Difference between revisions of "Rotel RX-603"
| (12 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| − | {{ | + | __NOTOC__ |
| + | == Data == | ||
| + | {{navigation}} | ||
| + | '''General''' | ||
| + | * Manufacturer: [[Rotel]] | ||
| + | * Model: RX-603 | ||
| + | * Years of manufacture: 1976 - 1981 | ||
| + | * Made in: Japan | ||
| + | * Color: Silver, metal housing with handles | ||
| + | * Remote control: no | ||
| + | * Power consumption: 360 W | ||
| + | * Dimensions (WxHxD): 490 x 140 x 340 mm | ||
| + | * Weight: 11,5 kg | ||
| + | * Original price approx.: 440 US-$, corresponds to about 1'300 DM | ||
| − | |||
| − | + | '''Connections''' | |
| + | * Number of inputs: | ||
| + | ** Phono MM: 2 mV, 50 kOhm | ||
| + | Aux: 150 mV, 50 kOhm, max. 15 V | ||
| + | ** Tape Play 1, 2: 150 mV, 50 kOhm, max. 15 V | ||
| + | Main In: 1.5 V, 50 kOhm | ||
| + | ** Antenna FM (75/300 Ohm), MW (300 Ohm). | ||
| + | * Number of outputs: | ||
| + | ** Tape Rec 1, 2: 350 mV, 3.3 kOhm | ||
| + | ** Tape Rec DIN: 120 mV, 90 kOhm | ||
| + | ** Pre Out: | ||
| + | ** Headphones: | ||
| + | ** 2 pairs of speakers | ||
| − | + | ||
| + | '''Technical Specifications''' | ||
| + | |||
| + | ''Amplifier'' | ||
| + | * Continuous power (at distortion) | ||
| + | ** 8 Ohm: 2x 45 Watt (20 Hz - 20'000 Hz) | ||
| + | ** 4 Ohm: 2x 70 Watt (1 kHz) | ||
| + | * Dynamic power | ||
| + | ** 8 Ohm: | ||
| + | ** 4 Ohm: | ||
| + | * Frequency response: 10 Hz - 50 kHz, ± 3 dB | ||
| + | * Distortion factor: < 0.1 % | ||
| + | * Attenuation factor: 35 at 8 ohms | ||
| + | * Signal-to-noise ratio: | ||
| + | ** Phono MM: 75 dB | ||
| + | High level: 90 dB | ||
| + | * Tone control | ||
| + | Bass: ± 10 dB at 100 Hz | ||
| + | Treble: ± 10 dB at 10 kHz | ||
| + | * Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz | ||
| + | * High Filter: - 12 dB / octave at 8 kHz | ||
| + | |||
| + | |||
| + | ''Tuner'' | ||
| + | * Reception: FM, MW | ||
| + | * Frequencies: | ||
| + | ** FM: 87 - 108 MHz | ||
| + | MW: 525 - 1'605 kHz | ||
| + | * Frequency response: 30 - 15'000 Hz, ± 0,5 dB | ||
| + | * Input sensitivity: 1.6 µV (IHF) | ||
| + | * Distortion factor: 0.3 % (mono), 0.5 % (stereo) | ||
| + | * Signal-to-noise ratio: | ||
| + | ** Mono: 70 dB | ||
| + | Stereo: 65 dB | ||
| + | * Channel separation: 47 dB | ||
| + | * Selectivity: 75 dB | ||
| + | * Co-wave selection: 1.5 dB | ||
| + | * Spurious wave selection: > 90 dB | ||
| + | * IF attenuation: > 115 dB | ||
| + | * IF attenuation: > 115 dB (at 98 MHz) | ||
| + | * AM suppression: 65 dB | ||
| + | |||
| + | |||
| + | '''Special Features''' | ||
| + | * Tape dubbing | ||
| + | * Muting | ||
| + | * VHF de-emphasis switch | ||
| + | |||
| + | |||
| + | == Comments == | ||
| + | * Other models in the same series: | ||
| + | ** [[Rotel RX-303]] | ||
| + | ** [[Rotel RX-403]] | ||
| + | ** [[Rotel RX-503]] | ||
| + | ** [[Rotel RX-603]] | ||
| + | ** [[Rotel RX-803]] | ||
| + | ** [[Rotel RX-1203]] | ||
| + | ** [[Rotel RX-1603]] | ||
| + | |||
| + | |||
| + | == Pictures == | ||
| + | * Image: Rotel RX-603 | ||
| + | [[File: rotel_rx_603_front.jpg]] | ||
| + | |||
| + | |||
| + | * Picture: Rotel RX-603 rear | ||
| + | [[File: rotel_rx_603_front.jpg]] | ||
| + | |||
| + | |||
| + | * Extract from brochure: Rotel RX-603 | ||
| + | [[File:Rotel RX-603-Prospekt-1.jpg]] | ||
| + | |||
| + | |||
| + | == Reports == | ||
| + | |||
| + | |||
| + | == Links == | ||
| + | |||
| + | [[Category:Receiver]] | ||
Latest revision as of 03:32, 20 August 2018
Data[edit]
General
- Manufacturer: Rotel
- Model: RX-603
- Years of manufacture: 1976 - 1981
- Made in: Japan
- Color: Silver, metal housing with handles
- Remote control: no
- Power consumption: 360 W
- Dimensions (WxHxD): 490 x 140 x 340 mm
- Weight: 11,5 kg
- Original price approx.: 440 US-$, corresponds to about 1'300 DM
Connections
- Number of inputs:
- Phono MM: 2 mV, 50 kOhm
Aux: 150 mV, 50 kOhm, max. 15 V
- Tape Play 1, 2: 150 mV, 50 kOhm, max. 15 V
Main In: 1.5 V, 50 kOhm
- Antenna FM (75/300 Ohm), MW (300 Ohm).
- Number of outputs:
- Tape Rec 1, 2: 350 mV, 3.3 kOhm
- Tape Rec DIN: 120 mV, 90 kOhm
- Pre Out:
- Headphones:
- 2 pairs of speakers
Technical Specifications
Amplifier
- Continuous power (at distortion)
- 8 Ohm: 2x 45 Watt (20 Hz - 20'000 Hz)
- 4 Ohm: 2x 70 Watt (1 kHz)
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Frequency response: 10 Hz - 50 kHz, ± 3 dB
- Distortion factor: < 0.1 %
- Attenuation factor: 35 at 8 ohms
- Signal-to-noise ratio:
- Phono MM: 75 dB
High level: 90 dB
- Tone control
Bass: ± 10 dB at 100 Hz Treble: ± 10 dB at 10 kHz
- Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz
- High Filter: - 12 dB / octave at 8 kHz
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87 - 108 MHz
MW: 525 - 1'605 kHz
- Frequency response: 30 - 15'000 Hz, ± 0,5 dB
- Input sensitivity: 1.6 µV (IHF)
- Distortion factor: 0.3 % (mono), 0.5 % (stereo)
- Signal-to-noise ratio:
- Mono: 70 dB
Stereo: 65 dB
- Channel separation: 47 dB
- Selectivity: 75 dB
- Co-wave selection: 1.5 dB
- Spurious wave selection: > 90 dB
- IF attenuation: > 115 dB
- IF attenuation: > 115 dB (at 98 MHz)
- AM suppression: 65 dB
Special Features
- Tape dubbing
- Muting
- VHF de-emphasis switch
Comments[edit]
- Other models in the same series:
Pictures[edit]
- Image: Rotel RX-603
- Picture: Rotel RX-603 rear
- Extract from brochure: Rotel RX-603
