Difference between revisions of "Gold Ring G2200"
(→Bilder) |
Analoghatwas (talk | contribs) (Bemerkung ergänzt.) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | __NOTOC__ |
| − | {{ | + | == Data == |
| + | {{navigation}} | ||
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Goldring]] |
| − | * | + | * Model: 2200 |
| − | * | + | * Type: MM pickup |
| − | * | + | * Years of manufacture: 2008 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: black |
| − | * | + | * Weight: 7,2 g |
| − | * | + | * Original price approx.: 160 € |
| − | ''' | + | '''Technical data''' |
| − | * | + | * Frequency response: 10 - 20,000 Hz |
| − | * | + | * Channel separation: > 20 dB @ 1 kHz |
| − | * | + | * Channel balance: < 2.0 dB |
| − | * | + | * Output voltage: 6.5 mV (1 KHz/5 cm/s) |
| − | * | + | * Terminating resistor: 47 kOhm |
| − | * | + | * Inductance: 680 mH |
| − | * | + | * Needle type: elliptical (7x18 µm) |
| − | * vert. | + | * vert. scanning angle: 24 |
| − | * | + | * recommended contact force: 1.5 - 2.0 mN |
| − | * | + | * recommended cable inductance: 100-200 pF |
| − | * | + | * needle compliance: |
| − | * | + | * connection: 12.7 mm (1/2") |
| + | == Remarks == | ||
| + | Other models in the same series: | ||
| + | * [[Goldring G2100|G2100]] | ||
| − | == | + | * [[Goldring G2300|G2300]] |
| − | + | * [[Goldring G2400|G2400]] | |
| + | * [[Gold ring G2500|G2500]] | ||
| + | == Pictures == | ||
| + | [[Image:GR2200.jpg]] | ||
| − | == | + | == Reports == |
| − | |||
| − | |||
| − | |||
== Links == | == Links == | ||
| − | [[ | + | [[Category:Pickups]] |
Latest revision as of 13:41, 9 August 2016
Data[edit]
General
- Manufacturer: Goldring
- Model: 2200
- Type: MM pickup
- Years of manufacture: 2008
- Made in: Japan
- Color: black
- Weight: 7,2 g
- Original price approx.: 160 €
Technical data
- Frequency response: 10 - 20,000 Hz
- Channel separation: > 20 dB @ 1 kHz
- Channel balance: < 2.0 dB
- Output voltage: 6.5 mV (1 KHz/5 cm/s)
- Terminating resistor: 47 kOhm
- Inductance: 680 mH
- Needle type: elliptical (7x18 µm)
- vert. scanning angle: 24
- recommended contact force: 1.5 - 2.0 mN
- recommended cable inductance: 100-200 pF
- needle compliance:
- connection: 12.7 mm (1/2")
Remarks[edit]
Other models in the same series:
Pictures[edit]
