Editing Myro Amur C

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
== Description ==
+
== Beschreibung ==
Model with pentagonal cabinet to avoid standing waves inside. Since this geometry is acoustically very advantageous over right angles, it was also used earlier in the [[Myro Concert Monitor]]. The drivers are from the Accuton [[Cell series]]; the tweeter is '''C'''eramic, hence the "C" designation. <br />
+
Fünfeckiges Gehäuse zur Vermeidung von stehenden Wellen im Inneren. Hochtöner aus den Accuton '''C'''eramic Chassis, daher die Bezeichnung "C". <br />
Finishes: Bamboo Natural, Bamboo Caramel, Bamboo Black. Lacquer finishes in high gloss or silk matt in the colour of your choice.  
+
Oberflächen-Ausführungen: Bambus Natur, Bambus Karamell, Bambus Schwarz. Lackierungen in Hochglanz oder Seidenmatt in Wunschfarbe.  
Chassis colour: white or grey
 
  
'''Concept'''<br />
+
'''Konzept'''<br />
*Type: Floorstanding loudspeaker
+
*Art: Standlautsprecher
*ways: 3
+
*Wege: 3
cabinet: closed
+
*Gehäuse: geschlossen
*Dimensions (H x W x D): 118,4 cm x 40,5 cm x depth: 38,5 cm
+
*Maße (H x B x T): 118,4 cm x 40,5 cm x Tiefe: 38,5 cm
Original price: 18800 Euro<br />
+
Neupreis: 18800 Euro<br />
  
'''Equipment'''<br />
+
Untere Grenzfrequenzen:<br />
tweeter: Accuton Cell C25-6-158 <br />
 
 
 
 
 
Lower cut-off frequencies:<br />
 
 
f (-0 dB) = 47 Hz<br />
 
f (-0 dB) = 47 Hz<br />
 
f (-3 dB) = 35 Hz<br />
 
f (-3 dB) = 35 Hz<br />
 
f (-6 dB) = 28 Hz
 
f (-6 dB) = 28 Hz
  
== Crossover ==
+
[http://www.weidlich-audio.de/amur-c.html Produktbeschreibung]
75 components are used in the entire crossover. Each loudspeaker is calibrated and thus receives its optimally tailored component values. The time required is considerable. The result is a "time-coherent sound transducer". Special effort is made to keep the interference with the signal as precise and as low as possible. For example, the sum of all four coils in front of the midrange driver is less than 0.18 mH with a total resistance of 0.17 ohms. The values used are custom made and all smaller than the smallest value available as standard in Mundorf's range of foil coils. The circuit of the midrange driver consists of twelve individual sections.
 
 
 
== Cabinet ==
 
The cabinet is ingeniously simple. The chamfers on the edges, together with the 108 degree internal angle of the sides, give almost the same characteristics as a very large rounded radius. Previous tests have shown that a radius of 10 cm gives excellent results. )nnen there are no parallel side surfaces. In addition, very effective foams are used for reflection insulation. An additional insulation measure counteracts standing waves in the inner height.<br />
 
The cabinet walls consist of a sandwich construction with 32 mm wall thickness plus approx. 1 mm paint thickness.
 
 
 
== Pictures ==
 
 
 
<gallery>
 
File:2341319742 g.jpg|Myro Amur C (high gloss white)
 
File:Amur.jpg|caramel
 
File:30409099.jpg|Perfection: the step response
 
</gallery>
 
  
== Additional information ==
 
  
[https://weidlich-audio.de/amur-serie-1.html product-description]
+
== Bilder ==
  
 
<''zurück: [[Myro Amur Serie]]''><br />
 
<''zurück: [[Myro Amur Serie]]''><br />
 
<''zurück: [[Myro Lautsprecher]]''><br />
 
<''zurück: [[Myro Lautsprecher]]''><br />
 
<''zurück: [[Myro]]''>
 
<''zurück: [[Myro]]''>

Please note that all contributions to hifi-wiki.com may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see hifi-wiki.com:Copyrights for details). Do not submit copyrighted work without permission!

To edit this page, please answer the question that appears below (more info):

Cancel Editing help (opens in new window)