Difference between revisions of "Myro Heaven's Gate"

(Beschreibung)
 
(15 intermediate revisions by 7 users not shown)
Line 1: Line 1:
== Beschreibung ==
+
== Description ==
Sehr großer Lautsprecher mit modularem Gehäuse zur Beschallung in der Veranstaltungs- und Bühnentechnik. Er enthält für den Hochton ein Array aus drei Air Motion Transformern von ESS, durch deren unterschiedliche Ansteuerung (1,5 Wege) sich eine leicht nach unten gerichtete Abstrahlung ergibt. Da ein Bühnenlautsprecher gewöhnlich angehoben über den Zuhörern steht, wird so eine korrekte Beschallung des Publikums erreicht.
+
Very large loudspeaker with modular housing for sound reinforcement in event and stage technology. It contains an array of three air motion transformers [[ESS Heil AMT 1]] for the tweeter, whose different control (1.5 ways) results in a slightly downward radiation. As a stage loudspeaker is usually positioned above the audience, a correct sound distribution to the audience is achieved. The mid and low frequency range are driven by a 2.5 way concept by adding further drivers in the low frequency range.  
Das Gehäuse besteht aus vier Modulen und kann zum Transport zerlegt werden.  
+
The cabinet consists of five cabinet modules and can be disassembled for transport. The individual components are:
 +
* base with integrated crossover network
 +
* low bass module
 +
* lower bass / midrange module
 +
* tweeter module
 +
* upper bass/bass/midrange module
 +
* 2 stainless steel side panels
 +
* 4 rear panels
  
Entwickelt: 2004
+
The ''Heaven's Gate'' was disassembled again in 2018 to use individual parts in other speakers. 
  
*Art: Standlautsprecher
+
'''Concept'''<br />
*Wege: 1,5 + 2,5
+
*Type: floorstanding loudspeaker
*Gehäuse: geschlossen
+
*way: 1.5 + 2.5
*Maße (H x B x T): 259 cm x 45 cm x 89 cm
+
cabinet: closed
Neupreis: 84000 Euro
+
*Dimensions (H x W x D): 259 cm x 45 cm x 89 cm
 +
weight: 250 kg / piece
 +
new price: 84000 Euro
  
== Bestückung ==
+
==== Equipment ====
  
*Hochton: 3 x ESS AMT 1
+
*Tweeter: 3 x [[ESS Heil AMT 1]]
*Mittelton: 2 x Seas Excel W18EX001
+
*Midrange: 2 x [[Seas Excel W18 EX001]]
*Tiefton: 4 x Eton 12-680/62 Hex
+
*Low frequency: 4 x [[Eton 12-680/62 Hex]]
 +
*interior cabling: van den Hul
  
== Frequenzweiche ==
+
minimum listening distance: 4 - 5 m
  
Die Frequenzweichenbauteile in Serie zu den Chassis sind von folgenden Bauarten: <br />
+
<gallery>
Hochtonlautsprecher: Mundorf Mox Widerstände / Intertechnik Audyn Plus Kondensator<br />
+
File:F heavens-gate technik(2).pdf|Technical description
Hochtonlautsprecher mit Bandpassfilter: zusätzlich Intertechnik Tri Therm Spule<br />
+
</gallery>
Mitteltonlautsprecher: Intertechnik Tri Therm Spule / Audyn Plus Kondensator + Mundorf M-Cap Kondensatoren<br />
 
Basslautsprecher: Luftspule Mundorf L300<br />
 
Tiefbasslautsprecher: zusätzlich Mundorf T130
 
  
== Bilder ==
+
==== Crossover ====
 +
 
 +
The crossover components in series to the drivers are of the following types: <br />
 +
tweeter: Mundorf Mox resistors / Intertechnik Audyn Plus capacitor<br />
 +
tweeter with band pass filter: additional Intertechnik Tri Therm coil<br />
 +
midrange driver: Intertechnik Tri Therm coil / Audyn Plus capacitor + Mundorf M-Cap capacitors<br />
 +
Bass driver: Mundorf L300 air core coil<br />
 +
bass driver: additional Mundorf T130
 +
 
 +
== Pictures ==
 +
<gallery>
 +
File:Myro Heaven's Gate.jpg|Myro Heaven's Gate
 +
File:Stage1.jpg
 +
File:Heavens Gate wine market2004 600x720.jpg|Celler wine market 2004
 +
file:P heaven brass04.png
 +
file:Heavens Gate Modular 600x800.jpg|The modules
 +
</gallery>
 +
 
 +
<zurück: ''[[Myro Lautsprecher]]''><br />
 +
<zurück: ''[[Myro]]''>

Latest revision as of 17:24, 27 August 2018

Description[edit]

Very large loudspeaker with modular housing for sound reinforcement in event and stage technology. It contains an array of three air motion transformers ESS Heil AMT 1 for the tweeter, whose different control (1.5 ways) results in a slightly downward radiation. As a stage loudspeaker is usually positioned above the audience, a correct sound distribution to the audience is achieved. The mid and low frequency range are driven by a 2.5 way concept by adding further drivers in the low frequency range. The cabinet consists of five cabinet modules and can be disassembled for transport. The individual components are:

  • base with integrated crossover network
  • low bass module
  • lower bass / midrange module
  • tweeter module
  • upper bass/bass/midrange module
  • 2 stainless steel side panels
  • 4 rear panels

The Heaven's Gate was disassembled again in 2018 to use individual parts in other speakers.

Concept

  • Type: floorstanding loudspeaker
  • way: 1.5 + 2.5

cabinet: closed

  • Dimensions (H x W x D): 259 cm x 45 cm x 89 cm

weight: 250 kg / piece new price: 84000 Euro

Equipment[edit]

minimum listening distance: 4 - 5 m

Crossover[edit]

The crossover components in series to the drivers are of the following types:
tweeter: Mundorf Mox resistors / Intertechnik Audyn Plus capacitor
tweeter with band pass filter: additional Intertechnik Tri Therm coil
midrange driver: Intertechnik Tri Therm coil / Audyn Plus capacitor + Mundorf M-Cap capacitors
Bass driver: Mundorf L300 air core coil
bass driver: additional Mundorf T130

Pictures[edit]

<zurück: Myro Lautsprecher>
<zurück: Myro>