Difference between revisions of "Sanyo DCA-650"
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Sanyo]] |
− | * | + | * Model: DCA-650 |
− | * | + | * Type: Integrated amplifier |
− | * | + | * Years of manufacture: 1973 - 1976 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver, wood side panels |
− | * | + | * Remote control: - |
− | * | + | * Power consumption: |
− | * | + | * Dimensions: 420 x 130 x 330 mm (WxHxD, width without wooden side panels). |
− | * | + | * Weight: 10.2 kg |
− | * | + | * Original price approx.: 948 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** | + | ** Input sensitivity: |
− | ** Phono MM 1, 2: 2 | + | ** Phono MM 1, 2: 2.5 mV, 50 kOhm. |
− | ** | + | ** Microphone: 2,5 mV, 50 kOhm |
** Tuner: 140 mV, 100 kOhm | ** Tuner: 140 mV, 100 kOhm | ||
** AUX 1, 2: 140 mV, 100 kOhm | ** AUX 1, 2: 140 mV, 100 kOhm | ||
** Tape Play 1, 2: 140 mV, 100 kOhm | ** Tape Play 1, 2: 140 mV, 100 kOhm | ||
− | + | Tape Play 1 DIN: 140 mV, 100 kOhm | |
** Main In: | ** Main In: | ||
− | * | + | * Number of Outputs: |
− | ** | + | ** Outputs: |
** Tape Rec 1, 2: 100 mV, 100 Ohm | ** Tape Rec 1, 2: 100 mV, 100 Ohm | ||
** Tape Rec 1 DIN: 20 mV, 20 kOhm | ** Tape Rec 1 DIN: 20 mV, 20 kOhm | ||
** Pre Out: | ** Pre Out: | ||
− | ** | + | ** Headphones: |
− | ** | + | ** Connectors for 2 pairs of speakers |
− | ''' | + | '''Technical Data''' |
− | * | + | * Continuous power (at distortion factor) |
− | ** 8 Ohm: 2x 43 W (RMS, 20 Hz - 20 kHz, 0 | + | ** 8 Ohm: 2x 43 W (RMS, 20 Hz - 20 kHz, 0.1 %) |
** 4 Ohm: 2x 60 W | ** 4 Ohm: 2x 60 W | ||
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.1 % at 8 Ohm |
− | * | + | * Attenuation factor: 60 at 8 Ohm |
− | * | + | * Frequency response: 5 - 100'000 Hz, ± 3 dB |
− | * | + | * Signal-to-noise ratio: |
** Phono: 70 dB | ** Phono: 70 dB | ||
− | ** | + | ** Microphone: 70 dB |
− | ** | + | ** High level: 90 dB |
− | * | + | * Tone control |
− | ** Bass: ± 10 dB | + | ** Bass: ± 10 dB at 100 Hz |
− | ** | + | *** Tilt frequencies: 250 Hz, 500 Hz |
− | * Loudness: + 8 dB | + | ** Treble: ± 10 dB at 10 kHz |
− | * High Filter: - 12 dB/ | + | *** Tilt frequencies: 2.5 kHz, 5 kHz |
− | * Low Filter: - 12 dB/ | + | * Loudness: + 8 dB at 100 Hz, + 3 dB at 10 kHz |
− | + | * High Filter: - 12 dB/octave at 10 kHz | |
− | * Slew | + | * Low Filter: - 12 dB/octave at 40 Hz |
+ | Attenuator: 0 dB, - 20 dB | ||
+ | * Slew rate switch: 5 µs, 10 µs, 20 µs | ||
− | ''' | + | '''Special Features''' |
− | * | + | * Pre- and power stage can be separated (Main In/Pre Out) |
− | * | + | * Microphone input front panel |
− | * | + | * Microphone mixer |
− | == | + | == Remarks == |
− | * | + | * Amplifiers of the same series: |
* [[Sanyo DCA-200]] | * [[Sanyo DCA-200]] | ||
* [[Sanyo DCA-250]] | * [[Sanyo DCA-250]] | ||
* [[Sanyo DCA-650]] | * [[Sanyo DCA-650]] | ||
* [[Sanyo DCA-1100]] | * [[Sanyo DCA-1100]] | ||
− | * [[Sanyo DCA-1200]] | + | * [[Sanyo DCA-1200]] |
+ | * [[Sanyo DCA-1300]] | ||
+ | * [[Sanyo DCA-1400]] | ||
− | * | + | * Tuners of the same series: |
* [[Sanyo FMT-200 K]] | * [[Sanyo FMT-200 K]] | ||
* [[Sanyo FMT-250 K]] | * [[Sanyo FMT-250 K]] | ||
− | * [[Sanyo FMT- | + | * [[Sanyo FMT-450 K]] |
* [[Sanyo FMT-1100 K]] | * [[Sanyo FMT-1100 K]] | ||
− | * [[Sanyo FMT-1200 K]] | + | * [[Sanyo FMT-1200 K]] |
+ | * [[Sanyo FMT-1300 K]] | ||
+ | * [[Sanyo FMT-1400 K]] | ||
− | == | + | == Pictures == |
− | * | + | * Image: Sanyo DCA-650 |
− | [[ | + | [[File:Sanyo DCA-650-1.jpg]] |
− | * | + | * Picture: Sanyo DCA-650 backside |
− | [[ | + | [[File:Sanyo DCA-650-2.jpg]] |
− | == | + | == Reports == |
Line 97: | Line 103: | ||
− | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 10:08, 6 January 2019
Data[edit]
General
- Manufacturer: Sanyo
- Model: DCA-650
- Type: Integrated amplifier
- Years of manufacture: 1973 - 1976
- Made in: Japan
- Color: Silver, wood side panels
- Remote control: -
- Power consumption:
- Dimensions: 420 x 130 x 330 mm (WxHxD, width without wooden side panels).
- Weight: 10.2 kg
- Original price approx.: 948 DM
Connections
- Number of inputs:
- Input sensitivity:
- Phono MM 1, 2: 2.5 mV, 50 kOhm.
- Microphone: 2,5 mV, 50 kOhm
- Tuner: 140 mV, 100 kOhm
- AUX 1, 2: 140 mV, 100 kOhm
- Tape Play 1, 2: 140 mV, 100 kOhm
Tape Play 1 DIN: 140 mV, 100 kOhm
- Main In:
- Number of Outputs:
- Outputs:
- Tape Rec 1, 2: 100 mV, 100 Ohm
- Tape Rec 1 DIN: 20 mV, 20 kOhm
- Pre Out:
- Headphones:
- Connectors for 2 pairs of speakers
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2x 43 W (RMS, 20 Hz - 20 kHz, 0.1 %)
- 4 Ohm: 2x 60 W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.1 % at 8 Ohm
- Attenuation factor: 60 at 8 Ohm
- Frequency response: 5 - 100'000 Hz, ± 3 dB
- Signal-to-noise ratio:
- Phono: 70 dB
- Microphone: 70 dB
- High level: 90 dB
- Tone control
- Bass: ± 10 dB at 100 Hz
- Tilt frequencies: 250 Hz, 500 Hz
- Treble: ± 10 dB at 10 kHz
- Tilt frequencies: 2.5 kHz, 5 kHz
- Bass: ± 10 dB at 100 Hz
- Loudness: + 8 dB at 100 Hz, + 3 dB at 10 kHz
- High Filter: - 12 dB/octave at 10 kHz
- Low Filter: - 12 dB/octave at 40 Hz
Attenuator: 0 dB, - 20 dB
- Slew rate switch: 5 µs, 10 µs, 20 µs
Special Features
- Pre- and power stage can be separated (Main In/Pre Out)
- Microphone input front panel
- Microphone mixer
Remarks[edit]
- Amplifiers of the same series:
- Sanyo DCA-200
- Sanyo DCA-250
- Sanyo DCA-650
- Sanyo DCA-1100
- Sanyo DCA-1200
- Sanyo DCA-1300
- Sanyo DCA-1400
- Tuners of the same series:
- Sanyo FMT-200 K
- Sanyo FMT-250 K
- Sanyo FMT-450 K
- Sanyo FMT-1100 K
- Sanyo FMT-1200 K
- Sanyo FMT-1300 K
- Sanyo FMT-1400 K
Pictures[edit]
- Image: Sanyo DCA-650
- Picture: Sanyo DCA-650 backside