Difference between revisions of "Nikko 9095"
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Nikko]] |
− | * | + | * Model: 9095 |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1976 - 1979 |
− | * | + | * Made in: Japan |
− | * | + | * Color: silver, wooden case |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 530 W max. |
− | * | + | * Dimensions: 480 x 165 x 390 mm (WxHxD) |
− | * | + | * Weight: 15 kg |
− | * | + | * Original price approx.: 1'898 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
** Phono 1, 2: 3 mV, 50 kOhm | ** Phono 1, 2: 3 mV, 50 kOhm | ||
− | ** | + | ** Microphone: 3 mV, 50 kOhm |
** Aux 1: 200 mV, 100 kOhm | ** Aux 1: 200 mV, 100 kOhm | ||
** Aux 2: 500 mV, 120 kOhm | ** Aux 2: 500 mV, 120 kOhm | ||
** Tape Play 1, 2: 200 mV, 100 kOhm | ** Tape Play 1, 2: 200 mV, 100 kOhm | ||
− | ** 4- | + | ** Tape Play 2 4-channel adapter: 200 mV, 100 kOhm |
− | ** Main In: | + | ** Main In: 1300 mV, 100 kOhm |
− | + | FM antenna: 300 Ohm / 75 Ohm | |
− | ** MW | + | ** MW antenna: 300 Ohm |
− | * | + | * Number of outputs: |
** Tape Rec 1, 2: 200 mV | ** Tape Rec 1, 2: 200 mV | ||
+ | ** Tape Rec 2 4-channel adapter: 200 mV | ||
** Tape Rec DIN: 40 mV | ** Tape Rec DIN: 40 mV | ||
− | ** 4- | + | ** 4-Channel Out: 130 mV |
− | ** | + | ** Pre Out: |
− | ** 3 | + | ** Headphones: 200 Ohm (6,3mm jack, front) |
+ | ** 3 speaker pairs: (4-16 Ohm) | ||
− | ''' | + | '''Technical Data''' |
− | '' | + | '''Amplifier''' |
− | * | + | * Continuous power (at distortion): |
− | ** 8 Ohm: 2x | + | ** 8 Ohm: 2x 60 W RMS |
− | + | 4 Ohm: 2x 70 W | |
− | * | + | * Dynamic power: |
− | ** 8 Ohm: | + | ** 8 Ohm: 180 W |
− | ** 4 Ohm: | + | ** 4 Ohm: 190 W |
− | * | + | * Total harmonic distortion: 0.5 |
− | * | + | * Attenuation factor: > 32 |
− | * | + | * Frequency response: 10 Hz - 50 kHz |
− | * | + | * Signal-to-noise ratio: |
** Phono MM: 65 dB | ** Phono MM: 65 dB | ||
− | ** | + | ** Microphone: 70 dB |
− | ** | + | ** High level: 80 dB |
− | * | + | * Tone control: |
− | ** Bass: | + | ** Bass: yes, ± 10 dB at 70 Hz |
− | ** | + | ** Mid: yes, ± 6 dB at 1 kHz |
− | ** | + | ** Treble: yes, ± 10 dB at 10 kHz |
− | * Loudness: | + | * Loudness: yes, + 10 dB at 70 Hz, + 5 dB at 10 kHz |
− | * High Filter: - 3 dB | + | * High Filter: - 3 dB at 5 kHz (- 6 dB / octave) |
− | * Low Filter (Subsonic): | + | * Low Filter (Subsonic): - 3 dB at 100 Hz (- 6 dB / octave) |
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87 - 108 MHz |
− | + | MW: 525 - 1'605 kHz | |
− | * | + | * Frequency response: 30 - 15'000 Hz, ± 0,5 dB |
− | ** | + | ** VHF: 1.8 µV |
** MW: 150 µV | ** MW: 150 µV | ||
− | * | + | * Distortion factor: |
− | ** | + | ** FM: 0.2 % /0.5 % (mono/stereo) |
− | + | Signal-to-noise ratio: 70 dB / 66 dB (mono/stereo) | |
− | * | + | * Channel separation: |
− | ** | + | ** FM: > 40 dB |
− | * | + | * Selectivity: |
− | ** | + | ** FM: > 70 dB |
− | + | MW: 30 dB | |
− | * | + | * Common wave selection: |
− | ** | + | ** FM: 1.8 dB |
− | * | + | * Spurious wave selection: |
− | ** | + | ** FM: |
− | * | + | * Mirror frequency attenuation: |
− | ** | + | ** FM: 80 dB |
** MW: 50 dB | ** MW: 50 dB | ||
− | + | IF attenuation: | |
− | ** | + | ** VHF: 90 dB |
** MW: 50 dB | ** MW: 50 dB | ||
− | * AM | + | * AM suppression: 60 dB |
− | ''' | + | '''Special Features''' |
* Tape Dubbing | * Tape Dubbing | ||
− | * Tape 2, | + | * Tape 2, input and output with 6.3mm jack, front |
− | * | + | * Microphone mixer |
− | * | + | * VHF muting |
− | * | + | * VHF 4-channel output |
* High Blend Filter | * High Blend Filter | ||
− | == | + | == Comments == |
− | * | + | * Other models in the same series: |
− | * [[Nikko | + | * [[Nikko 3035]] |
− | * [[Nikko | + | * [[Nikko 5055]] |
− | * [[Nikko | + | * [[Nikko 6065]] |
− | * [[Nikko | + | * [[Nikko 7075]] |
− | * [[Nikko | + | * [[Nikko 8085]] |
+ | * [[Nikko 9095]] | ||
− | == | + | == Pictures == |
− | * | + | * Image: Nikko 9095 |
− | [[ | + | [[File:Nikko 9095-3.jpg|1700px]] |
− | * | + | * Image: Nikko 9095 backside |
− | [[ | + | [[File:Nikko 9095-3.jpg|1700px]] |
− | == | + | == Reports == |
Line 122: | Line 125: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 00:54, 25 August 2018
Data[edit]
General
- Manufacturer: Nikko
- Model: 9095
- Type: Receiver
- Years of manufacture: 1976 - 1979
- Made in: Japan
- Color: silver, wooden case
- Remote control: no
- Power consumption: 530 W max.
- Dimensions: 480 x 165 x 390 mm (WxHxD)
- Weight: 15 kg
- Original price approx.: 1'898 DM
Connections
- Number of inputs:
- Phono 1, 2: 3 mV, 50 kOhm
- Microphone: 3 mV, 50 kOhm
- Aux 1: 200 mV, 100 kOhm
- Aux 2: 500 mV, 120 kOhm
- Tape Play 1, 2: 200 mV, 100 kOhm
- Tape Play 2 4-channel adapter: 200 mV, 100 kOhm
- Main In: 1300 mV, 100 kOhm
FM antenna: 300 Ohm / 75 Ohm
- MW antenna: 300 Ohm
- Number of outputs:
- Tape Rec 1, 2: 200 mV
- Tape Rec 2 4-channel adapter: 200 mV
- Tape Rec DIN: 40 mV
- 4-Channel Out: 130 mV
- Pre Out:
- Headphones: 200 Ohm (6,3mm jack, front)
- 3 speaker pairs: (4-16 Ohm)
Technical Data
Amplifier
- Continuous power (at distortion):
- 8 Ohm: 2x 60 W RMS
4 Ohm: 2x 70 W
- Dynamic power:
- 8 Ohm: 180 W
- 4 Ohm: 190 W
- Total harmonic distortion: 0.5
- Attenuation factor: > 32
- Frequency response: 10 Hz - 50 kHz
- Signal-to-noise ratio:
- Phono MM: 65 dB
- Microphone: 70 dB
- High level: 80 dB
- Tone control:
- Bass: yes, ± 10 dB at 70 Hz
- Mid: yes, ± 6 dB at 1 kHz
- Treble: yes, ± 10 dB at 10 kHz
- Loudness: yes, + 10 dB at 70 Hz, + 5 dB at 10 kHz
- High Filter: - 3 dB at 5 kHz (- 6 dB / octave)
- Low Filter (Subsonic): - 3 dB at 100 Hz (- 6 dB / octave)
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87 - 108 MHz
MW: 525 - 1'605 kHz
- Frequency response: 30 - 15'000 Hz, ± 0,5 dB
- VHF: 1.8 µV
- MW: 150 µV
- Distortion factor:
- FM: 0.2 % /0.5 % (mono/stereo)
Signal-to-noise ratio: 70 dB / 66 dB (mono/stereo)
- Channel separation:
- FM: > 40 dB
- Selectivity:
- FM: > 70 dB
MW: 30 dB
- Common wave selection:
- FM: 1.8 dB
- Spurious wave selection:
- FM:
- Mirror frequency attenuation:
- FM: 80 dB
- MW: 50 dB
IF attenuation:
- VHF: 90 dB
- MW: 50 dB
- AM suppression: 60 dB
Special Features
- Tape Dubbing
- Tape 2, input and output with 6.3mm jack, front
- Microphone mixer
- VHF muting
- VHF 4-channel output
- High Blend Filter
Comments[edit]
- Other models in the same series:
- Nikko 3035
- Nikko 5055
- Nikko 6065
- Nikko 7075
- Nikko 8085
- Nikko 9095
Pictures[edit]
- Image: Nikko 9095
- Image: Nikko 9095 backside