| Latest revision |
Your text |
| Line 1: |
Line 1: |
| | __NOTOC__ | | __NOTOC__ |
| − | == Data == | + | == Daten == |
| − | {{navigation}} | + | {{Navigation}} |
| − | '''General''' | + | '''Allgemein''' |
| − | * Manufacturer: [[Technics]] | + | * Hersteller: Technics |
| − | * Model: SA-DX 930 | + | * Modell: SA DX930 |
| − | * Made in: Malaysia | + | * Baujahre: |
| − | * Color: Bronze / Champagne | + | * Hergestellt in: Malaysia |
| − | * Remote control: Yes (system remote control type EUR646497) | + | * Farbe: Bronce / Champagner |
| − | * Power Consumption: 240 W (2 W in standby mode) | + | * Fernbedienung: Ja |
| − | * Channels: 6 + Front B (Front A/B, Center, Surround, Subwoofer) | + | * Leistungsaufnahme: 240 W (2 W im Bereitschaftszustand) |
| − | * Sound formats: Mono, Stereo, Dolby Digital, Dolby Surround, DTS.
| + | * Abmessungen: 430x158x324,5 mm (BxHxT) |
| − | * Mains voltage: 230 V, 50 Hz
| + | * Gewicht: 9,7 kg |
| − | * Dimensions: 430x158x324.5 mm (WxHxD)
| + | * Neupreis ca.: |
| − | * Weight: 9.7 kg | |
| | | | |
| | | | |
| − | '''Connections''' | + | '''Anschlüsse''' |
| − | * Number of inputs: 11 (3x Video/ 6x Audio Analog/ 2x Audio Digital Optical) | + | * Anzahl der Eingänge: |
| − | Video TV: Maximum input voltage 1.5 Vp-p impedance 75 Ohm (unbalanced)
| + | ** hier die Eingänge aufzählen (mit Empfindlichkeit/Impedanz) |
| − | Video VCR: Maximum input voltage 1.5 Vp-p impedance 75 Ohm (unbalanced)
| + | * Anzahl der Ausgänge: |
| − | Video DVD: Maximum input voltage 1,5 Vp-p impedance 75 Ohm (unbalanced)
| + | ** hier die Ausgänge aufzählen (mit Pegel/Impedanz) |
| − | ** CD: Noise floor at rated power (6 ohms) 75 dB (IHF, A: 85 dB) / input sensitivity and impedance 200 mV/22 kOhm | |
| − | TAPE: Signal-to-noise ratio at rated power (6 ohms) 75 dB (IHF, A: 85 dB) / input sensitivity and impedance 200 mV/22 kOhm
| |
| − | DVD (6CH): Signal-to-noise ratio at rated power (6 ohms) 75 dB (IHF, A: 85 dB) / input sensitivity and impedance 200 mV/22 kOhm
| |
| − | TV: Signal-to-noise ratio at rated power (6 ohms) 75 dB (IHF, A: 85 dB) / input sensitivity and impedance 200 mV/22 kOhm
| |
| − | VCR: Signal-to-noise ratio at rated power (6 ohms) 75 dB (IHF, A: 85 dB) / input sensitivity and impedance 200 mV/22 kOhm
| |
| − | PHONO: Signal-to-noise ratio at rated power (6 ohms) 70 db (IHF, A: 80 dB) / input sensitivity and impedance 3 mV/47 kOhm
| |
| − | ** Digital Optical CD | |
| − | ** Digital Optical DVD
| |
| − | * Number of Outputs: 6 (2x Video/ 1x Headphone/ 1x Subwoofer/ 2x Audio Analog)
| |
| − | ** Video TV: Output voltage at 1 V input (unbalanced) 1 +- 0.1 Vp-p / Impedance 75 Ohm (unbalanced) | |
| − | Video VCR: Output voltage at 1 V input (unbalanced) 1 +- 0,1 Vp-p / impedance 75 Ohm (unbalanced)
| |
| − | ** Headphones: level/impedance 430 mV/330 Ohm
| |
| − | ** Subwoofer: Frequency response 7-100 HZ, +-3 dB
| |
| − | ** TAPE REC (OUT): Output voltage 200 mV
| |
| − | ** VCR OUT: Output voltage 200 mV
| |
| | | | |
| | | | |
| − | '''Technical Data''' | + | '''Technische Daten''' |
| | | | |
| − | * Output power DIN 1 kHz (total harmonic distortion 1%): 2 x 100 W (6 Ohm) | + | ''Audio/Video'' |
| − | * Continuous sound output power at 20 Hz-20 kHz both channels driven: 2 x 80 W (6 Ohm) | + | * Kanäle: |
| − | Total harmonic distortion at nominal power at 20 Hz-20 kHz: 0.05 % (6 Ohm)
| + | * TV-Norm: |
| − | Total harmonic distortion at half rated power at 1 kHz: 0.03 % (6 Ohm)
| + | * A/D-Wandler: |
| − | * Output power in Dolby Pro Logic DIN 1 kHz mode (distortion factor 1 %) Front speakers: 2x 100 W (6 Ohm) | + | * D/A-Wandler: |
| − | Output power in Dolby Pro Logic DIN 1 kHz mode (distortion factor 1 %) Centre speakers: 100 W (6 Ohm)
| + | * Ausgangsleistung (bei Klirrfaktor) |
| − | * Output power in Dolby Pro Logic DIN 1 kHz mode (distortion factor 1 %) Surround speakers: 2x 100 W (6 Ohm) | + | ** Stereo: |
| − | * Power bandwidth both channels driven at -3 dB: 10 Hz-40 kHz (6 Ohm) | + | ** Front: |
| − | * Damping factor: 30 (6 Ohm) | + | ** Center: |
| − | * Front A or B impedance: 4-16 ohms | + | ** Rear: |
| − | * Front A and B impedance: 8-16 ohms | + | ** Surround Back: |
| − | * Center speaker impedance: 6-16 ohms | + | * Dynamikleistung (bei Klirrfaktor) |
| − | * Surround speaker impedance: 6-16 ohms | + | ** Stereo: |
| − | * Frequency response PHONO: RIAA standard curve, (30 Hz-15 kHz) +-0.8 dB | + | ** Front: |
| − | * Frequency response CD, TAPE, DVD, TV, VCR: 10 Hz-40 kHz, +-0.3 dB | + | ** Center: |
| − | * Tone control Bass: 50 Hz, +10 to -10 dB | + | ** Rear: |
| − | * Tone control Treble: 20 kHz, +10 to -10 dB | + | ** Surround Back: |
| − | * Channel deviation (250 Hz-6.3 kHz): +-1 dB | + | * Gesamtklirrfaktor: |
| − | * Crosstalk attenuation: 55 dB | + | * Dämpfungsfaktor: |
| | + | * Frequenzgang: |
| | + | * Signalrauschabstand: |
| | + | * Stereokanaltrennung: |
| | + | * Klangregelung: |
| | + | ** Bass: |
| | + | ** Höhen: |
| | + | * Loudness: |
| | + | * High Filter: |
| | + | * Low Filter (Subsonic): |
| | + | * Mute: |
| | + | * Direct/Line-Straight: |
| | + | * Laufzeitkorrektur: |
| | + | * Bassmanagement: (einstellbare Übergangsfrequenz) |
| | + | * Verzögerungsanpassung (Lip Sync): |
| | + | * DSP-Programme: |
| | | | |
| | | | |
| | + | ''Tonformate'' |
| | + | * hier aufzählen |
| | | | |
| | | | |
| | + | ''Tuner'' |
| | + | * Empfang: (UKW/MW/LW/etc) |
| | + | * Frequenzen: |
| | + | ** UKW: |
| | + | ** etc.. |
| | + | * Frequenzgang: |
| | + | * Eingangsmpfindlichkeit: |
| | + | * Klirrfaktor: |
| | + | * Signalrauschabstand: |
| | + | * Kanaltrennung: |
| | + | * Trennschärfe: |
| | + | * Gleichwellenselektion: |
| | + | * Nebenwellenselektion: |
| | + | * Spiegelfrequenzdämpfung: |
| | + | * ZF-Dämpfung: |
| | + | * AM-Unterdrückung: |
| | + | * Ausgangspegel: |
| | + | * RDS: |
| | + | * Stationsspeicher: |
| | | | |
| − | ''Tuner''
| |
| − | * Reception: FM + MW
| |
| − | * Frequencies: FM 87.50-108.00 Mhz / MW 522-1611 kHz (9-kHz steps) 530-1620 kHz (10-kHz steps).
| |
| − | * Input sensitivity FM S/R 30 dB: 1.5 uV/75 Ohm
| |
| − | Input sensitivity VHF S/R 26 dB: 1.3 uV/75 Ohm
| |
| − | * Input sensitivity VHF S/R 20 dB: 1.2 uV/75 Ohm
| |
| − | useful sensitivity according to IHF (IHF '58): 1.5 uV/75 Ohm
| |
| − | Stereo switching threshold at 46 dB according to IHF: 22 uV/75 Ohm
| |
| − | * Total harmonic distortion mono: 0,2%
| |
| − | * Total harmonic distortion stereo: 0.3%
| |
| − | * Frequency response 20 HZ-15 kHz: +1 dB, -2 dB
| |
| − | * Selectivity VHF at interfering stations +-400 kHz: 65 dB
| |
| − | * Input ratio: 1.5 dB
| |
| − | * IF attenuation at 98 MHz: 40 dB
| |
| − | IF attenuation at 98 MHz: 70 dB
| |
| − | * Response attenuation on spurious frequencies at 98 MHz: 70 dB
| |
| − | * AM suppression: 50 dB
| |
| − | * Crosstalk attenuation at 1 kHz: 40 dB
| |
| − | * Carrier residual at 19 kHz: -30 dB (-35 dB according to IHF)
| |
| − | * Carrier residual at 38 kHz: -50 dB (-55 dB according to IHF)
| |
| − | * Channel deviation (250 Hz-6.3 kHz): +-1.5 dB
| |
| − | * Limiter insertion: 1.2 uV
| |
| − | * IF amplifier bandwidth: 180 kH
| |
| − | * Bandwidth FM demodulator: 1000 kHz
| |
| − | * Antenna terminal: 75 Ohm (unbalanced)
| |
| − | * Input sensitivity MW: 20 uV, 330 uV/m
| |
| − | * Selectivity MW (at 999 kHz): 55 dB
| |
| − | * IF attenuation MW (at 999 kHz): 50 dB
| |
| | | | |
| | + | '''Besondere Ausstattungen''' |
| | + | * Messmikrofon: |
| | + | * weitere aufzählen |
| | + | |
| | + | == Bemerkungen == |
| | + | Weitere Modelle der gleichen Serie: |
| | | | |
| − | == Pictures == | + | == Bilder == |
| − | [[Image:SA-DX930-Front.jpg]] | + | [[Bild:Technics SA DX930 front s.jpg|700px]] |
| − | [[Image:SA-DX930-Heck.jpg]] | + | [[Bild:Technics SA DX930 back s.jpg|700px]] |
| − | [[Image:SA-DX930-Zubehör.jpg]]
| |
| | | | |
| − | == Reports == | + | == Berichte == |
| | | | |
| | == Links == | | == Links == |
| | | | |
| − | [[Category:A/V Receivers]] | + | [[Kategorie:A/V-Receiver]] |