Difference between revisions of "Sansui R-30"

(→‎Daten)
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
== Daten ==
+
__NOTOC__
−
{{Navigation}}
+
== Data ==
−
'''Allgemein'''
+
{{navigation}}
−
* Hersteller: [[Sansui]]
+
'''General'''
−
* Modell: R-30
+
* Manufacturer: [[Sansui]]
−
* Baujahre: ca. 1980-1981
+
* Model: R-30
−
* Hergestellt in: Japan
+
* Type: Receiver
−
* Farbe: Front alu gebürstet
+
* Years of manufacture: 1980 - 1982
−
* Fernbedienung: nein
+
* Made in: Japan
−
* Leistungsaufnahme max.: 120 W
+
* Color: Silver, Black
−
* Abmessungen: 430mm x 147mm x252mm (BxHxT)
+
* Power consumption: 120 W max.
−
* Gewicht: 5,6 kg
+
* Dimensions: 430 x 147 x252 mm (WxHxD)
−
* Neupreis ca.:  
+
* Weight: 5.6 kg
 +
* Original price approx.: 700 DM
  
  
−
'''Anschlüsse'''
+
'''Connections'''
−
* Anzahl der Eingänge:
+
* Number of inputs:
−
** 1x Phono (Cinch)
+
** Phono MM: 2.5 mV / 47 kOhm, 100 mV max.
−
** 1x Tape (Cinch)
+
** Aux: 150 mV / 47 kOhm
−
** Antenne (UKW: 75, 300 Ohm, AM)
+
** Tape Play 1, 2: 150 mV / 47 kOhm
−
* Anzahl der Ausgänge:
+
** Antenna (FM: 75, 300 Ohm, MW: 300 Ohm).
−
** 1x Tape Rec (Cinch)
+
* Number of outputs:
−
** 2 Lautsprecherpaare, zusammen und einzeln schaltbar
+
** Tape Rec 1, 2: 150 mV
−
** Kopfhörer (6,3mm Klinke)
+
** Headphones: 4 - 16 Ohm
 +
** 2 pairs of loudspeakers
  
  
−
'''Technische Daten'''
+
'''Technical Data'''
 +
 
 +
''Amplifier''
 +
* continuous power
 +
** 8 Ohm: 2x 25 W (RMS, 20 - 20'000 Hz), 2x 33 W (1 kHz)
 +
** 4 Ohm:
 +
* Dynamic power
 +
** 8 Ohm:
 +
** 4 Ohm:
 +
* Total harmonic distortion: < 0.009 %
 +
* Attenuation factor: 50 (8 Ohm)
 +
* Frequency response:
 +
** Phono, RIAA: 20 - 20'000 Hz, ± 0,3 dB
 +
** High level: 10 - 50'000 Hz, + 1 dB, - 3 dB
 +
* Signal-to-noise ratio:
 +
** Phono MM: 73 dB
 +
** High level: 90 dB
 +
* Tone control:
 +
** Bass: ± 10 dB at 100 Hz
 +
Treble: ± 10 dB at 10 kHz
 +
* Loudness: + 6 dB at 100 Hz, + 3 dB at 10 kHz
 +
* High Filter: - 6 dB / octave at 10 kHz
 +
* Low Filter (Subsonic):
 +
* Mute:
  
−
''Verstärker''
 
−
* Dauerleistung (bei Klirrfaktor) nach RMS (Nenn-, bzw. Sinusleistung nach RMS):
 
−
** 8 Ohm: 2x 25 W
 
−
** 4 Ohm:
 
−
* Gesamtklirrfaktor: < 0,09%
 
  
 
''Tuner''
 
''Tuner''
−
* Empfang: UKW, MW
+
* Reception: FM, MW
−
* Klirrfaktor:
+
* Frequencies:
−
** UKW: < 0,5% (Mono), < 0,8% (Stereo)
+
** FM: 88 - 108 MHz
 +
** MW: 525 - 1605 kHz
 +
* Input sensitivity:
 +
** FM: 2.2µV
 +
MW: 300µV
 +
* All other specifications for VHF
 +
* Frequency response: 30 - 15'000 Hz, + 2 dB, - 3 dB
 +
Distortion factor:
 +
** Mono: &lt; 0.5
 +
Stereo: &lt; 0.8
 +
* Signal-to-noise ratio:
 +
** Mono: 72 dB
 +
Stereo: 65 dB
 +
* Channel separation: 35 dB (1 kHz)
 +
* selectivity: 55 dB
 +
* Co-wave selection: 1.0 dB
 +
* Spurious wave selection: 65 dB
 +
* Image frequency attenuation: 80 dB
 +
* IF attenuation: 90 dB
 +
* AM suppression: 55 dB
 +
* Station memory:
 +
 
 +
 
 +
'''Special Features'''
 +
*
 +
 
 +
 
 +
== Remarks ==
 +
* Other models in the same series:
 +
* Amplifier:
 +
* [[Sansui A-40]]
 +
* [[Sansui A-60]]
 +
* [[Sansui A-80]]
 +
 
 +
 
 +
* [[Preamplifier]]
 +
* [[Sansui C-77]]
 +
 
 +
 
 +
* Power amplifier:
 +
* [[Sansui B-77]]
 +
 
 +
 
 +
* Tuner:
 +
* [[Sansui T-60]]
 +
* [[Sansui T-77]]
 +
* [[Sansui T-80]]
 +
 
 +
 
 +
* [[Receiver]]
 +
* [[Sansui R-30]]
 +
* [[Sansui R-50]]
 +
* [[Sansui R-70]]
 +
 
 +
 
 +
* [[Tape Deck]]
 +
* [[Sansui D-90]]
 +
* [[Sansui D-100]]
 +
 
 +
 
 +
* Turntable:
 +
* [[Sansui FR-D 3]]
 +
* [[Sansui P-50]]
 +
 
 +
 
 +
* Audio Timer:
 +
* [[Sansui AT-15s]]
 +
 
 +
 
 +
* Speakers:
 +
* [[Sansui ES-P 601]]
 +
* [[Sansui ES-P 801]]
 +
 
 +
 
 +
== Pictures ==
 +
* Image: Sansui R-30
 +
[[File:Sansui R-30-1.jpg]]
 +
 
 +
 
 +
== Reports ==
 +
 
 +
 
 +
== Links ==
 +
 
 +
 
 +
[[Category:Receiver]]

Latest revision as of 07:41, 17 December 2018

Data[edit]

General

  • Manufacturer: Sansui
  • Model: R-30
  • Type: Receiver
  • Years of manufacture: 1980 - 1982
  • Made in: Japan
  • Color: Silver, Black
  • Power consumption: 120 W max.
  • Dimensions: 430 x 147 x252 mm (WxHxD)
  • Weight: 5.6 kg
  • Original price approx.: 700 DM


Connections

  • Number of inputs:
    • Phono MM: 2.5 mV / 47 kOhm, 100 mV max.
    • Aux: 150 mV / 47 kOhm
    • Tape Play 1, 2: 150 mV / 47 kOhm
    • Antenna (FM: 75, 300 Ohm, MW: 300 Ohm).
  • Number of outputs:
    • Tape Rec 1, 2: 150 mV
    • Headphones: 4 - 16 Ohm
    • 2 pairs of loudspeakers


Technical Data

Amplifier

  • continuous power
    • 8 Ohm: 2x 25 W (RMS, 20 - 20'000 Hz), 2x 33 W (1 kHz)
    • 4 Ohm:
  • Dynamic power
    • 8 Ohm:
    • 4 Ohm:
  • Total harmonic distortion: < 0.009 %
  • Attenuation factor: 50 (8 Ohm)
  • Frequency response:
    • Phono, RIAA: 20 - 20'000 Hz, ± 0,3 dB
    • High level: 10 - 50'000 Hz, + 1 dB, - 3 dB
  • Signal-to-noise ratio:
    • Phono MM: 73 dB
    • High level: 90 dB
  • Tone control:
    • Bass: ± 10 dB at 100 Hz

Treble: ± 10 dB at 10 kHz

  • Loudness: + 6 dB at 100 Hz, + 3 dB at 10 kHz
  • High Filter: - 6 dB / octave at 10 kHz
  • Low Filter (Subsonic):
  • Mute:


Tuner

  • Reception: FM, MW
  • Frequencies:
    • FM: 88 - 108 MHz
    • MW: 525 - 1605 kHz
  • Input sensitivity:
    • FM: 2.2µV

MW: 300µV

  • All other specifications for VHF
  • Frequency response: 30 - 15'000 Hz, + 2 dB, - 3 dB

Distortion factor:

    • Mono: < 0.5

Stereo: < 0.8

  • Signal-to-noise ratio:
    • Mono: 72 dB

Stereo: 65 dB

  • Channel separation: 35 dB (1 kHz)
  • selectivity: 55 dB
  • Co-wave selection: 1.0 dB
  • Spurious wave selection: 65 dB
  • Image frequency attenuation: 80 dB
  • IF attenuation: 90 dB
  • AM suppression: 55 dB
  • Station memory:


Special Features


Remarks[edit]










Pictures[edit]

  • Image: Sansui R-30

Sansui R-30-1.jpg


Reports[edit]

Links[edit]

Retrieved from "https://hifi-wiki.com/index.php?title=Sansui_R-30&oldid=150832"