| Latest revision |
Your text |
| Line 1: |
Line 1: |
| − | __NOTOC__
| + | Sansui-Mittelklassemodell der frühen 80er Jahre (1981-84). Stellt zweimal 50 Watt Ausgangsleistung an 8 Ohm bereit. Dank Sansuis Super Feedforward System wenige Verzerrungen. Eingangsquelle per Drück-Schalter auszuwählen, LEDs zeigen die jeweils aktive Eingangsquelle an. In Großbritannien häufig im Set mit KEF Coda III-Lautsprechern verkauft. |
| − | == Data ==
| |
| − | {{navigation}}
| |
| − | '''General'''
| |
| − | * Manufacturer: [[Sansui]]
| |
| − | * Model: AU-D 33
| |
| − | * Type: Integrated amplifier
| |
| − | * Years of manufacture: 1981 - 1984
| |
| − | * Color: Black or silver
| |
| − | * Remote control:
| |
| − | * Power consumption: 210 watts
| |
| − | * Dimensions: 430 x 112 x 334 mm (WxHxD)
| |
| − | * Weight: 7.3 kg
| |
| − | * Original price approx.: 800 DM
| |
| | | | |
| | + | Die Maße des Sansui AU-D 33 liegen bei 430 x 112 x 334 mm, das Gewicht bei 7,3 kg. |
| | | | |
| − | '''Connections'''
| + | [Bild:http://hifi-wiki.de/images/f/fe/Sansui_au_d-33.jpg] |
| − | * Number of inputs: 5 (Cinch)
| |
| − | Phono
| |
| − | ** Tuner
| |
| − | Aux
| |
| − | 2x Tape
| |
| − | * Number of outputs: 2
| |
| − | ** Headphones (6,3mm jack)
| |
| − | ** (2 x loudspeaker)
| |
| | | | |
| − | | + | [[Kategorie:Vollverstärker]] |
| − | '''Technical data'''
| |
| − | * Sine power: 2 x 50 watts at 8 ohms
| |
| − | * Total harmonic distortion: 0.004% at RMS rated power
| |
| − | * cross distortion factor: 0,006%
| |
| − | * Power bandwidth: 0-300,000 Hz ±0dB, -3dB
| |
| − | * Attenuation factor: 40
| |
| − | * Input sensitivity
| |
| − | ** Phono MC: 250 uV / 100 Ohm
| |
| − | ** Phone MM: 2.5 mV / 47 kOhm
| |
| − | ** Tuner, AUX, Tape: 200 mV / 47 kOhm
| |
| − | ** Tape Rec.: 200 mV / 47 kOhm
| |
| − | * Output (level/impedance):
| |
| − | * Frequency response: 0-300,000 Hz ±0dB, -3dB.
| |
| − | * Tone control:
| |
| − | ** Bass: ± 10 dB / 50 Hz
| |
| − | Treble: ± 10 dB / 10 kHz
| |
| − | ** Selective tone control:
| |
| − | * Loudness: +8 dB / 100 Hz, +5dB / 10 kHz.
| |
| − | * Subsonic:
| |
| − | * Direct/Line-Straight: yes
| |
| − | * Ripple spacing (shorted):
| |
| − | * Stereo channel separation: 90 dB, Phono-MM 72 dB.
| |
| − | * Signal-to-noise ratio:
| |
| − | ** Phono-MC: 65 dB
| |
| − | ** Phono-MM: 84 dB
| |
| − | ** Rest: 105 dB
| |
| − | | |
| − | | |
| − | '''Special Features'''
| |
| − | * 2 switched outlets for further devices on the rear panel
| |
| − | | |
| − | | |
| − | == Remarks ==
| |
| − | * Sansui mid-range model of the early 1980s (1981-84). Provides two times 50 watts of output power into 8 ohms. Few distortions thanks to Sansui's Super Feedforward system. Input source selectable by push-switch, LEDs indicate active input source. In the UK often sold as a set with [[KEF Coda III]] speakers.
| |
| − | AU-D33 was one of the best amplifiers from Sansui and from the market in that period.
| |
| − | | |
| − | | |
| − | * Other models in the same series:
| |
| − | * [[Sansui AU-D 22]]
| |
| − | * [[Sansui AU-D 33]]
| |
| − | | |
| − | | |
| − | * Corresponding tuner:
| |
| − | * [[Sansui TU-S 33]]
| |
| − | | |
| − | | |
| − | == Pictures ==
| |
| − | * Extract from brochure: Sansui AU-D 22, AU-D 33, TU-S 33
| |
| − | [[File:Sansui AU-D-22-33-TU-S-33-Prospekt-1.jpg]]
| |
| − | | |
| − | | |
| − | == Reports ==
| |
| − | * Stereoplay 04/1982: "Top class IV", best integrated amplifier in the time at Stereoplay "Top class I".
| |
| − | | |
| − | | |
| − | == Links ==
| |
| − | | |
| − | | |
| − | [[Category:Integrated amplifier]] | |