Difference between revisions of "Ortofon MC 30 Supreme"
m |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Ortofon]] |
| − | * | + | * Model: MC 30 Supreme |
| − | * | + | * Years of manufacture: |
| − | * | + | * Made in: Denmark |
| − | * | + | * Colour: bronze |
| − | * | + | * Weight: 10,5 g |
| − | * | + | * Original price approx.: 725,- € (as of: 2015) |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Principle: Moving Coil (MC) |
| − | * | + | * Frequency response: 20 - 40,000 Hz |
| − | * | + | * Channel separation: |
| − | * | + | * Channel balance: < 1 dB bei 1 kHz |
| − | * Übersprechdämpfung: | + | * Übersprechdämpfung: >27 dB at 1 kHz |
| − | * | + | * Output voltage: > 0.5 mV |
| − | * | + | * Terminating resistor: > 20 Ohm |
| − | * | + | * Needle type: Super Fine Line (r/R: 6/80 µm), naked on glass-fibre reinforced aluminium needle carrier |
| − | + | * Recommended contact force: 20 mN | |
| − | * | + | * Needle compliance: 16 µm/mN |
| − | * | + | * Scanning capability at 315 Hz: 80 µm |
| − | == | + | == Remarks == |
| − | == | + | == Pictures == |
| − | == | + | == Reports == |
== Links == | == Links == | ||
* [http://ortofon.com/hifi/products/historical-products/mc-supreme-series Ortofon MC Supreme Series] | * [http://ortofon.com/hifi/products/historical-products/mc-supreme-series Ortofon MC Supreme Series] | ||
| − | [[ | + | [[Category:Cartridges]]</1> |
Latest revision as of 12:28, 15 February 2016
Data[edit]
General
- Manufacturer: Ortofon
- Model: MC 30 Supreme
- Years of manufacture:
- Made in: Denmark
- Colour: bronze
- Weight: 10,5 g
- Original price approx.: 725,- € (as of: 2015)
Technical Data
- Principle: Moving Coil (MC)
- Frequency response: 20 - 40,000 Hz
- Channel separation:
- Channel balance: < 1 dB bei 1 kHz
- Übersprechdämpfung: >27 dB at 1 kHz
- Output voltage: > 0.5 mV
- Terminating resistor: > 20 Ohm
- Needle type: Super Fine Line (r/R: 6/80 µm), naked on glass-fibre reinforced aluminium needle carrier
- Recommended contact force: 20 mN
- Needle compliance: 16 µm/mN
- Scanning capability at 315 Hz: 80 µm