Latest revision |
Your text |
Line 1: |
Line 1: |
− | __NOTOC__
| + | Anfang 1978 stellte Toshiba eine ganze Baureihe neuer Receiver vor, der zweitgrösste war der SA-7100. |
− | == Data ==
| + | Das Designkonzept sieht den damaligen populären Pioneer Receivern nicht unähnlich. |
− | {{navigation}}
| + | Einzigartig ist aber die schöne Frontklappe welche gedämpft runterfährt. |
− | '''General'''
| + | Dieses Gerät hier hab ich auf Ebay-Kleinanzeigen für wenig Geld ergattert, Infos gibt es im Netz wenig, ausser auf Good Old Hifi. |
− | * Manufacturer: [[Toshiba]]
| + | Der SA-7100 ist ein analoger Receiver mit kräftiger Endstufe. |
− | * Model: SA-7100
| |
− | * Years of manufacture: 1978 - 1980
| |
− | * Made in: Japan
| |
− | * Color: Front silver (Europe version with steel cover, USA version with wooden case)
| |
− | * Remote control: no
| |
− | * Power consumption: 700 W
| |
− | * Dimensions: 520 x 190 x 460 mm (WxHxD)
| |
− | * Weight: 20 kg
| |
− | * Original price approx.: 670 US-$, 1'800 DM
| |
| | | |
| + | Technische Merkmale : |
| + | - 110 Watt RMS an 8 Ohm, 140 Watt an 4 Ohm, wahrscheinlich deutlich mehr ! |
| + | - 4 Transistoren pro Kanal |
| + | - 22000er Elkos |
| + | - 2 Netzteile, das schwarze nur für die Endstufe, das Kleine für Lampen, Klangregelung, Tuner, Phono, Vorverstärker. |
| + | - 2 Leistungsanzeigen |
| + | - gekapseltes Rastpoti für Lautstärke |
| + | - 220V 240 V Umschalter, bei 225 V Steckdosenspannung wird die Endstufe mit 54 VDC versorgt ( Stellung 220 V ) |
| + | Stellung 240 V : 50 VDC, das ist zu wenig, laut Service Manual sollen 54 VDC an den Elkos anliegen. |
| | | |
− | '''Connections'''
| + | Ausstattung: |
− | * Number of inputs:
| + | Anschlüsse: |
− | ** Phono 1 MM: 2.5 mV, 47 kOhm, 350 mV max.
| |
− | ** Phono 2 MM: 2,5 mV, switchable 47 kOhm, 100 kOhm, max. 350 mV
| |
− | ** Aux: 150 mV, 47 kOhm
| |
− | ** Tape Play 1, 2: 150 mV, 47 kOhm
| |
− | Tape Play DIN: 150 mV, 47 kOhm
| |
− | Dolby NR Adapter: 150 mV, 47 kOhm
| |
− | ** Antenna FM / MW: 75, 300 Ohm / 300 Ohm
| |
− | ** Main In: 1 V
| |
− | * Number of outputs:
| |
− | ** Tape Rec 1, 2: 150 mV
| |
− | Tape Rec DIN: 30 mV
| |
− | Dolby NR Adapter: 150 mV
| |
− | ** Pre Out: 1 V
| |
− | FM Det Out:
| |
− | ** Headphones (6.3mm jack)
| |
− | ** 3 pairs of loudspeakers
| |
| | | |
| + | - 2 x Phono, aber kein MC ! Für Phono 2 Impedanz schaltbar 47 KOhm und 100 KOhm. |
| + | - 2x Tape, AUX, Adaptor in out, Pre Out Pre in, Tape 2 auch als DIN Rundstecker. |
| + | - 75 Ohm und 300 Ohm Eingänge für UKW, MW, UKW DET. Buchse. |
| | | |
− | '''Technical Data'''
| + | Ausgänge : |
| + | - 3x Lautsprecher, es können aber nur max 2 paralel gehört werden. |
| + | - Phones |
| + | - Pre Out |
| + | - Adaptor Out |
| + | - Tape 1+2 Out. |
| | | |
− | ''Amplifier''
| + | Allgemein : |
− | * Continuous power (at distortion):
| |
− | ** 8 Ohm: 2x 110 W (RMS, 15 - 20'000 Hz, 0.08 %).
| |
− | ** 4 Ohm: 2x 140 W
| |
− | * Dynamic power:
| |
− | ** 8 Ohm:
| |
− | ** 4 Ohm:
| |
− | * Total harmonic distortion: < 0.08 %
| |
− | * Attenuation factor: 50 (at 8 Ohm)
| |
− | * Frequency response:
| |
− | ** Phono: 30 - 15'000 Hz, ± 0,2 dB
| |
− | ** High level: 10 - 35'000 Hz (+0,5 dB, -1 dB)
| |
− | * Signal-to-noise ratio:
| |
− | ** Phono: 80 dB
| |
− | ** High level: 95 dB
| |
− | * Tone control:
| |
− | ** Bass: ± 10 dB at 100 Hz
| |
− | *** Tilt frequencies: 200 Hz, 400 Hz
| |
− | Treble: ± 10 dB at 10 kHz
| |
− | *** Tilt frequencies: 2.5 kHz, 5 kHz
| |
− | * Loudness: + 8 dB at 100 Hz, + 4 dB at 10 kHz
| |
− | * Low Filter: - 6 dB / octave at 20 Hz
| |
− | * High Filter: - 6 dB / octave at 7 kHz
| |
− | * Mute: yes, - 10 dB, - 20 dB
| |
| | | |
− | | + | - Gewicht : etwa 20 KG |
− | ''Tuner''
| + | - B x H x T : |
− | * Reception: FM, MW
| |
− | * Frequencies:
| |
− | ** FM: 88 - 108 MHz
| |
− | ** MW: 525 - 1605 KHz
| |
− | * Input sensitivity:
| |
− | ** FM: 1.7µV
| |
− | ** MW: 300µV
| |
− | * Frequency response: 20 - 15'000 Hz, ± 0,5 dB
| |
− | * Distortion factor FM (1 kHz):
| |
− | ** Mono: < 0.08 %
| |
− | Stereo: < 0.1 %
| |
− | * Signal-to-noise ratio:
| |
− | ** FM mono: 75 dB
| |
− | FM stereo: 70 dB
| |
− | ** MW: 30 dB
| |
− | * Channel separation: 50 dB (1 kHz)
| |
− | * selectivity: 60 dB
| |
− | * Co-wave selection: 1.0 dB
| |
− | * Spurious wave selection: 80 dB
| |
− | * Mirror frequency attenuation:
| |
− | ** FM: 85 dB
| |
− | MW: 50 dB
| |
− | IF attenuation:
| |
− | ** FM: 100 dB
| |
− | ** MW: 40 dB
| |
− | * AM suppression: 55 dB
| |
− | | |
− | | |
− | '''Special Features'''
| |
− | * Tape dubbing
| |
− | * Separable pre-/power amplifier
| |
− | * NR adapter connectable
| |
− | * UKW Dolby preparation
| |
− | * Multipath display
| |
− | * FM High Blend Filter
| |
− | | |
− | | |
− | == Notes ==
| |
− | * In early 1978 Toshiba introduced a whole range of new receivers, the second largest being the SA-7100.
| |
− | * The design concept looks not dissimilar to the popular Pioneer receivers of the time.
| |
− | * Unique, however, is the beautiful front flap, which descends in a muted manner.
| |
− | * The SA-7100 is an analogue receiver with a powerful output stage. Fascinating are the feel of the buttons and switches. Everything is made of metal, switches click into place with momentum.
| |
− | The wonderfully powerful sound should also be mentioned. Especially with the Loudness button activated, basses of the deepest elemental force can be reproduced.
| |
− |
| |
− | | |
− | * Other models of the same series:
| |
− | * [[Toshiba SA-725]]
| |
− | * [[Toshiba SA-735]]
| |
− | * [[Toshiba SA-750]]
| |
− | * [[Toshiba SA-775]]
| |
− | * [[Toshiba SA-7100]]
| |
− | * [[Toshiba SA-7150]]
| |
− | | |
− | | |
− | == Pictures ==
| |
− | * Image: Toshiba SA-7100
| |
− | [[File:Toshiba SA-7100-1.jpg]]
| |
− | | |
− | | |
− | == Reviews ==
| |
− | * Review by "Good Old Hifi": [[http://www.good-old-hifi.de/toshiba_sa-7100__und__jvc_4vr-5414/]]
| |
− | | |
− | | |
− | == Links ==
| |
− | | |
− | | |
− | [[Category:Receiver]]
| |