Difference between revisions of "Rotel RX-603"
 
(10 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
== Daten ==
+
__NOTOC__
−
{{Navigation}}
+
== Data ==
−
'''Allgemein'''
+
{{navigation}}
−
* Hersteller: [[Rotel]]
+
'''General'''
−
* Modell: RX-603
+
* Manufacturer: [[Rotel]]
−
* Baujahre:  
+
* Model: RX-603
−
* Hergestellt in:Japan Tokyo
+
* Years of manufacture: 1976 - 1981
−
* Farbe: silber
+
* Made in: Japan
−
* Fernbedienung: Nein
+
* Color: Silver, metal housing with handles
−
* Leistungsaufnahme: 360 Watt
+
* Remote control: no
−
* Abmessungen: 49x14x34cm
+
* Power consumption: 360 W
−
* Gewicht: 11,5 kg
+
* Dimensions (WxHxD): 490 x 140 x 340 mm
−
* Neupreis ca.:
+
* Weight: 11,5 kg
 +
* Original price approx.: 440 US-$, corresponds to about 1'300 DM
  
  
−
'''Anschlüsse'''
+
'''Connections'''
−
* Anzahl der Eingänge:
+
* Number of inputs:
−
** 1x Phono
+
** Phono MM: 2 mV, 50 kOhm
−
** Tuner, 1x Tape
+
Aux: 150 mV, 50 kOhm, max. 15 V
−
** Power In
+
** Tape Play 1, 2: 150 mV, 50 kOhm, max. 15 V
−
* Anzahl der Ausgänge:
+
Main In: 1.5 V, 50 kOhm
−
** Kopfhörer
+
** Antenna FM (75/300 Ohm), MW (300 Ohm).
−
** 2 Lautsprecherpaare (A,B)
+
* Number of outputs:
−
** 1 Tape
+
** Tape Rec 1, 2: 350 mV, 3.3 kOhm
 +
** Tape Rec DIN: 120 mV, 90 kOhm
 +
** Pre Out:
 +
** Headphones:
 +
** 2 pairs of speakers
  
  
−
'''Technische Daten'''
+
'''Technical Specifications'''
−
* Dauerleistung (bei Klirrfaktor)
 
−
** 4 Ohm: 2x 60 W (1 kHz)
 
  
−
* Klangregelung:
+
''Amplifier''
−
** Bass: ja
+
* Continuous power (at distortion)
−
** Höhen: ja
+
** 8 Ohm: 2x 45 Watt (20 Hz - 20'000 Hz)
−
* Loudness: ja
+
** 4 Ohm: 2x 70 Watt (1 kHz)
−
* Mute: nein
+
* Dynamic power
 +
** 8 Ohm:
 +
** 4 Ohm:
 +
* Frequency response: 10 Hz - 50 kHz, ± 3 dB
 +
* Distortion factor: < 0.1 %
 +
* Attenuation factor: 35 at 8 ohms
 +
* Signal-to-noise ratio:
 +
** Phono MM: 75 dB
 +
High level: 90 dB
 +
* Tone control
 +
Bass: ± 10 dB at 100 Hz
 +
Treble: ± 10 dB at 10 kHz
 +
* Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz
 +
* High Filter: - 12 dB / octave at 8 kHz
  
−
== Bilder ==
 
  
−
* Frontansicht:
+
''Tuner''
−
[[Datei: rotel_rx_603_front.jpg]]
+
* Reception: FM, MW
 +
* Frequencies:
 +
** FM: 87 - 108 MHz
 +
MW: 525 - 1'605 kHz
 +
* Frequency response: 30 - 15'000 Hz, ± 0,5 dB
 +
* Input sensitivity: 1.6 µV (IHF)
 +
* Distortion factor: 0.3 % (mono), 0.5 % (stereo)
 +
* Signal-to-noise ratio:
 +
** Mono: 70 dB
 +
Stereo: 65 dB
 +
* Channel separation: 47 dB
 +
* Selectivity: 75 dB
 +
* Co-wave selection: 1.5 dB
 +
* Spurious wave selection: > 90 dB
 +
* IF attenuation: > 115 dB
 +
* IF attenuation: > 115 dB (at 98 MHz)
 +
* AM suppression: 65 dB
  
−
* Rückansicht:
+
 
−
[[Datei: IMG_3147.JPG]]
+
'''Special Features'''
 +
* Tape dubbing
 +
* Muting
 +
* VHF de-emphasis switch
 +
 
 +
 
 +
== Comments ==
 +
* Other models in the same series:
 +
** [[Rotel RX-303]]
 +
** [[Rotel RX-403]]
 +
** [[Rotel RX-503]]
 +
** [[Rotel RX-603]]
 +
** [[Rotel RX-803]]
 +
** [[Rotel RX-1203]]
 +
** [[Rotel RX-1603]]
 +
 
 +
 
 +
== Pictures ==
 +
* Image: Rotel RX-603
 +
[[File: rotel_rx_603_front.jpg]]
 +
 
 +
 
 +
* Picture: Rotel RX-603 rear
 +
[[File: rotel_rx_603_front.jpg]]
 +
 
 +
 
 +
* Extract from brochure: Rotel RX-603
 +
[[File:Rotel RX-603-Prospekt-1.jpg]]
 +
 
 +
 
 +
== Reports ==
 +
 
 +
 
 +
== Links ==
 +
 
 +
[[Category:Receiver]]

Latest revision as of 04:32, 20 August 2018

Data[edit]

General

  • Manufacturer: Rotel
  • Model: RX-603
  • Years of manufacture: 1976 - 1981
  • Made in: Japan
  • Color: Silver, metal housing with handles
  • Remote control: no
  • Power consumption: 360 W
  • Dimensions (WxHxD): 490 x 140 x 340 mm
  • Weight: 11,5 kg
  • Original price approx.: 440 US-$, corresponds to about 1'300 DM


Connections

  • Number of inputs:
    • Phono MM: 2 mV, 50 kOhm

Aux: 150 mV, 50 kOhm, max. 15 V

    • Tape Play 1, 2: 150 mV, 50 kOhm, max. 15 V

Main In: 1.5 V, 50 kOhm

    • Antenna FM (75/300 Ohm), MW (300 Ohm).
  • Number of outputs:
    • Tape Rec 1, 2: 350 mV, 3.3 kOhm
    • Tape Rec DIN: 120 mV, 90 kOhm
    • Pre Out:
    • Headphones:
    • 2 pairs of speakers


Technical Specifications

Amplifier

  • Continuous power (at distortion)
    • 8 Ohm: 2x 45 Watt (20 Hz - 20'000 Hz)
    • 4 Ohm: 2x 70 Watt (1 kHz)
  • Dynamic power
    • 8 Ohm:
    • 4 Ohm:
  • Frequency response: 10 Hz - 50 kHz, ± 3 dB
  • Distortion factor: < 0.1 %
  • Attenuation factor: 35 at 8 ohms
  • Signal-to-noise ratio:
    • Phono MM: 75 dB

High level: 90 dB

  • Tone control

Bass: ± 10 dB at 100 Hz Treble: ± 10 dB at 10 kHz

  • Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz
  • High Filter: - 12 dB / octave at 8 kHz


Tuner

  • Reception: FM, MW
  • Frequencies:
    • FM: 87 - 108 MHz

MW: 525 - 1'605 kHz

  • Frequency response: 30 - 15'000 Hz, ± 0,5 dB
  • Input sensitivity: 1.6 µV (IHF)
  • Distortion factor: 0.3 % (mono), 0.5 % (stereo)
  • Signal-to-noise ratio:
    • Mono: 70 dB

Stereo: 65 dB

  • Channel separation: 47 dB
  • Selectivity: 75 dB
  • Co-wave selection: 1.5 dB
  • Spurious wave selection: > 90 dB
  • IF attenuation: > 115 dB
  • IF attenuation: > 115 dB (at 98 MHz)
  • AM suppression: 65 dB


Special Features

  • Tape dubbing
  • Muting
  • VHF de-emphasis switch


Comments[edit]


Pictures[edit]

  • Image: Rotel RX-603

Rotel rx 603 front.jpg


  • Picture: Rotel RX-603 rear

Rotel rx 603 front.jpg


  • Extract from brochure: Rotel RX-603

Rotel RX-603-Prospekt-1.jpg


Reports[edit]

Links[edit]

Retrieved from "https://hifi-wiki.com/index.php?title=Rotel_RX-603&oldid=140382"