Difference between revisions of "Sanyo DCA-1100"
(14 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Sanyo]] |
− | * | + | * Model: DCA-1100 |
− | * | + | * Type: Integrated amplifier |
− | * | + | * Years of manufacture: 1973 - 1976 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver |
− | * | + | * Remote control: - |
− | * | + | * Power consumption: 310 W max. |
− | * | + | * Dimensions: 420 x 130 x 330 mm (WxHxD) |
− | * | + | * Weight: 10 kg |
− | * | + | * Original price approx.: 1'495 DM |
− | |||
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** | + | ** Input sensitivity: |
− | ** Phono MM: 2. | + | ** Phono MM 1: 2.5 mV, 50 kOhm, 200 mV max. |
− | ** Tuner: | + | ** Phono MM 2: 2.5 mV, switchable 30 kOhm, 50 kOhm, 100 kOhm, max. 200 mV |
− | ** AUX: | + | ** Microphone: 3 mV, 50 kOhm |
− | ** Tape Play A, B: | + | ** Tuner: 100 mV, 100 kOhm |
− | * | + | ** AUX 1, 2: 100 mV, 100 kOhm |
− | ** | + | ** Tape Play A, B: 110 mV, 100 kOhm |
− | ** Tape Rec: | + | * Number of outputs: |
− | ** DIN: | + | ** Outputs: |
− | ** | + | ** Tape Rec 1, 2: 100 mV, 100 Ohm |
− | ** | + | ** Tape Rec 1, 2 DIN: 20 mV, 20 kOhm |
+ | ** Headphones: | ||
+ | ** Connectors for 2 pairs of speakers | ||
− | ''' | + | '''Technical Data''' |
− | * | + | * Continuous power (at distortion factor) |
− | ** 8 Ohm: 2x | + | ** 8 Ohm: 2x 56 W (RMS, 20 Hz - 20 kHz, 0.5 %) |
− | ** 4 Ohm: 2x | + | ** 4 Ohm: 2x 70 W |
− | * | + | * Dynamic power |
− | ** 8 Ohm: | + | ** 8 Ohm: 170 W |
− | ** 4 Ohm: | + | ** 4 Ohm: 250 W |
− | * | + | * Total harmonic distortion: 0.5 % at 8 Ohm |
− | * | + | * Attenuation factor: 40 at 8 Ohm |
− | * | + | * Frequency response: 10 - 80'000 Hz, ± 3 dB |
− | * | + | * Signal-to-noise ratio: |
** Phono: 76dB (MM) | ** Phono: 76dB (MM) | ||
− | + | Tuner: 90dB | |
− | + | AUX: 90dB | |
− | + | Tape Play: 90dB | |
− | * | + | * Tone control |
− | + | Bass: ± 10 dB at 100 Hz | |
− | + | Treble: ± 10 dB at 10 kHz | |
− | * Loudness: | + | * Loudness: + 8 dB at 100 Hz, + 3 dB at 10 kHz |
− | * High Filter: | + | * High Filter: - 12 dB/octave at 10 kHz |
− | * Low Filter: | + | * Low Filter: - 12 dB/octave at 40 Hz |
− | * | + | * Attenuator: 0 dB, - 20 dB |
− | ''' | + | '''Special Features''' |
− | * Mono / Stereo | + | * Mono / Stereo switch |
+ | * 2 microphone inputs front panel | ||
− | == | + | == Remarks == |
− | * | + | * Amplifiers of the same series: |
− | ** [[ | + | * [[Sanyo DCA-200]] |
− | + | * [[Sanyo DCA-250]] | |
− | + | * [[Sanyo DCA-650]] | |
− | + | * [[Sanyo DCA-1100]] | |
− | + | * [[Sanyo DCA-1200]] | |
− | + | * [[Sanyo DCA-1300]] | |
+ | * [[Sanyo DCA-1400]] | ||
− | * | + | * Tuners of the same series: |
− | ** [[ | + | * [[Sanyo FMT-200 K]] |
− | ** [[ | + | * [[Sanyo FMT-250 K]] |
− | + | * [[Sanyo FMT-450 K]] | |
− | + | * [[Sanyo FMT-1100 K]] | |
+ | * [[Sanyo FMT-1200 K]] | ||
+ | * [[Sanyo FMT-1300 K]] | ||
+ | * [[Sanyo FMT-1400 K]] | ||
− | == | + | == Pictures == |
− | + | * Extract from brochure: Sanyo Combi DCA-1100 / FMT-1100 K | |
+ | [[File:Sanyo DCA-FMT-1100-Prospekt-1.jpg]] | ||
− | == | + | == Reports == |
Line 87: | Line 94: | ||
− | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 03:46, 7 January 2019
Data[edit]
General
- Manufacturer: Sanyo
- Model: DCA-1100
- Type: Integrated amplifier
- Years of manufacture: 1973 - 1976
- Made in: Japan
- Color: Silver
- Remote control: -
- Power consumption: 310 W max.
- Dimensions: 420 x 130 x 330 mm (WxHxD)
- Weight: 10 kg
- Original price approx.: 1'495 DM
Connections
- Number of inputs:
- Input sensitivity:
- Phono MM 1: 2.5 mV, 50 kOhm, 200 mV max.
- Phono MM 2: 2.5 mV, switchable 30 kOhm, 50 kOhm, 100 kOhm, max. 200 mV
- Microphone: 3 mV, 50 kOhm
- Tuner: 100 mV, 100 kOhm
- AUX 1, 2: 100 mV, 100 kOhm
- Tape Play A, B: 110 mV, 100 kOhm
- Number of outputs:
- Outputs:
- Tape Rec 1, 2: 100 mV, 100 Ohm
- Tape Rec 1, 2 DIN: 20 mV, 20 kOhm
- Headphones:
- Connectors for 2 pairs of speakers
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2x 56 W (RMS, 20 Hz - 20 kHz, 0.5 %)
- 4 Ohm: 2x 70 W
- Dynamic power
- 8 Ohm: 170 W
- 4 Ohm: 250 W
- Total harmonic distortion: 0.5 % at 8 Ohm
- Attenuation factor: 40 at 8 Ohm
- Frequency response: 10 - 80'000 Hz, ± 3 dB
- Signal-to-noise ratio:
- Phono: 76dB (MM)
Tuner: 90dB AUX: 90dB Tape Play: 90dB
- Tone control
Bass: ± 10 dB at 100 Hz Treble: ± 10 dB at 10 kHz
- Loudness: + 8 dB at 100 Hz, + 3 dB at 10 kHz
- High Filter: - 12 dB/octave at 10 kHz
- Low Filter: - 12 dB/octave at 40 Hz
- Attenuator: 0 dB, - 20 dB
Special Features
- Mono / Stereo switch
- 2 microphone inputs front panel
Remarks[edit]
- Amplifiers of the same series:
- Sanyo DCA-200
- Sanyo DCA-250
- Sanyo DCA-650
- Sanyo DCA-1100
- Sanyo DCA-1200
- Sanyo DCA-1300
- Sanyo DCA-1400
- Tuners of the same series:
- Sanyo FMT-200 K
- Sanyo FMT-250 K
- Sanyo FMT-450 K
- Sanyo FMT-1100 K
- Sanyo FMT-1200 K
- Sanyo FMT-1300 K
- Sanyo FMT-1400 K
Pictures[edit]
- Extract from brochure: Sanyo Combi DCA-1100 / FMT-1100 K