonic distortion: < 0.3% |
| − | * | + | * Attenuation factor: 60 at 8 Ohm |
| − | * | + | * Frequency response: 5-50,000 Hz |
| − | * | + | * Signal-to-noise ratio: |
| − | * | + | * Stereo channel separation: more than 60 dB |
| − | * | + | * Tone control: |
| − | ** Bass: +/- 10 dB | + | ** Bass: +/- 10 dB at 50 Hz (2 dB steps). |
| − | ** | + | ** Mid: +/- 5 dB at 1,500 Hz (1 dB steps) |
| − | + | Treble: +/- 10 dB at 10,000 Hz (2 dB steps) | |
| − | * Loudness: + 8 dB | + | * Loudness: + 8 dB at 50 Hz, + 3 dB at 10,000 Hz |
| − | * High Filter: -10 dB | + | * High Filter: -10 dB at 10,000 Hz (12 dB/oct) |
| − | + | Low Filter (Subsonic): -10 dB at 50 Hz (12 dB/oct) | |
''Tuner'' | ''Tuner'' | ||
| − | * | + | * Reception: FM, MW |
| − | * | + | * Frequencies: |
| − | ** | + | ** FM: 88 - 108 MHz |
| − | ** MW: 535 - 1 | + | ** MW: 535 - 1,605 kHz |
| − | * | + | * Input sensitivity: |
| − | ** | + | ** FM: 1.1 µV at 26 dB and 1.25 µV at 30 dB. |
| − | + | MW: 100 µV at 1000 kHz (IHF) | |
| − | + | Distortion factor: in the range 120 Hz to 5 kHz < 0,3 % | |
| − | * Signalrauschabstand: Mono > 65 dB, | + | * Signalrauschabstand: Mono >65 dB, stereo > 63 dB |
| − | * | + | * Channel separation: > 35 dB at 400 Hz |
| − | * | + | * Selectivity: at 10 µV 52 dB, at 100 µV > 55 dB |
| − | * | + | * Common mode selection: 0.3 dB |
| − | * | + | * IF attenuation: 98 dB |
| − | ''' | + | '''Special Features''' |
| − | * Tape 2 | + | * Tape 2 connectors on the front panel |
| − | * 4- | + | * 4-channel VHF prepared |
| − | == | + | == Remarks == |
| − | * | + | * Other models in the same series: |
* [[Sansui Six]] | * [[Sansui Six]] | ||
* [[Sansui Seven]] | * [[Sansui Seven]] | ||
| Line 83: | Line 83: | ||
| − | == | + | == Pictures == |
| − | * | + | * Image: Sansui Eight |
| − | [[ | + | [[Image:Sansui_Eight.jpg]] |
<gallery> | <gallery> | ||
| − | + | Image:Sansui 06 100.jpg | |
| − | + | Image:Sansui 02 100.jpg | |
| − | + | Image:Sansui 03 100.jpg | |
| − | + | Image:Sansui 05 100.jpg | |
</gallery> | </gallery> | ||
| − | == | + | * Excerpt from brochure: Sansui Eight |
| + | [[File:Sansui Eight-Prospekt-1.jpg]] | ||
| + | |||
| + | |||
| + | == Reports == | ||
== Links == | == Links == | ||
| − | [[ | + | [[Category:Receiver]]</0,3> |
Latest revision as of 02:37, 23 January 2019
Data[edit]
General
- Manufacturer: Sansui
- Model: Eight
- Year of manufacture: 1970 - 1974
- Made in: Japan
- Color: Front aluminum, wood housing
- Remote control: no
- Power consumption: 420 W
- Dimensions: 140 x 440 x 327 mm (HxWxD)
- Weight: 17 kg
- Original price: 2'840 DM (October 1972)
Connections
- Number of inputs:
- 2 x Phono (Cinch) 2mV (50kOhm)
- Aux (Cinch) 180 mV (50kOhm)
- 2 x tape (Cinch) 180 mV (50 kOhm)
- Tape (DIN) 180 mV (50 kOhm)
- Power amp input
- Antenna (FM: 75/300 Ohm, AM)
- Number of outputs:
- Tape Rec 1, 2:
- Pre Out:
- Headphones:
- 2 pairs of speakers
Technical Specifications
Amplifier
- Continuous power (at distortion)
8 Ohm: 60/60 W 4 Ohm: 80/80 W
- Dynamic power (IHF)
- 8 Ohm: 160 W
- 4 Ohm: 200 W
- Total harmonic distortion: < 0.3%
- Attenuation factor: 60 at 8 Ohm
- Frequency response: 5-50,000 Hz
- Signal-to-noise ratio:
- Stereo channel separation: more than 60 dB
- Tone control:
- Bass: +/- 10 dB at 50 Hz (2 dB steps).
- Mid: +/- 5 dB at 1,500 Hz (1 dB steps)
Treble: +/- 10 dB at 10,000 Hz (2 dB steps)
- Loudness: + 8 dB at 50 Hz, + 3 dB at 10,000 Hz
- High Filter: -10 dB at 10,000 Hz (12 dB/oct)
Low Filter (Subsonic): -10 dB at 50 Hz (12 dB/oct)
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 88 - 108 MHz
- MW: 535 - 1,605 kHz
- Input sensitivity:
- FM: 1.1 µV at 26 dB and 1.25 µV at 30 dB.
MW: 100 µV at 1000 kHz (IHF) Distortion factor: in the range 120 Hz to 5 kHz < 0,3 %
- Signalrauschabstand: Mono >65 dB, stereo > 63 dB
- Channel separation: > 35 dB at 400 Hz
- Selectivity: at 10 µV 52 dB, at 100 µV > 55 dB
- Common mode selection: 0.3 dB
- IF attenuation: 98 dB
Special Features
- Tape 2 connectors on the front panel
- 4-channel VHF prepared
Remarks[edit]
- Other models in the same series:
- Sansui Six
- Sansui Seven
- Sansui 7000
- Sansui Eight
- Sansui Eight Deluxe
Pictures[edit]
- Image: Sansui Eight
- Excerpt from brochure: Sansui Eight
Reports[edit]
Links[edit]
</0,3>