Difference between revisions of "Nikko 6065"
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Nikko]] |
− | * | + | * Model: 6065 |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1976 - 1978 |
− | * | + | * Made in: Japan |
− | * | + | * Color: silver or black |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 310 W |
− | * | + | * Dimensions: 480 x 160 x 360 mm (WxHxD) |
− | * | + | * Weight: 10.8 kg |
− | * | + | * Original price approx.: 960 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono: 2 | + | ** Phono: 2.5 mV, 50 kOhm |
− | + | Aux: 180 mV, 100 kOhm | |
** Tape Play 1, 2: 180 mV, 100 kOhm | ** Tape Play 1, 2: 180 mV, 100 kOhm | ||
− | + | FM antenna: 300 Ohm / 75 Ohm | |
− | ** MW | + | ** MW antenna: 300 Ohm |
− | * | + | * Number of outputs: |
** Tape Rec 1, 2: 170 mV | ** Tape Rec 1, 2: 170 mV | ||
− | + | Tape Rec DIN: 30 mV | |
− | ** | + | ** Headphones: 200 Ohm (6,3mm jack, front) |
− | ** 2 | + | ** 2 pairs of speakers: (4-16 Ohm) |
− | ''' | + | '''Technical Data''' |
− | '' | + | '''Amplifier''' |
− | * | + | * Continuous power (at distortion): |
** 8 Ohm: 2x 34 W RMS | ** 8 Ohm: 2x 34 W RMS | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Dynamic power: |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0,5 % |
− | * | + | * Attenuation factor: > 40 |
− | * | + | * Frequency response: 20 Hz - 20 kHz |
− | * | + | * Signal-to-noise ratio: |
** Phono MM: 70 dB | ** Phono MM: 70 dB | ||
− | + | High level: 90 dB | |
− | + | * Tone control: | |
− | * | + | ** Bass: yes, ± 10 dB at 70 Hz |
− | ** Bass: | + | treble: yes, ± 10 dB at 10 kHz |
− | + | * Loudness: yes, + 10 dB at 70 Hz, + 5 dB at 10 kHz | |
− | * Loudness: | + | * High Filter: - 3 dB at 5 kHz (- 6 dB / octave) |
− | * High Filter: - 3 dB | ||
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87 - 108 MHz |
− | + | MW: 525 - 1'605 kHz | |
− | * | + | * Frequency response: 30 - 15'000 Hz, ± 0,5 dB |
− | ** | + | ** VHF: 1.8 µV |
** MW: 150 µV | ** MW: 150 µV | ||
− | * | + | * Distortion factor: |
− | ** | + | ** FM: 0.2 % /0.5 % (mono/stereo) |
− | + | Signal-to-noise ratio: 70 dB / 66 dB (mono/stereo) | |
− | * | + | * Channel separation: |
− | ** | + | ** FM: > 40 dB |
− | * | + | * Selectivity: |
− | ** | + | ** FM: > 70 dB |
− | + | MW: 30 dB | |
− | * | + | * Common wave selection: |
− | ** | + | ** FM: 1.8 dB |
− | * | + | * Spurious wave selection: |
− | ** | + | ** FM: |
− | * | + | * Image frequency attenuation: |
− | ** | + | ** FM: 80 dB |
** MW: 50 dB | ** MW: 50 dB | ||
− | + | IF attenuation: | |
− | ** | + | ** VHF: 90 dB |
** MW: 50 dB | ** MW: 50 dB | ||
− | * AM | + | * AM suppression: 60 dB |
− | ''' | + | '''Special Features''' |
* Tape Dubbing | * Tape Dubbing | ||
− | * | + | * VHF muting |
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
* [[Nikko 3035]] | * [[Nikko 3035]] | ||
* [[Nikko 5055]] | * [[Nikko 5055]] | ||
Line 98: | Line 97: | ||
− | == | + | == Pictures == |
− | * | + | * Image: Nikko 6065 |
− | [[ | + | [[File:Nikko 6065-1.jpg]] |
− | == | + | == Reports == |
− | * | + | * Review by "Good Old Hifi": [[http://www.good-old-hifi.de/nikko-7075/]] |
Line 110: | Line 109: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 01:07, 25 August 2018
Data[edit]
General
- Manufacturer: Nikko
- Model: 6065
- Type: Receiver
- Years of manufacture: 1976 - 1978
- Made in: Japan
- Color: silver or black
- Remote control: no
- Power consumption: 310 W
- Dimensions: 480 x 160 x 360 mm (WxHxD)
- Weight: 10.8 kg
- Original price approx.: 960 DM
Connections
- Number of inputs:
- Phono: 2.5 mV, 50 kOhm
Aux: 180 mV, 100 kOhm
- Tape Play 1, 2: 180 mV, 100 kOhm
FM antenna: 300 Ohm / 75 Ohm
- MW antenna: 300 Ohm
- Number of outputs:
- Tape Rec 1, 2: 170 mV
Tape Rec DIN: 30 mV
- Headphones: 200 Ohm (6,3mm jack, front)
- 2 pairs of speakers: (4-16 Ohm)
Technical Data
Amplifier
- Continuous power (at distortion):
- 8 Ohm: 2x 34 W RMS
- 4 Ohm:
- Dynamic power:
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0,5 %
- Attenuation factor: > 40
- Frequency response: 20 Hz - 20 kHz
- Signal-to-noise ratio:
- Phono MM: 70 dB
High level: 90 dB
- Tone control:
- Bass: yes, ± 10 dB at 70 Hz
treble: yes, ± 10 dB at 10 kHz
- Loudness: yes, + 10 dB at 70 Hz, + 5 dB at 10 kHz
- High Filter: - 3 dB at 5 kHz (- 6 dB / octave)
- Low Filter (Subsonic):
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87 - 108 MHz
MW: 525 - 1'605 kHz
- Frequency response: 30 - 15'000 Hz, ± 0,5 dB
- VHF: 1.8 µV
- MW: 150 µV
- Distortion factor:
- FM: 0.2 % /0.5 % (mono/stereo)
Signal-to-noise ratio: 70 dB / 66 dB (mono/stereo)
- Channel separation:
- FM: > 40 dB
- Selectivity:
- FM: > 70 dB
MW: 30 dB
- Common wave selection:
- FM: 1.8 dB
- Spurious wave selection:
- FM:
- Image frequency attenuation:
- FM: 80 dB
- MW: 50 dB
IF attenuation:
- VHF: 90 dB
- MW: 50 dB
- AM suppression: 60 dB
Special Features
- Tape Dubbing
- VHF muting
Remarks[edit]
- Other models in the same series:
- Nikko 3035
- Nikko 5055
- Nikko 6065
- Nikko 7075
- Nikko 8085
- Nikko 9095
Pictures[edit]
- Image: Nikko 6065
Reports[edit]
- Review by "Good Old Hifi": [[1]]