Difference between revisions of "Akai AA-1040"
(Die Seite wurde neu angelegt: „__NOTOC__ == Daten == {{Navigation}} '''Allgemein''' * Hersteller: Akai * Modell: AA-1050 * Baujahre: 1978 - 1979 * Hergestellt in: Japan * Farbe: schwarz,…“) |
|||
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Akai]] |
− | * | + | * Model: AA-1040 |
− | * | + | * Years of manufacture: 1976 - 1979 |
− | * | + | * Made in: Japan |
− | * | + | * Color: black, silver |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: |
− | * | + | * Dimensions: 480 x 155 x 390 mm (WxHxD). |
− | * | + | * Weight: 12.8 kg |
− | * | + | * Original price approx.: 998 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** | + | ** Phono: 3 mV / 47 kOhm |
− | + | 2x Tape In, Aux, DIN: 150 mV / 100 kOhm | |
− | ** | + | ** Antenna FM (75/300 Ohm) / MW. |
− | * | + | * Number of outputs: |
** Tape Out: 150 mV / 100 kOhm | ** Tape Out: 150 mV / 100 kOhm | ||
− | + | DIN: 30 mV / 180 kOhm | |
− | ** | + | ** Headphones (6.3 mm jack, front) |
− | ** | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (20-20,000 Hz) |
− | + | 8 Ohm: 2x 40 W | |
− | + | 4 Ohm: 2x 45 W | |
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: < 0.15% |
− | * | + | * Attenuation factor: |
− | * | + | * Frequency response: 7 - 70,000 Hz |
− | * | + | * Signal-to-noise ratio: (noise voltage aa.) |
− | + | Phono: 80 dB | |
− | + | Tape, Aux: 90 dB | |
− | * | + | * Stereo channel separation: |
− | * | + | * Tone control: |
− | ** Bass: ±10 dB | + | ** Bass: ±10 dB at 100 Hz |
− | + | Treble: ±10 dB at 10 kHz | |
− | * Loudness: +6/+10 dB ( | + | * Loudness: +6/+10 dB (treble/bass) |
− | * High Filter: -10 dB | + | * High Filter: -10 dB at 10 kHz |
− | * Low Filter (Subsonic): -8 dB | + | * Low Filter (Subsonic): -8 dB at 50 Hz |
* Mute: | * Mute: | ||
* Direct/Line-Straight: | * Direct/Line-Straight: | ||
Line 54: | Line 54: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 88 - 108 MHz |
− | ** MW: 520 - 1 | + | ** MW: 520 - 1,605 kHz |
− | * | + | * Frequency response: |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 1.1 µV |
− | + | MW: 180 µV / 8 µV (Ext.) | |
− | + | Distortion factor: | |
− | ** | + | ** FM: 0.15% (Mono), 0.3% (Stereo). |
− | + | Signal-to-noise ratio: | |
− | ** | + | ** FM: 75 dB |
− | + | MW: 50 dB | |
− | * | + | * Channel separation: 40 dB |
− | * | + | * Selectivity: |
− | * | + | * Common wave selection: |
− | ** | + | ** FM: 1 dB |
− | * | + | * Spurious wave selection: |
− | * | + | * Mirror frequency attenuation: |
− | ** | + | ** FM: 96 dB |
− | + | MW: 55 dB | |
− | + | IF attenuation: | |
− | ** | + | ** FM: 100 dB |
** MW: 45 dB | ** MW: 45 dB | ||
− | * AM | + | * AM suppression: 90 dB |
− | * | + | * Output level: |
− | * RDS: | + | * RDS: no |
− | * | + | * Station memory: no |
− | ''' | + | '''Special Features''' |
− | * | + | * FM muting adjustable |
− | |||
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
* [[Akai AA-1010]] | * [[Akai AA-1010]] | ||
* [[Akai AA-1010 L]] | * [[Akai AA-1010 L]] | ||
Line 103: | Line 102: | ||
− | == | + | == Pictures == |
− | * | + | * [[Image: Akai AA-1040 |
− | [[ | + | [[File:Akai AA-1040-1.jpg]] |
− | == | + | == Reviews == |
− | * | + | * Review by "Good Old Hifi": [[http://www.good-old-hifi.de/akai_aa-1050/]] |
== Links == | == Links == | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 10:04, 11 May 2018
Data[edit]
General
- Manufacturer: Akai
- Model: AA-1040
- Years of manufacture: 1976 - 1979
- Made in: Japan
- Color: black, silver
- Remote control: no
- Power consumption:
- Dimensions: 480 x 155 x 390 mm (WxHxD).
- Weight: 12.8 kg
- Original price approx.: 998 DM
Connections
- Number of inputs:
- Phono: 3 mV / 47 kOhm
2x Tape In, Aux, DIN: 150 mV / 100 kOhm
- Antenna FM (75/300 Ohm) / MW.
- Number of outputs:
- Tape Out: 150 mV / 100 kOhm
DIN: 30 mV / 180 kOhm
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (20-20,000 Hz)
8 Ohm: 2x 40 W 4 Ohm: 2x 45 W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: < 0.15%
- Attenuation factor:
- Frequency response: 7 - 70,000 Hz
- Signal-to-noise ratio: (noise voltage aa.)
Phono: 80 dB Tape, Aux: 90 dB
- Stereo channel separation:
- Tone control:
- Bass: ±10 dB at 100 Hz
Treble: ±10 dB at 10 kHz
- Loudness: +6/+10 dB (treble/bass)
- High Filter: -10 dB at 10 kHz
- Low Filter (Subsonic): -8 dB at 50 Hz
- Mute:
- Direct/Line-Straight:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 88 - 108 MHz
- MW: 520 - 1,605 kHz
- Frequency response:
- Input sensitivity:
- FM: 1.1 µV
MW: 180 µV / 8 µV (Ext.) Distortion factor:
- FM: 0.15% (Mono), 0.3% (Stereo).
Signal-to-noise ratio:
- FM: 75 dB
MW: 50 dB
- Channel separation: 40 dB
- Selectivity:
- Common wave selection:
- FM: 1 dB
- Spurious wave selection:
- Mirror frequency attenuation:
- FM: 96 dB
MW: 55 dB IF attenuation:
- FM: 100 dB
- MW: 45 dB
- AM suppression: 90 dB
- Output level:
- RDS: no
- Station memory: no
Special Features
- FM muting adjustable
Remarks[edit]
- Other models in the same series:
- Akai AA-1010
- Akai AA-1010 L
- Akai AA-1020
- Akai AA-1020 L
- Akai AA-1030
- Akai AA-1030 L
- Akai AA-1040
- Akai AA-1050
- Akai AA-1150
- Akai AA-1200
Pictures[edit]
- [[Image: Akai AA-1040
Reviews[edit]
- Review by "Good Old Hifi": [[1]]