Difference between revisions of "Luxman L-505u"
(Die Seite wurde neu angelegt: „__NOTOC__ == Daten == {{Navigation}} '''Allgemein''' * Hersteller: Luxman * Modell: L-505u * Typ: Vollverstärker * Baujahre: 2007 - 2012 * Hergestellt in:…“) |
|||
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Luxman]] |
− | * | + | * Model: L-505u |
− | * | + | * Type: Integrated amplifier |
− | * | + | * Years of manufacture: 2007 - 2012 |
− | * | + | * Made in: Japan |
− | * | + | * Colour: front silver, cabinet cover grey |
− | * | + | * Remote control: yes, RA-9 |
− | * | + | * Power consumption: |
− | * | + | * Dimensions: 467 x 179 x 437 mm |
− | * | + | * Weight: 21 kg |
− | * | + | * New price approx.: 3'900 Euro |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
* Unbalanced: | * Unbalanced: | ||
− | ** Phono MM: 2 | + | ** Phono MM: 2.5 mV, 47 kOhm. |
** Phono MC: 0,3 mV, 100 Ohm | ** Phono MC: 0,3 mV, 100 Ohm | ||
** Line 1, 2, 3, 4: 180 mV, 42 kOhm | ** Line 1, 2, 3, 4: 180 mV, 42 kOhm | ||
** Main In: 1 V, 51 kOhm | ** Main In: 1 V, 51 kOhm | ||
− | + | Balanced: | |
** XLR CD: 180mV, 79kOhm | ** XLR CD: 180mV, 79kOhm | ||
** XLR Line: 180mV, 79kOhm | ** XLR Line: 180mV, 79kOhm | ||
− | * | + | * Number of Outputs: |
* Unbalanced: | * Unbalanced: | ||
** Tape Rec 1, 2: 180 mV | ** Tape Rec 1, 2: 180 mV | ||
− | + | Monitor 1, 2: 180 mV | |
− | + | Pre Out: 1 V | |
− | * 2 | + | * 2 pairs of speakers |
− | * | + | * Headphones |
− | ''' | + | '''Technical Data''' |
− | * | + | * Continuous power (at distortion factor) |
− | ** 8 Ohm: 2x | + | ** 8 Ohm: 2x 100 W |
− | + | 4 Ohm: 2x 140 W | |
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: |
− | ** 0 | + | ** 0.005% (1kHz / 8 Ohm) |
− | ** 0 | + | ** 0.03% (20Hz - 20 kHz, 8 Ohm) |
− | * | + | * Attenuation factor: |
− | * | + | * Frequency response: |
− | ** Phono MC: 20Hz - 20Khz (± 0 | + | ** Phono MC: 20Hz - 20Khz (± 0.5 dB). |
− | + | Phono MC: 20Hz - 20Khz (± 0.5 dB) | |
− | + | High Level: 20Hz - 100Khz (- 2 dB) | |
− | * | + | * Signal to noise ratio: 115dB |
− | * | + | * Frequency Response: |
− | ** 20Hz - 20'000 Hz, + 0 dB, - 0 | + | ** 20Hz - 20'000 Hz, + 0 dB, - 0.1 dB. |
− | * | + | * Distortion factor: <0.006% |
− | * | + | * Signal-to-noise ratio: |
** Phono MC: 75 dB | ** Phono MC: 75 dB | ||
** Phono MC: 91 dB | ** Phono MC: 91 dB | ||
− | + | High Level: 107 dB | |
− | * | + | * Stereo channel separation: |
− | * | + | * Tone control: switchable |
− | + | Bass: ± 10 dB at 100 Hz | |
− | + | Treble: ± 10 dB at 3 kHz | |
− | * Loudness: + 7 dB | + | * Loudness: + 7 dB at 100Hz, + 5 dB at 10kHz |
− | ''' | + | '''Special Features''' |
− | * 2 | + | * 2 large VU meters |
* Line Phase Sensor | * Line Phase Sensor | ||
* System Bus | * System Bus | ||
− | * Line Straight | + | * Line Straight circuit |
− | == | + | == Remarks == |
− | * | + | * Integrated amplifiers of the same series: |
** [[Luxman L-505u|L-505u]] | ** [[Luxman L-505u|L-505u]] | ||
** [[Luxman L-507u|L-507u]] | ** [[Luxman L-507u|L-507u]] | ||
Line 79: | Line 79: | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Luxman L-505u |
[[Datei:Luxman L-505u-Prospekt-1.jpg]] | [[Datei:Luxman L-505u-Prospekt-1.jpg]] | ||
− | == | + | == Reports == |
+ | * Review in "Hifi Test": [[https://www.hifitest.de/test/ausstattungsliste/vollverstaerker/luxman-l-505u_10706]] | ||
Line 90: | Line 91: | ||
− | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 04:16, 22 March 2018
Data[edit]
General
- Manufacturer: Luxman
- Model: L-505u
- Type: Integrated amplifier
- Years of manufacture: 2007 - 2012
- Made in: Japan
- Colour: front silver, cabinet cover grey
- Remote control: yes, RA-9
- Power consumption:
- Dimensions: 467 x 179 x 437 mm
- Weight: 21 kg
- New price approx.: 3'900 Euro
Connections
- Number of inputs:
- Unbalanced:
- Phono MM: 2.5 mV, 47 kOhm.
- Phono MC: 0,3 mV, 100 Ohm
- Line 1, 2, 3, 4: 180 mV, 42 kOhm
- Main In: 1 V, 51 kOhm
Balanced:
- XLR CD: 180mV, 79kOhm
- XLR Line: 180mV, 79kOhm
- Number of Outputs:
- Unbalanced:
- Tape Rec 1, 2: 180 mV
Monitor 1, 2: 180 mV Pre Out: 1 V
- 2 pairs of speakers
- Headphones
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2x 100 W
4 Ohm: 2x 140 W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion:
- 0.005% (1kHz / 8 Ohm)
- 0.03% (20Hz - 20 kHz, 8 Ohm)
- Attenuation factor:
- Frequency response:
- Phono MC: 20Hz - 20Khz (± 0.5 dB).
Phono MC: 20Hz - 20Khz (± 0.5 dB) High Level: 20Hz - 100Khz (- 2 dB)
- Signal to noise ratio: 115dB
- Frequency Response:
- 20Hz - 20'000 Hz, + 0 dB, - 0.1 dB.
- Distortion factor: <0.006%
- Signal-to-noise ratio:
- Phono MC: 75 dB
- Phono MC: 91 dB
High Level: 107 dB
- Stereo channel separation:
- Tone control: switchable
Bass: ± 10 dB at 100 Hz Treble: ± 10 dB at 3 kHz
- Loudness: + 7 dB at 100Hz, + 5 dB at 10kHz
Special Features
- 2 large VU meters
- Line Phase Sensor
- System Bus
- Line Straight circuit
Remarks[edit]
Pictures[edit]
- Extract from brochure: Luxman L-505u
Datei:Luxman L-505u-Prospekt-1.jpg
Reports[edit]
- Review in "Hifi Test": [[1]]