Difference between revisions of "Sony DTC-2000 Es"
(→Bemerkungen) |
|||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | == Short description == |
| − | + | Space for a few introductory sentences about the device. | |
| − | == | + | == Data == |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Sony]] |
| − | * | + | * Model: DTC-2000 ES |
| − | * | + | * Years of manufacture: 1993-? |
| − | * | + | * Made in: Japan |
| − | * | + | * Color:champagne, black |
| − | * | + | * Dimensions: 470 x 135 x 380 mm (W x H x D) |
| − | * | + | * Weight: 12,5 kg |
| − | * | + | * Original price : 3.900.- DM (RRP) |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: 4 |
* Line In Cinch: 47 kOhm | * Line In Cinch: 47 kOhm | ||
* Digital In Cinch: 75 Ohm | * Digital In Cinch: 75 Ohm | ||
* Digital In Opto 2x | * Digital In Opto 2x | ||
| − | * | + | * Number of outputs: 3 |
* Line Out Cinch: 470 Ohm | * Line Out Cinch: 470 Ohm | ||
* Digital Out Cinch: 75 Ohm | * Digital Out Cinch: 75 Ohm | ||
* Headphones: 220 Ohm | * Headphones: 220 Ohm | ||
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Sampling Frequency: |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | * 48 kHz | |
| − | + | * 44.1 kHz | |
| − | + | * 32 kHz | |
| − | |||
| − | * 48 kHz | ||
| − | * 44 | ||
| − | * 32 kHz | ||
| − | |||
| − | * | + | * Tape speed: |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | * Standard: 8.15 mm/s | |
| − | * | + | * Longplay: 4.075 mm/s |
| − | * | + | * D/A converter: 1-bit D/A converter |
| − | + | * Frequency Response: | |
| − | == | + | * Standard: 2 - 22000 Hz |
| + | * Longplay: 2 - 14500 Hz | ||
| + | * Dynamic range: over 94 dB | ||
| + | Signal to Noise Ratio: over 94 dB | ||
| + | |||
| + | * Distortion factor: | ||
| + | |||
| + | * Standard: Less than 0.0045% | ||
| + | * Longplay: Under 0.08 | ||
| + | |||
| + | '''Special Features''' | ||
| + | * Digital-to-digital dubbing capability via one generation | ||
| + | * Automatic recording of recording date and time | ||
| + | * Three sampling frequencies selectable | ||
| + | * 48 kHz: For standard analog and digital input signals. | ||
| + | * 44.1 kHz: For CDs and recorded DAT tapes | ||
| + | * 32 kHz: For analog longplay input signals | ||
| + | * Longplay operation: up to four hours recording time with max. 120min tapes (recommendation) | ||
| + | |||
| + | * Visible tape run | ||
| + | |||
| + | * Various subcodes recordable: | ||
| + | * Start codes | ||
| + | * Program number codes | ||
| + | * Jump codes | ||
| + | * absolute time codes | ||
| + | |||
| + | * Digital on/off | ||
| + | * Subsequent change of sub-codes | ||
| + | * Excellent sound quality | ||
| + | * 1-bit A/D converter: For converting the analog input signals | ||
| + | * D/A pulse converter: For excellent playback quality | ||
| + | |||
| + | == Remarks == | ||
| + | * German version only with 2 head (no rear band control, no monitor switch in the right front area) and 4 D/D motor mechanics system, | ||
| + | * US/other area with 4 head and therefore rear band control (monitor switch in the right front area and 4 D/D motor mechanics system). | ||
| + | |||
| + | == Pictures == | ||
| + | |||
| + | == Test reports == | ||
== Links == | == Links == | ||
| − | [[ | + | [[Category:Sample Category 1]] |
| − | [[ | + | [[Category:Draft]] |
Latest revision as of 11:52, 29 July 2018
Short description[edit]
Space for a few introductory sentences about the device.
Data[edit]
General
- Manufacturer: Sony
- Model: DTC-2000 ES
- Years of manufacture: 1993-?
- Made in: Japan
- Color:champagne, black
- Dimensions: 470 x 135 x 380 mm (W x H x D)
- Weight: 12,5 kg
- Original price : 3.900.- DM (RRP)
Connections
- Number of inputs: 4
- Line In Cinch: 47 kOhm
- Digital In Cinch: 75 Ohm
- Digital In Opto 2x
- Number of outputs: 3
- Line Out Cinch: 470 Ohm
- Digital Out Cinch: 75 Ohm
- Headphones: 220 Ohm
Technical Data
- Sampling Frequency:
- 48 kHz
- 44.1 kHz
- 32 kHz
- Tape speed:
- Standard: 8.15 mm/s
- Longplay: 4.075 mm/s
- D/A converter: 1-bit D/A converter
- Frequency Response:
- Standard: 2 - 22000 Hz
- Longplay: 2 - 14500 Hz
- Dynamic range: over 94 dB
Signal to Noise Ratio: over 94 dB
- Distortion factor:
- Standard: Less than 0.0045%
- Longplay: Under 0.08
Special Features
- Digital-to-digital dubbing capability via one generation
- Automatic recording of recording date and time
- Three sampling frequencies selectable
- 48 kHz: For standard analog and digital input signals.
- 44.1 kHz: For CDs and recorded DAT tapes
- 32 kHz: For analog longplay input signals
- Longplay operation: up to four hours recording time with max. 120min tapes (recommendation)
- Visible tape run
- Various subcodes recordable:
- Start codes
- Program number codes
- Jump codes
- absolute time codes
- Digital on/off
- Subsequent change of sub-codes
- Excellent sound quality
- 1-bit A/D converter: For converting the analog input signals
- D/A pulse converter: For excellent playback quality
Remarks[edit]
- German version only with 2 head (no rear band control, no monitor switch in the right front area) and 4 D/D motor mechanics system,
- US/other area with 4 head and therefore rear band control (monitor switch in the right front area and 4 D/D motor mechanics system).