Difference between revisions of "Luxman L-120A"
(11 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Luxman]] |
− | * | + | * Model: L-120 A |
− | * | + | * Model range: Duo-Beta Standard Series |
− | * | + | * Type: Integrated amplifier |
− | * | + | * Years of manufacture: 1980 - 1983 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Front Silver, Cabinet Black |
− | * | + | * Remote control: - |
− | * | + | * Power consumption: |
− | * | + | * Dimensions: 438 x 127 x 417 mm (WxHxD). |
− | * | + | * Weight: 14 kg |
− | * | + | * Original price approx.: 1'500 DM |
− | |||
+ | '''Connections''' | ||
+ | * Number of inputs: | ||
+ | ** Phono 1 MM: 2.0 mV, 47 kOhm, 100 kOhm, max. 160 mV (1 kHz). | ||
+ | ** Phono 1 MC: 0.12 mV, 100 Ohm | ||
+ | ** Phono 2 MC Direct: 0.12 mV, 100 Ohm | ||
+ | ** Tuner: 130 mV, 33 kOhm | ||
+ | ** AUX: 130 mV, 33 kOhm | ||
+ | ** Tape 1: 130 mV, 33 kOhm | ||
+ | Tape 2: 130 mV, 33 kOhm | ||
+ | ** Signal Processor / Main In: 1.6 V | ||
+ | * Number of outputs: | ||
+ | ** Tape Rec 1, 2: 300mV, max. 18 V | ||
+ | Signal Processor / Pre Out: 1.6 V, max. 18 V | ||
+ | ** Headphone output: | ||
+ | ** 2 speaker pairs | ||
− | + | '''Technical Data''' | |
− | + | * Continuous power (at distortion factor) | |
− | + | ** 8 Ohm: 2x 110 W (RMS, 20Hz - 20Khz, < 0.01 %) | |
− | + | ** 4 Ohm: 2x 160 W (DIN) | |
− | + | * Dynamic power | |
− | + | ** 8 Ohm: | |
− | + | ** 4 Ohm: | |
− | + | * Total harmonic distortion: 0.015 % | |
− | + | * Attenuation factor: 80 at 8 Ohm | |
− | + | * Frequency response: | |
− | + | ** Phono: 20 Hz - 20 kHz, ± 0.3 dB | |
+ | High Level: 20 Hz - 100 kHz, ± 1.0 dB | ||
+ | Distortion factor: < 0,02% | ||
+ | * Signalrauschabstand: | ||
+ | ** Phono: >92 dB | ||
+ | ** High Level: > 106 dB | ||
+ | * Tone control: | ||
+ | ** Bass: ± 9 dB at 100 Hz | ||
+ | *** Tilt frequencies: 150 Hz, 300 Hz, 600 Hz | ||
+ | ** High frequency: ± 9 dB at 10 kHz | ||
+ | *** Tilt frequencies: 1.5 kHz, 3 kHz, 6 kHz | ||
+ | * Subsonic filter: 6 dB / octave below 45 Hz | ||
+ | * Treble filter: 6 dB / octave above 7 kHz | ||
+ | * Loudness: ± 8 dB at 100Hz (Volume at -30dB) | ||
+ | * Muting: yes | ||
− | ''' | + | '''Special Features''' |
− | * | + | * MC / MM direct switch |
− | ** | + | * Power attenuator |
− | * | + | * Record selector |
− | + | * Tone by-pass switch | |
− | * | + | * Dubbing |
− | + | == Remarks == | |
− | + | * Integrated amplifiers of the same series: | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | == | ||
− | * | ||
** [[Luxman L-1]] | ** [[Luxman L-1]] | ||
** [[Luxman L-113A]] | ** [[Luxman L-113A]] | ||
Line 80: | Line 78: | ||
− | * | + | * Preamplifiers of the same series: |
** [[Luxman C-120A]] | ** [[Luxman C-120A]] | ||
** [[Luxman C-300]] | ** [[Luxman C-300]] | ||
− | * | + | * Power amplifiers of the same series: |
** [[Luxman M-120A]] | ** [[Luxman M-120A]] | ||
** [[Luxman M-300]] | ** [[Luxman M-300]] | ||
− | * | + | * Tuners of the same series: |
** [[Luxman T-1 L]] | ** [[Luxman T-1 L]] | ||
** [[Luxman T-112]] | ** [[Luxman T-112]] | ||
Line 96: | Line 94: | ||
− | * Tape | + | * Tape of the same series: |
** [[Luxman K-113]] | ** [[Luxman K-113]] | ||
** [[Luxman K-115]] | ** [[Luxman K-115]] | ||
Line 104: | Line 102: | ||
− | * | + | * Turntables of the same series: |
** [[Luxman PD-284]] | ** [[Luxman PD-284]] | ||
** [[Luxman PD-288]] | ** [[Luxman PD-288]] | ||
Line 114: | Line 112: | ||
− | * Equalizer | + | * [[Equalizer of the same series]] |
** [[Luxman G-120A]] | ** [[Luxman G-120A]] | ||
− | == | + | == Pictures == |
− | * | + | * Image: Luxman L-120 A |
− | [[ | + | [[File:Luxman L-120A-1.jpg]] |
− | |||
− | |||
− | |||
− | + | == Reports == | |
Line 132: | Line 127: | ||
− | [[ | + | [[Category:Integrated amplifier]]</0,02%> |
Latest revision as of 00:54, 17 April 2018
Data[edit]
General
- Manufacturer: Luxman
- Model: L-120 A
- Model range: Duo-Beta Standard Series
- Type: Integrated amplifier
- Years of manufacture: 1980 - 1983
- Made in: Japan
- Color: Front Silver, Cabinet Black
- Remote control: -
- Power consumption:
- Dimensions: 438 x 127 x 417 mm (WxHxD).
- Weight: 14 kg
- Original price approx.: 1'500 DM
Connections
- Number of inputs:
- Phono 1 MM: 2.0 mV, 47 kOhm, 100 kOhm, max. 160 mV (1 kHz).
- Phono 1 MC: 0.12 mV, 100 Ohm
- Phono 2 MC Direct: 0.12 mV, 100 Ohm
- Tuner: 130 mV, 33 kOhm
- AUX: 130 mV, 33 kOhm
- Tape 1: 130 mV, 33 kOhm
Tape 2: 130 mV, 33 kOhm
- Signal Processor / Main In: 1.6 V
- Number of outputs:
- Tape Rec 1, 2: 300mV, max. 18 V
Signal Processor / Pre Out: 1.6 V, max. 18 V
- Headphone output:
- 2 speaker pairs
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2x 110 W (RMS, 20Hz - 20Khz, < 0.01 %)
- 4 Ohm: 2x 160 W (DIN)
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.015 %
- Attenuation factor: 80 at 8 Ohm
- Frequency response:
- Phono: 20 Hz - 20 kHz, ± 0.3 dB
High Level: 20 Hz - 100 kHz, ± 1.0 dB Distortion factor: < 0,02%
- Signalrauschabstand:
- Phono: >92 dB
- High Level: > 106 dB
- Tone control:
- Bass: ± 9 dB at 100 Hz
- Tilt frequencies: 150 Hz, 300 Hz, 600 Hz
- High frequency: ± 9 dB at 10 kHz
- Tilt frequencies: 1.5 kHz, 3 kHz, 6 kHz
- Bass: ± 9 dB at 100 Hz
- Subsonic filter: 6 dB / octave below 45 Hz
- Treble filter: 6 dB / octave above 7 kHz
- Loudness: ± 8 dB at 100Hz (Volume at -30dB)
- Muting: yes
Special Features
- MC / MM direct switch
- Power attenuator
- Record selector
- Tone by-pass switch
- Dubbing
Remarks[edit]
- Integrated amplifiers of the same series:
- Preamplifiers of the same series:
- Power amplifiers of the same series:
- Tuners of the same series:
- Tape of the same series:
- Turntables of the same series:
Pictures[edit]
- Image: Luxman L-120 A
Reports[edit]
Links[edit]
</0,02%>