Difference between revisions of "Luxman L-507"
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Luxman]] |
− | * | + | * Model: Luxman L-507 |
− | * | + | * Type: Integrated amplifier |
− | * | + | * Years of manufacture: 1973 - 1975 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Front silver, wood veneer Rio rosewood |
− | * | + | * Remote control: No |
− | * | + | * Power consumption: 200 W max. 8 Ohm |
− | * | + | * Dimensions: 450 x 160 x 268 (WxDxH) |
− | * | + | * Weight: 11 kg |
− | * | + | * Original price: 1'548 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono 1: 2 | + | ** Phono 1: 2.4 mV, switchable 50 kOhm, 65 kOhm, 90 kOhm, max. 300 mV. |
− | ** Phono 2: 2 | + | ** Phono 2: 2.4 mV, 65 kOhm |
− | ** | + | ** Microphone: 2.4 mV, 65 kOhm |
− | ** Tuner: 120 mV | + | ** Tuner: 120 mV, 50 kOhm |
− | ** AUX 1: 120 mV | + | ** AUX 1: 120 mV, 50 kOhm |
− | ** AUX 2: 120 mV | + | ** AUX 2: 120 mV, 50 kOhm |
** Tape Play: 120 mV, 50 kOhm | ** Tape Play: 120 mV, 50 kOhm | ||
− | + | Tape Play DIN: 120 mV, 50 kOhm | |
− | * | + | ** Main In: 480 mV, 50 kOhm |
+ | * Number of outputs: | ||
** Tape Rec: 100 mV, 100 Ohm | ** Tape Rec: 100 mV, 100 Ohm | ||
− | + | Pre Out: 580 mV, 100 Ohm, max. 5 V | |
− | ** | + | ** Headphones: (jack 6.35 mm) |
− | ** 2 | + | ** 2 pairs of speakers |
− | ''' | + | '''Technical Data''' |
− | * | + | * Continuous power (at distortion factor) |
− | ** 8 Ohm: 2x 50 Watt - | + | ** 8 Ohm: 2x 50 Watt - distortion factor 0,1 % |
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.04 % |
− | * | + | * Attenuation factor: 40 at 8 Ohm |
− | * | + | * Frequency response: 10 - 50'000 Hz, ± 1 dB |
− | * | + | * Signal-to-noise ratio: |
− | ** | + | ** Phono: > 65 dB |
− | ** | + | ** Microphone: > 60 dB |
− | + | ** High level: > 80 dB | |
− | + | * Crosstalk attenuation: < 60 dB | |
− | ** | + | * Tone control: |
− | * | ||
− | * | ||
** Bass: ± 10 dB | ** Bass: ± 10 dB | ||
− | *** | + | *** Operating frequencies: 150 Hz / 300 Hz / 600 Hz |
− | + | Treble: ± 10 dB | |
− | *** | + | *** Application frequencies: 1.5 kHz / 3 kHz / 6 kHz |
− | * | + | * Filters: |
− | ** High Cut: | + | ** High Cut: 8 kHz, - 6 dB/octave |
− | + | ** Low Cut: 30 Hz, - 6 dB/octave | |
− | |||
− | ** Low Cut: | ||
− | |||
− | |||
* Low Boost 150 Hz: | * Low Boost 150 Hz: | ||
− | * Mute: | + | * Mute: No |
− | ''' | + | '''Special Features''' |
− | + | * Loudness switch | |
− | * Loudness | + | * Mono/Stereo selector |
− | * Mono/Stereo | + | * Speaker selector switch: Off/Main/Remote |
− | * | ||
− | == | + | == Notes == |
− | * | + | * Other models in the same series: |
− | * [[Luxman L- | + | * [[Luxman L-308]] |
− | * [[Luxman L- | + | * [[Luxman L-309]] |
− | * [[Luxman L- | + | * [[Luxman L-309 V]] |
− | + | * [[Luxman L-504]] | |
− | * [[Luxman L- | + | * [[Luxman L-505 V]] |
− | * [[Luxman L- | + | * [[Luxman L-507]] |
− | * [[Luxman L- | ||
− | * | + | == Pictures == |
− | + | * Extract from brochure: Luxman L-507 | |
+ | [[Datei:Luxman L-507-Prospekt-1.jpg]] | ||
− | == | + | == Reports == |
− | |||
− | |||
− | |||
− | |||
− | |||
Line 99: | Line 88: | ||
− | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 00:47, 29 May 2018
Data[edit]
General
- Manufacturer: Luxman
- Model: Luxman L-507
- Type: Integrated amplifier
- Years of manufacture: 1973 - 1975
- Made in: Japan
- Color: Front silver, wood veneer Rio rosewood
- Remote control: No
- Power consumption: 200 W max. 8 Ohm
- Dimensions: 450 x 160 x 268 (WxDxH)
- Weight: 11 kg
- Original price: 1'548 DM
Connections
- Number of inputs:
- Phono 1: 2.4 mV, switchable 50 kOhm, 65 kOhm, 90 kOhm, max. 300 mV.
- Phono 2: 2.4 mV, 65 kOhm
- Microphone: 2.4 mV, 65 kOhm
- Tuner: 120 mV, 50 kOhm
- AUX 1: 120 mV, 50 kOhm
- AUX 2: 120 mV, 50 kOhm
- Tape Play: 120 mV, 50 kOhm
Tape Play DIN: 120 mV, 50 kOhm
- Main In: 480 mV, 50 kOhm
- Number of outputs:
- Tape Rec: 100 mV, 100 Ohm
Pre Out: 580 mV, 100 Ohm, max. 5 V
- Headphones: (jack 6.35 mm)
- 2 pairs of speakers
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2x 50 Watt - distortion factor 0,1 %
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.04 %
- Attenuation factor: 40 at 8 Ohm
- Frequency response: 10 - 50'000 Hz, ± 1 dB
- Signal-to-noise ratio:
- Phono: > 65 dB
- Microphone: > 60 dB
- High level: > 80 dB
- Crosstalk attenuation: < 60 dB
- Tone control:
- Bass: ± 10 dB
- Operating frequencies: 150 Hz / 300 Hz / 600 Hz
- Bass: ± 10 dB
Treble: ± 10 dB
- Application frequencies: 1.5 kHz / 3 kHz / 6 kHz
- Filters:
- High Cut: 8 kHz, - 6 dB/octave
- Low Cut: 30 Hz, - 6 dB/octave
- Low Boost 150 Hz:
- Mute: No
Special Features
- Loudness switch
- Mono/Stereo selector
- Speaker selector switch: Off/Main/Remote
Notes[edit]
- Other models in the same series:
- Luxman L-308
- Luxman L-309
- Luxman L-309 V
- Luxman L-504
- Luxman L-505 V
- Luxman L-507
Pictures[edit]
- Extract from brochure: Luxman L-507
Datei:Luxman L-507-Prospekt-1.jpg