Difference between revisions of "Accuphase E-206"
(→Daten) |
|||
(14 intermediate revisions by 7 users not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Accuphase]] |
− | * | + | * Model: E-206 |
− | * | + | * Type: Integrated amplifier |
− | * | + | * Years of manufacture: 1990 - 1993 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Champagne or Black |
− | * | + | * Remote control: |
− | + | * Power Consumption: 0 / 55 / 330 W (Power Off/ No Output Operation/ IEC 65 Operation). | |
− | * | + | * Dimensions: 445 x 145 x 370 mm (WxHxD) |
− | * | + | * Weight: approx. 17 kg |
− | * | + | * New price approx.: 2.400 DM, CHF 2'890.-- |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
+ | ** Phono 1 MM: 3.9 mV / 47 kOhm, 300 mV max. | ||
+ | ** Phono 2 MC: 110 µV / 100 Ohm, 9.5 mV max. | ||
+ | ** Tuner, Aux: 113 mV / 20 kOhm | ||
+ | ** Tape 1, 2: 113 mV / 20 kOhm | ||
+ | ** Main In: 1.47 V / 20 kOhm | ||
+ | * Number of outputs: | ||
+ | ** Tape Rec 1, 2: 89.8 mV / 220 Ohm | ||
+ | ** Pre Out: 1.47 V / 200 Ohm | ||
+ | ** Headphones (6.3 mm jack, front): 360 mV, 0 - 100 Ohm | ||
+ | ** 2 speaker pairs | ||
− | ''' | + | * Continuous power (at distortion factor) |
− | * | + | ** 8 Ohm: 100 W per channel (both channels in operation, 20-20,000 Hz, THD 0.02%) |
+ | ** 4 ohms: 140 W per channel (both channels operating, 20-20,000 Hz, THD 0.02%) | ||
+ | * Total harmonic distortion: | ||
+ | ** 8 ohms: 0.01% (both channels operating, 0.25 W to rated, 20-20,000 Hz). | ||
+ | ** 4 ohms: 0.02% (both channels operating, 0.25 W to rated power, 20-20,000 Hz) | ||
+ | * Attenuation factor: | ||
+ | ** 90 (8 ohm load, 50 Hz). | ||
+ | * Frequency Response: | ||
+ | ** High level inputs: | ||
+ | *** 20 - 20,000 Hz (+0/-0.2 dB, rated power). | ||
+ | *** 0.5 - 120,000 Hz (+0/-3 dB, 1 W output power) | ||
+ | ** Phono inputs: | ||
+ | *** 20 - 20,000 Hz (+0.2/-0.5 dB, rated power). | ||
+ | * Signal-to-noise ratio: | ||
+ | ** High level inputs: 106 dB (A), 80 dB (EIA). | ||
+ | ** Phono MM: 85 dB (A), 79 dB (EIA) | ||
+ | ** High level inputs: 66 dB (A), 74 dB (EIA) | ||
+ | * Tone control: "Presence Equalizer", can be switched off | ||
+ | 100 Hz: +/-10 dB | ||
+ | 500 Hz: +/-10 dB | ||
+ | 2 kHz: +/-10 dB | ||
+ | 8 kHz: +/-10 dB | ||
+ | * Loudness: not available | ||
+ | * High Filter: not available | ||
+ | * Low Filter (Subsonic): | ||
+ | ** 17 Hz: -12 dB/oct. | ||
+ | * Mute: | ||
+ | ** Attenuator: - 20 dB | ||
+ | |||
+ | |||
+ | '''Special Features''' | ||
+ | * Recording selector switch (all five sources, and "Record Off"). | ||
+ | * Tape Copy selector switch (Tape1 > Tape2, OFF, Tape2 > Tape1) | ||
+ | * Phono MM / MC switchable on the front panel | ||
+ | * 4-band equalizer can be switched off | ||
+ | |||
+ | |||
+ | == Remarks == | ||
+ | * Other models of the same series: | ||
+ | * [[Accuphase E-206]] | ||
+ | * [[Accuphase E-305]] | ||
+ | * [[Accuphase E-405]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | * Image: Accuphase E-206 | ||
+ | [[File:Accuphase E-206-Prospekt-1.jpg]] | ||
+ | |||
+ | |||
+ | * Picture: Accuphase E-206 | ||
+ | [[Image:Accuphase E-206 Back.JPG]] | ||
+ | |||
+ | |||
+ | * Excerpt from brochure: Accuphase E-206 | ||
+ | [[File:Accuphase E-206-Prospekt-1.jpg]] | ||
+ | |||
+ | |||
+ | == Reports == | ||
+ | * Audio issue 6/2005Individual test: "very good" (top class; 80 points) Price/Performance: "satisfactory". | ||
+ | |||
+ | |||
+ | == Links == | ||
+ | |||
+ | |||
+ | [[Category:Integrated amplifier]] |
Latest revision as of 00:30, 4 October 2018
Data[edit]
General
- Manufacturer: Accuphase
- Model: E-206
- Type: Integrated amplifier
- Years of manufacture: 1990 - 1993
- Made in: Japan
- Color: Champagne or Black
- Remote control:
- Power Consumption: 0 / 55 / 330 W (Power Off/ No Output Operation/ IEC 65 Operation).
- Dimensions: 445 x 145 x 370 mm (WxHxD)
- Weight: approx. 17 kg
- New price approx.: 2.400 DM, CHF 2'890.--
Connections
- Number of inputs:
- Phono 1 MM: 3.9 mV / 47 kOhm, 300 mV max.
- Phono 2 MC: 110 µV / 100 Ohm, 9.5 mV max.
- Tuner, Aux: 113 mV / 20 kOhm
- Tape 1, 2: 113 mV / 20 kOhm
- Main In: 1.47 V / 20 kOhm
- Number of outputs:
- Tape Rec 1, 2: 89.8 mV / 220 Ohm
- Pre Out: 1.47 V / 200 Ohm
- Headphones (6.3 mm jack, front): 360 mV, 0 - 100 Ohm
- 2 speaker pairs
- Continuous power (at distortion factor)
- 8 Ohm: 100 W per channel (both channels in operation, 20-20,000 Hz, THD 0.02%)
- 4 ohms: 140 W per channel (both channels operating, 20-20,000 Hz, THD 0.02%)
- Total harmonic distortion:
- 8 ohms: 0.01% (both channels operating, 0.25 W to rated, 20-20,000 Hz).
- 4 ohms: 0.02% (both channels operating, 0.25 W to rated power, 20-20,000 Hz)
- Attenuation factor:
- 90 (8 ohm load, 50 Hz).
- Frequency Response:
- High level inputs:
- 20 - 20,000 Hz (+0/-0.2 dB, rated power).
- 0.5 - 120,000 Hz (+0/-3 dB, 1 W output power)
- Phono inputs:
- 20 - 20,000 Hz (+0.2/-0.5 dB, rated power).
- High level inputs:
- Signal-to-noise ratio:
- High level inputs: 106 dB (A), 80 dB (EIA).
- Phono MM: 85 dB (A), 79 dB (EIA)
- High level inputs: 66 dB (A), 74 dB (EIA)
- Tone control: "Presence Equalizer", can be switched off
100 Hz: +/-10 dB 500 Hz: +/-10 dB 2 kHz: +/-10 dB 8 kHz: +/-10 dB
- Loudness: not available
- High Filter: not available
- Low Filter (Subsonic):
- 17 Hz: -12 dB/oct.
- Mute:
- Attenuator: - 20 dB
Special Features
- Recording selector switch (all five sources, and "Record Off").
- Tape Copy selector switch (Tape1 > Tape2, OFF, Tape2 > Tape1)
- Phono MM / MC switchable on the front panel
- 4-band equalizer can be switched off
Remarks[edit]
- Other models of the same series:
- Accuphase E-206
- Accuphase E-305
- Accuphase E-405
Pictures[edit]
- Image: Accuphase E-206
- Picture: Accuphase E-206
- Excerpt from brochure: Accuphase E-206
Reports[edit]
- Audio issue 6/2005Individual test: "very good" (top class; 80 points) Price/Performance: "satisfactory".