Editing Uher 4400 Report Monitor

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
== Data ==
+
== Daten ==
{{navigation}}
+
{{Navigation}}
'''General'''
+
'''Allgemein'''
* Manufacturer: [[Uher]]
+
* Hersteller: [[Uher]]
* Model: Uher 4400 Report Monitor
+
* Modell: Uher 4400 Report Monitor
* Type: Reel-to-reel tape
+
* Baujahre:
* Years of manufacture: 1979 - 1993
+
* Hergestellt in: München
* Manufactured in: Munich, Germany
+
* Farbe: Grausilber
* Color: grey silver
+
* Fernbedienung: optional
* Remote control: optional
+
* Leistungsaufnahme: ca. 3 W
* Power consumption: approx. 3 W
+
* Abmessungen: 28,5 cm x 9,5 cm x 22,7 cm
* Dimensions (WxHxD): 285 x 95 x 227 mm
+
* Gewicht: ca. 3,8 kg
* Weight: 3.8 kg
+
* Neupreis ca.:
* Original price approx.: 1'248 DM
 
  
 +
'''Anschlüsse'''
 +
* Anzahl der Ausgänge:
 +
** Radio:
 +
** Lautsprecher
 +
* Anzahl der Eingänge:
 +
** Mikrofon
 +
** Radio
 +
** Phono
  
'''Connections'''
 
* Number of inputs: 3
 
** Microphone: Contact assignment 3/5 and 2 (2 = ground) Pin 8: +5 V, input voltage range 0.1 mV - 40 mV (source resistance 200 Ohm), input resistance ---
 
** Radio: pin assignment 1/4 and 2 (2 = ground), input voltage range 1 mV - 400 mV, input resistance 10 kOhm
 
** Phono (high level): contact assignment 3/5 and 2 (2 = ground), input voltage range 50 mV - 20 V, input resistance 470kOhm
 
* Number of outputs: 4
 
** Radio: contact assignment 3/5 and 2 (2 = ground), output voltage 775 mV (0 dB), output resistance: 5.6 kOhm
 
Monitor: contact assignment 3/5 and 2 (2 = ground), output voltage 775 mV (0 dB), output resistance: 5.6 kOhm
 
** Headphone 1: contact assignment 6.3 mm coaxial socket, output voltage max. 2 V (at 7.8 V and RL -> infinite), output resistance: 33 Ohm
 
** Headphone 2: contact assignment 4/5 and 3/2 (3 = 2 = ground), output voltage max. 2 V (at 7.8 V and RL > 500 Ohm), output resistance: approx. 0.2 Ohm
 
  
 +
'''Technische Daten'''
 +
* max. Spulendurchmesser:
 +
* Spuren:
 +
* Bandgeschwindigkeiten:
 +
* Schlupf:
 +
* Gleichlaufschwankungen:
 +
* Tonhöhenschwankungen:
 +
* Gesamtfrequenzgang:
 +
* Ruhegeräuschspannungsabstand:
 +
* Fremdspannungsabstand:
 +
* Klirrfaktor:
 +
* Entzerrung:
 +
* Geräuschspannungsabstand:
 +
* Übersprechdämpfung:
 +
* Löschdämpfung:
 +
* Vormagnetisierungs- und Löschfrequenz:
  
'''Technical data'''
 
* Max. Coil diameter: 13 cm
 
* Tracks: quarter track according to DIN 45511 part 1
 
* Tone heads: 3
 
* Tape speeds: 2.4 cm/s; 4.75 cm/s; 9.5 cm/s; 19.05 cm/s
 
* Pitch fluctuations (synchronization): maximum +/- 0.14% at 19 cm/s, maximum +/- 0.2% at 9.5 cm/s
 
* Overall frequency response:
 
**at 2.4 cm/s: 25 Hz - 6 kHz.
 
at 4.75 cm/s: 25 Hz - 13 kHz
 
at 9.5 cm/s: 20 Hz - 16 kHz
 
at 19 cm/s: 20 Hz - 25 kHz
 
High-frequency response (measured on DIN reference empty tape) at 10 kHz:
 
**at 2.4 cm/s: ---
 
**at 4.75 cm/s: -11 dB
 
**at 9.5 cm/s: -9.5 dB
 
**at 19 cm/s: -5.5 dB
 
* Noise-to-voltage ratio (measured on DIN reference blank tape):
 
**at 2.4 cm/s: ---
 
**at 4.75 cm/s: 56 dB
 
**at 9.5 cm/s: 62 dB
 
**at 19 cm/s: 64 dB
 
* Distortion factor:
 
* Equalization:
 
* crosstalk attenuation (measured on DIN reference empty band) at 1 kHz: stereo >= 45 dB
 
* Cancellation attenuation (measured on DIN reference band) at 1 kHz: > 80 dB
 
* RF bias frequency: approx. 100 kHz
 
  
 +
'''Besondere Ausstattungen'''
 +
* hier, wenn vorhanden
  
'''Special Equipment'''
 
* Three-head machine with monitor circuit for backband control
 
Level control via illuminated peak voltage meters with automatic timer for illumination
 
* Display of the playback level at the level meters
 
* Light emitting diodes operating displays
 
* Battery control
 
* Electronic amplifier switching
 
* Power supply for condenser microphones from the unit via the microphone sockets
 
* Tape tension control
 
* 3-digit counter
 
* Control loudspeaker, can be switched off
 
* Remote start/stop, yellow LED indicates remote stop function
 
* Stable and resistant all-metal housing made of die-cast aluminium * Headstock made of die-cast aluminium
 
* Die-cast aluminium head mount
 
* Wide range of accessories
 
  
== Remarks ==
+
== Bemerkungen ==
* Other models of the same series:
+
Weitere Modelle der gleichen Serie:
*[[Uher_4000_Report_Monitor AV]]: mono unit half-track
 
*[[Uher_4200_Report_Monitor]]: Stereo device half-track
 
*[[Uher_4400_Report_Monitor]]: Stereo device quarter track
 
  
 +
== Bilder ==
  
== Pictures ==
+
== Berichte ==
*Extract from brochure: Uher Report Monitor 4000, 4200, 4400
 
[[File:Uher Report Monitor-4000-4200-4400-Prospekt-1.jpg]]
 
 
 
 
 
* Extract from brochure: Uher Report Monitor 4000, 4200, 4400 Accessories
 
[[File:Uher Report Monitor-4000-4200-4400-Prospekt-3.jpg]]
 
 
 
 
 
== Reports ==
 
* Report at "Uher Tape": [[http://uher-tonband.dl2jas.com/]]
 
 
 
  
 
== Links ==
 
== Links ==
  
[[Category:Tape machines]]
+
[[Kategorie:Bandmaschinen]]

Please note that all contributions to hifi-wiki.com may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see hifi-wiki.com:Copyrights for details). Do not submit copyrighted work without permission!

To edit this page, please answer the question that appears below (more info):

Cancel Editing help (opens in new window)

Template used on this page: