Difference between revisions of "Kenwood KR-770"
(4 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KR-770 |
− | * | + | * Year of manufacture: 1980 - 1982 |
− | * | + | * Made in: Korea |
− | * | + | * Color: Silver |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 350 W max. |
− | * | + | * Dimensions (WxHxD): 538 x 133 x 365 mm |
− | * | + | * Weight: 12 kg |
− | * | + | * Original price approx.: 1'200 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono MM: 2 | + | ** Phono MM: 2.5 mV, 50 kOhm |
+ | ** Microphone: 2,5 mV | ||
** AUX: 150 mV, 50 kOhm | ** AUX: 150 mV, 50 kOhm | ||
** Tape Play 1, 2: 150 mV, 50 kOhm | ** Tape Play 1, 2: 150 mV, 50 kOhm | ||
− | + | FM antenna: 75 Ohm, 300 Ohm | |
− | ** MW | + | ** MW antenna: 300 Ohm |
− | * | + | * Number of outputs: |
** Tape Rec 1, 2: 150 mV | ** Tape Rec 1, 2: 150 mV | ||
− | ** | + | ** Headphones (6,3mm jack): |
− | ** 2 | + | ** 2 pairs of speakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (at distortion) |
− | + | 8 Ohm: 2x 80 W | |
− | + | 4 Ohm: 2x 85 W | |
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.02 % |
− | * | + | * Attenuation factor: 60 at 8 Ohm |
− | * | + | * Frequency response: DC - 320'000 Hz, + 0 dB, - 3 dB |
− | * | + | * Signal-to-noise ratio: |
** Phono MM: 85 dB | ** Phono MM: 85 dB | ||
** Line: 105 dB | ** Line: 105 dB | ||
− | * | + | * Tone control: |
− | ** Bass: ± 10 dB | + | ** Bass: ± 10 dB at 100 Hz |
− | ** | + | crossover frequencies: continuously adjustable from 100 - 500 Hz |
− | + | ** Mids: ± 10 dB at 2 kHz | |
− | * Loudness: + 10 dB | + | Treble: ± 10 dB at 10 kHz |
− | * High Filter: | + | *** Crossover frequencies: continuously adjustable from 2 - 10 kHz |
− | * Low Filter (Subsonic): - 6 dB | + | * Loudness: + 10 dB at 100 Hz |
+ | * High Filter: yes | ||
+ | * Low Filter (Subsonic): - 6 dB at 18 Hz | ||
* Mute: | * Mute: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
** MW: 530 - 1610 kHz | ** MW: 530 - 1610 kHz | ||
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 1.6 µV |
** MW: 18 µV | ** MW: 18 µV | ||
− | * | + | * Frequency response: 30 - 15'000 Hz |
− | * | + | * Distortion factor: |
− | ** Mono: 0 | + | ** Mono: 0.09 % |
** Stereo: 0,15 % | ** Stereo: 0,15 % | ||
− | * | + | * Signal-to-noise ratio: |
− | ** | + | ** FM: |
*** Mono: 74 dB | *** Mono: 74 dB | ||
*** Stereo: 70 dB | *** Stereo: 70 dB | ||
** MW: 50 dB | ** MW: 50 dB | ||
− | * | + | * Channel separation: 45 dB |
− | * | + | * selectivity: 55 dB |
− | * | + | * Co-wave selection: 1.0 dB |
− | * | + | * Spurious wave selection: 90 dB |
− | * | + | * IF attenuation: 80 dB |
− | * | + | * IF attenuation: 90 dB |
− | * MW | + | * MW suppression: 55 dB |
− | * | + | * Station memory: 6 FM, 6 MW |
− | ''' | + | '''Special Features''' |
+ | * Tone Linear Switch | ||
* Tape Dubbing | * Tape Dubbing | ||
+ | * Microphone mixer | ||
+ | * Peak display | ||
+ | * Automatic station search | ||
+ | * IF band switchable: Narrow / Wide | ||
+ | * Mono / Stereo switchable | ||
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
* [[Kenwood KR-55]] | * [[Kenwood KR-55]] | ||
* [[Kenwood KR-80]] | * [[Kenwood KR-80]] | ||
Line 95: | Line 104: | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Kenwood KR-770 |
− | [[ | + | [[File:Kenwood KR-770-Prospekt-1.jpg]] |
− | == | + | == Reports == |
Line 106: | Line 115: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 07:35, 10 December 2018
Data[edit]
General
- Manufacturer: Kenwood
- Model: KR-770
- Year of manufacture: 1980 - 1982
- Made in: Korea
- Color: Silver
- Remote control: no
- Power consumption: 350 W max.
- Dimensions (WxHxD): 538 x 133 x 365 mm
- Weight: 12 kg
- Original price approx.: 1'200 DM
Connections
- Number of inputs:
- Phono MM: 2.5 mV, 50 kOhm
- Microphone: 2,5 mV
- AUX: 150 mV, 50 kOhm
- Tape Play 1, 2: 150 mV, 50 kOhm
FM antenna: 75 Ohm, 300 Ohm
- MW antenna: 300 Ohm
- Number of outputs:
- Tape Rec 1, 2: 150 mV
- Headphones (6,3mm jack):
- 2 pairs of speakers
Technical Data
Amplifier
- Continuous power (at distortion)
8 Ohm: 2x 80 W 4 Ohm: 2x 85 W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.02 %
- Attenuation factor: 60 at 8 Ohm
- Frequency response: DC - 320'000 Hz, + 0 dB, - 3 dB
- Signal-to-noise ratio:
- Phono MM: 85 dB
- Line: 105 dB
- Tone control:
- Bass: ± 10 dB at 100 Hz
crossover frequencies: continuously adjustable from 100 - 500 Hz
- Mids: ± 10 dB at 2 kHz
Treble: ± 10 dB at 10 kHz
- Crossover frequencies: continuously adjustable from 2 - 10 kHz
- Loudness: + 10 dB at 100 Hz
- High Filter: yes
- Low Filter (Subsonic): - 6 dB at 18 Hz
- Mute:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 530 - 1610 kHz
- Input sensitivity:
- FM: 1.6 µV
- MW: 18 µV
- Frequency response: 30 - 15'000 Hz
- Distortion factor:
- Mono: 0.09 %
- Stereo: 0,15 %
- Signal-to-noise ratio:
- FM:
- Mono: 74 dB
- Stereo: 70 dB
- MW: 50 dB
- FM:
- Channel separation: 45 dB
- selectivity: 55 dB
- Co-wave selection: 1.0 dB
- Spurious wave selection: 90 dB
- IF attenuation: 80 dB
- IF attenuation: 90 dB
- MW suppression: 55 dB
- Station memory: 6 FM, 6 MW
Special Features
- Tone Linear Switch
- Tape Dubbing
- Microphone mixer
- Peak display
- Automatic station search
- IF band switchable: Narrow / Wide
- Mono / Stereo switchable
Remarks[edit]
- Other models in the same series:
- Kenwood KR-55
- Kenwood KR-80
- Kenwood KR-710
- Kenwood KR-720
- Kenwood KR-730
- Kenwood KR-750
- Kenwood KR-770
Pictures[edit]
- Extract from brochure: Kenwood KR-770