Difference between revisions of "Yamaha CR-1020"
(→Berichte) |
|||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Yamaha]] |
− | * | + | * Model: CR-1020 |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1977 - 1979 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver |
− | * | + | * Remote control: No |
− | * | + | * Power consumption: 520 watts |
− | * | + | * Dimensions: 521 x 147 x 415 mm (WxHxD) |
− | * | + | * Weight: 18,3 kg |
+ | * Original price: 1'598 DM | ||
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** | + | ** Antenna, 2xPhono, 2xTape, Aux |
− | * | + | * Number of outputs: |
− | ** | + | ** 3xspeaker, 2xheadphone, 2xRec-Out |
− | ''' | + | '''Technical Data''' |
− | '' | + | '''Amplifier''' |
− | * | + | * Continuous power (at distortion): |
** 8 Ohm: 2x 75 Watt | ** 8 Ohm: 2x 75 Watt | ||
− | + | 4 Ohm: 2x 90 Watt | |
− | * | + | * Dynamic power: |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.01% |
− | * | + | * Attenuation factor: 40 |
− | * | + | * Inputs (sensitivity/impedance) |
− | ** Phono mag. I: | + | ** Phono mag. I: 2 mV 47 kΩ |
** Phono mag. II: 2 mV 47 kΩ | ** Phono mag. II: 2 mV 47 kΩ | ||
** Aux: 120 mV 45 kΩ | ** Aux: 120 mV 45 kΩ | ||
− | ** | + | ** Tape: 2 x 120 mV 45 kΩ |
− | * | + | * Output (level/impedance): |
− | * | + | * Frequency response over all: 10-100000 Hz (+/- 2.5 dB). |
− | * | + | * Tone control: |
− | ** Bass: | + | ** Bass: Yes |
− | ** | + | ** Mids: Yes |
− | ** | + | ** Treble: Yes |
− | ** Loudness: | + | ** Loudness: Yes, can be switched off |
− | ** Subsonic: | + | ** Subsonic: No |
− | * Mute: | + | * Mute: Yes |
− | * Direct/Line-Straight: | + | * Direct/Line-Straight: No |
− | * | + | * Ripple distance (shorted): |
− | * | + | * Stereo Channel Separation: |
− | * | + | * Signal-to-noise ratio: 100 dB |
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception Ranges: |
− | ** | + | ** FM / MW |
− | * | + | * Frequency ranges: |
− | ** | + | ** FM: 88-108 MHz |
− | + | MW: 525-1605 kHz | |
− | * | + | * Frequency response: 30-15000 Hz |
− | * | + | * Input sensitivity: 1.3/40µV (DIN) |
− | * | + | * Distortion factor: 0.25% (stereo) |
− | * | + | * Signal-to-noise ratio: 67 dB (stereo) |
− | * | + | * Crosstalk attenuation: 50 dB |
− | * | + | * Selectivity: 60 dB (DIN) |
− | * | + | * Co-wave selection: 1 dB |
− | * | + | * Spurious wave selection: 75 dB |
− | * | + | * Image frequency attenuation: 85 dB |
− | * | + | * IF attenuation: 90 dB |
− | * AM | + | * AM suppression: 65 dB |
− | * | + | * Output level: |
− | * RDS: | + | * RDS: No |
− | * | + | * Station memory: No |
− | ''' | + | '''Special Features''' |
* High-Filter | * High-Filter | ||
* Low-Filter | * Low-Filter | ||
− | * Mono/Stereo/Stereo Reverse | + | * Mono/Stereo/Stereo Reverse switchable |
− | * Record | + | * Record selector |
− | * | + | * Transmitter center display |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | == | + | == Remarks == |
− | + | * Other models in the same series: | |
+ | * [[Yamaha CR-220]] | ||
+ | * [[Yamaha CR-420]] | ||
+ | * [[Yamaha CR-620]] | ||
+ | * [[Yamaha CR-820]] | ||
+ | * [[Yamaha CR-1020]] | ||
+ | * [[Yamaha CR-2020]] | ||
+ | * [[Yamaha CR-3020]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | * Extract from brochure: Yamaha CR-1020 | ||
+ | [[Datei:Yamaha CR-1020-Prospekt-1.jpg]] | ||
+ | |||
+ | |||
+ | == Reviews == | ||
+ | * These are one o f the best. I still have mine operating, and the soundwall is equal to receivers coston for $2000 and up | ||
− | |||
− | |||
== Links == | == Links == | ||
− | [[ | + | |
+ | [[Category:Receiver]] |
Latest revision as of 02:49, 16 August 2018
Data[edit]
General
- Manufacturer: Yamaha
- Model: CR-1020
- Type: Receiver
- Years of manufacture: 1977 - 1979
- Made in: Japan
- Color: Silver
- Remote control: No
- Power consumption: 520 watts
- Dimensions: 521 x 147 x 415 mm (WxHxD)
- Weight: 18,3 kg
- Original price: 1'598 DM
Connections
- Number of inputs:
- Antenna, 2xPhono, 2xTape, Aux
- Number of outputs:
- 3xspeaker, 2xheadphone, 2xRec-Out
Technical Data
Amplifier
- Continuous power (at distortion):
- 8 Ohm: 2x 75 Watt
4 Ohm: 2x 90 Watt
- Dynamic power:
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.01%
- Attenuation factor: 40
- Inputs (sensitivity/impedance)
- Phono mag. I: 2 mV 47 kΩ
- Phono mag. II: 2 mV 47 kΩ
- Aux: 120 mV 45 kΩ
- Tape: 2 x 120 mV 45 kΩ
- Output (level/impedance):
- Frequency response over all: 10-100000 Hz (+/- 2.5 dB).
- Tone control:
- Bass: Yes
- Mids: Yes
- Treble: Yes
- Loudness: Yes, can be switched off
- Subsonic: No
- Mute: Yes
- Direct/Line-Straight: No
- Ripple distance (shorted):
- Stereo Channel Separation:
- Signal-to-noise ratio: 100 dB
Tuner
- Reception Ranges:
- FM / MW
- Frequency ranges:
- FM: 88-108 MHz
MW: 525-1605 kHz
- Frequency response: 30-15000 Hz
- Input sensitivity: 1.3/40µV (DIN)
- Distortion factor: 0.25% (stereo)
- Signal-to-noise ratio: 67 dB (stereo)
- Crosstalk attenuation: 50 dB
- Selectivity: 60 dB (DIN)
- Co-wave selection: 1 dB
- Spurious wave selection: 75 dB
- Image frequency attenuation: 85 dB
- IF attenuation: 90 dB
- AM suppression: 65 dB
- Output level:
- RDS: No
- Station memory: No
Special Features
- High-Filter
- Low-Filter
- Mono/Stereo/Stereo Reverse switchable
- Record selector
- Transmitter center display
Remarks[edit]
- Other models in the same series:
- Yamaha CR-220
- Yamaha CR-420
- Yamaha CR-620
- Yamaha CR-820
- Yamaha CR-1020
- Yamaha CR-2020
- Yamaha CR-3020
Pictures[edit]
- Extract from brochure: Yamaha CR-1020
Datei:Yamaha CR-1020-Prospekt-1.jpg
Reviews[edit]
- These are one o f the best. I still have mine operating, and the soundwall is equal to receivers coston for $2000 and up