Editing Luxman C-5000A

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
−
== Data ==
+
'''ACHTUNG: Seite ist im Aufbau!!!'''
−
'''General'''
+
== Daten ==
−
* Manufacturer: [[Luxman]]
+
'''Allgemein'''
−
* Model: C-5000A
+
* Hersteller: [[Luxman]]
−
* Model range: Prestige Series
+
* Modell: C-5000A
−
* Type: Duo-Beta Stereo Preamplifier
+
* Baujahre: 1979 - 1981
−
* Years of manufacture: 1979 - 1981
+
* Hergestellt in: Japan
−
* Made in: Japan
+
* Farbe: Silber, Holz
−
* Color: Silver, Wood
+
* Typ: Duo-Beta Stereo Vorstufe
−
* Remote control: -
+
* Fernbedienung: -
−
* Power consumption: 30 W
+
* Leistungsaufnahme: 30 W
−
* Dimensions (WxHxD): 498 mm x 180mm x 350mm
+
* Abmessungen (BxHxT): 498 mm x 350mm x 180mm
−
* Weight: 11.5 kg  
+
* Gewicht: 11,5 kg  
−
* Original price approx.: 355'000 Yen (Japan, 1979), 1'400 US-$, 5'000 DM
+
* Neupreis ca.: 355'000 Yen (Japan, 1979), 1400 US-$, 4200 DM
  
 +
'''Anschlüsse'''
 +
* Anzahl der Eingänge:
 +
** Phono MM 1
 +
** MM 2
 +
** MC
 +
** Tuner
 +
** Aux 1
 +
** Aux 2
 +
** Tape 1
 +
** Tape 2
 +
** Tape 3
 +
* Anzahl der Ausgänge:
 +
** Pre Out
 +
** Tape 1 Rec Out 
 +
** Tape 2 Rec Out 
 +
** Tape 3 Rec Out 
  
−
'''Connections'''
 
−
* Number of inputs:
 
−
** Phono MM 1: 2.2 mV, 50 kOhm.
 
−
** Phono MM 2: 2.2 mV, switchable 100 Ohm, 50 kOhm, 100kohm; 50pf, 100pf, 300pf
 
−
Phono MC: 220 mV, 20 - 40 Ohm
 
−
** Tuner: 145 mV, 60 kOhm
 
−
** Aux 1: 145 mV, 60 kOhm
 
−
** Aux 2: 145 mV, 60 kOhm
 
−
** Tape 1: 145 mV, 60 kOhm
 
−
** Tape 2: 145 mV, 60 kOhm
 
−
** Tape 3: 145 mV, 60 kOhm
 
−
* Number of outputs:
 
−
** Pre Out 1 & 2: typical 1V, max 18V, <0.002%, 47 ohms.
 
−
** Headphone switchable: off, low, high
 
−
** Tape 1 Rec Out: typically 145mV, max. 18V, <0.002%, 100 Ohm
 
−
** Tape 2 Rec Out: typically 145mV, max. 18V, <0.002%, 100 Ohm
 
−
** Tape 3 Rec Out: typically 145mV, max. 18V, <0.002%, 100 Ohm
 
  
 +
(20Hz - 20kHz) 
 +
Phono MM 1 & 2, MC: <0.005% (Rec Out: 145mV) : Direct in: 600mV, 50 kOhmTuner, AUX1, 2:0.005% or less (Pre Out:1V)
 +
Monitor1, 2, 3:0.005% or less (Pre Out:1V) 
 +
Cross modulation distortion
 +
(60Hz:7kHz=4:1)  Phono man month1, 2, MC: 0.002% or less (Rec Out: 145mV)
 +
Tuner, AUX1, 2:0.002% or less (Pre Out:1V)
 +
Monitor1, 2, 3:0.002% or less (Pre Out:1V) 
 +
Frequency characteristic  Phono: 20Hz-20kHz±0.2dB
 +
Tuner, AUX: 1Hz - -150kHz 0.5dB
 +
Monitor: 1Hz - -150kHz 0.5dB 
 +
Input sensitivity
 +
(Pre Out:1V)  Phono MC: 220 microvolts (at the time of LUX transformer 8020 using)
 +
Phono man month1, 2:2.2 mV
 +
Tuner, AUX1, 2:145mV
 +
Monitor1, 2 or 3:145mV 
 +
Input impedance  Phono MC: 20ohms - 40ohms (at the time of LUX transformer 8020 using)
 +
Phono man month1:50kohm
 +
Phono man month2:100ohm, 50kohm, 100kohm
 +
Tuner, AUX1, 2:60kohm
 +
Monitor1, 2, 3:60kohm 
 +
SN ratio (IHF-A)
 +
Input short-circuit  Phono MC: 78dB (at the time of LUX transformer 8020 using)
 +
Phono man month1, 2:80dB
 +
Tuner, AUX1, 2:100dB
 +
Monitor1, 2 or 3:100dB 
 +
Tone control  With a curving [ LUX scheme NF type ] point frequency switching (an it1 is possible)
 +
The point curving [ low-pass ]: 55Hz, 77Hz, 110Hz, 155Hz, 220Hz, 310Hz, 440Hz, 620Hz, 880Hz
 +
The point curving [ high region ]: 440Hz, 620Hz, 880Hz, 1.2kHz, 1.7kHz, 2.5kHz, 3.5kHz, 5kHz, 6kHz
 +
Variation: -8dB, -4dB, -2dB, -1dB, 0dB, 1dB, 2dB, 4dB, 8dB 
 +
Subsonic Filter  6 dB/oct, 10 Hz/off/20Hz
 +
12 dB/oct, 10 Hz/off/20Hz
 +
It is both the filters on and they are 18dB / oct. 
 +
A high cut-off filter  6 dB/oct, 9 kHz/off/15kHz
 +
12 dB/oct, 9 kHz/off/15kHz
 +
It is both the filters on and they are 18dB / oct. 
 +
Attachment  man-month-2 capacitance switching (50pF, 100pF, 300pF)
 +
Three tapes monitors
 +
Tapes dubbing
 +
Low boost switchpoint (50 Hz/off/100Hz) 
  
−
'''Specifications'''  
+
'''Technische Daten'''
−
* Frequency response: 20Hz - 20'000 Hz
+
* Ausgangsspannung:
−
Phono: 20Hz - 20'000 Hz, ±0.2dB
+
** Pre Out: Max. 1V, <0.002%, 47 Ohm
−
Tuner, AUX: 1Hz - 150'000 Hz, 0.5dB
+
** Rec Out: Standard 145mV, max. 18v <0.002%, 100ohms 
−
** Monitor: 1Hz - 150'000 Hz, 0.5dB   
+
*Lastimpedanz: 47ohms
−
Distortion factor:
+
*Frequenzcharakteristik: PHONO1, PHONO2: 20Hz-20kHz (weniger als ± 0,2 dB)DAD, monitor1, monitor2: 1Hz-50kHz
−
** Phono MM 1 &amp; 2, MC: &lt;0.005%.
+
*Eingangsempfindlichkeit (output 1V): PHONO: Mann month2mV, MC100microvolt
−
** Tuner, AUX1, 2: 0.005%
+
*Eingangsimpedanz: PHONO1, PHONO2: 50kOhm, 100kOhm
−
** Monitor Tape 1, 2, 3: 0.005%
+
*SN-Verhältnis (IHF-A-Korrektur): PHONO1 und mehr als PHONO2: 90dB DAD, TUNER, LINE: 110 dB oder mehr
−
Signal to Noise Ratio:
+
*Attachment: einer Linie / Phase / Sensor Andere
−
** Phono MM 1 &amp; 2: 80dB
 
−
** Phono MC: 78dB
 
−
** Tuner, AUX 1 &amp; 2: 100dB
 
−
** Monitor 1, 2 &amp; 3: 100dB 
 
−
* Stereo Channel Separation:
 
−
* Tone Control:
 
−
** Bass: ± 8dB
 
−
Treble: ± 8dB
 
−
* Loudness: -
 
−
* High Filter, switchable: 6 dB / octave, 9 kHz/off/15kHz, 12 dB / octave, 9 kHz/off/15kHz
 
−
* Low Filter (Subsonic) switchable: 6 dB / octave, 10 Hz/off/20Hz; 12 dB / octave, 10 Hz/off/20Hz;
 
−
* Low boost switchable: 50 Hz/off/100Hz
 
  
  
−
'''Special Features'''
+
'''Besondere Ausstattungen'''
−
* Preamplifier construction completely 2xMono
+
* Vorverstärker Aufbau komplett 2xMono
−
* Sound bypass
 
−
* Stereo / Mono switchable: Mono L+R, Mono L, Mono R, Stereo, Reverse
 
−
* Operating frequencies Low, switchable: 55Hz, 77Hz, 110Hz, 155Hz, 220Hz, 310Hz, 440Hz, 620Hz, 880Hz
 
−
* Operating frequencies High, switchable: 440Hz, 620Hz, 880Hz, 1.2kHz, 1.7kHz, 2.5kHz, 3.5kHz, 5kHz, 7kHz
 
−
* Variation possibilities: -8dB, -4dB, -2dB, -1dB, 0dB, 1dB, 2dB, 4dB, 8dB.
 
−
* Tape Dubbing Tape 1 switchable: Tape 2, Source, Rec off
 
−
* Tape Dubbing Tape 2 switchable: Tape 1, Source, Rec off
 
−
* Tape Dubbing Tape 3 switchable: Tape 1, Source, Rec off
 
−
* Slot for phono step-up transformer on the rear panel
 
  
  
−
== Remarks ==
+
== Bemerkungen ==
−
* Other models of the same series:
+
* Weitere Modelle der gleichen Serie:
−
** Corresponding power amplifier Luxman M-4000A.
+
** Korrespondierende Endstufe Luxman M-4000A
 
*** [[Luxman M-4000A|M-4000A]]
 
*** [[Luxman M-4000A|M-4000A]]
  
  
−
== Pictures ==
+
== Bilder ==
−
* Luxman C-5000A front
+
* Luxman C-05 Front
−
[[File:Luxman C-5000a-1.jpg]]
+
[[Datei:Luxman C-05-6.jpg]]
  
−
* Luxman C-5000A Tone Control
 
−
[[File:Luxman C-5000-3.jpg]]
 
  
 +
== Berichte ==
 +
* Externer Link: Bericht Restauration C-5000A "Liquid Audio": [http://liquidaudio.com.au/luxman-c-5000a-preamplifier-repair-restoration/]
  
−
== Reports ==
 
−
* External link: [[Report Restoration C-5000A "Liquid Audio"]] [http://liquidaudio.com.au/luxman-c-5000a-preamplifier-repair-restoration/]
 
  
 +
== Links ==
 +
* Externer Link: Webseite "Wegavision Pytalhost": [http://wegavision.pytalhost.com/Luxman/1981/Luxman_81-82_05.jpg]
 +
 +
* Externer Link: Webseite "The Vintage Knob": [http://www.thevintageknob.org/luxman-C-5000A.html]
 +
 +
* Externer Link: Webseite "Hifido, Japan": [http://www.hifido.co.jp/KWC-5000A/G1/E/10-10/C11-58695-00988-00/]
 +
 +
* Externer Link: Webseite "Audio Database": [http://audio-database.com/LUXMANALPINE-LUXMAN/amp/c-5000a-e.html]
 +
 +
* Externer Link: Webseite "Audio Heritage, Japan": [http://audio-heritage.jp/LUXMAN/amp/c-5000a.html]
 +
 +
[[Kategorie:Vorverstärker]]
 +
 +
 +
 +
 +
'''Technische Daten'''
 +
* Dauerleistung (bei Klirrfaktor)
 +
** 8 Ohm: 2 x 180W (20Hz...20Khz, 0,008% THD)
 +
** 4 Ohm: 2 x 250W DIN
 +
* Dynamikleistung
 +
** 8 Ohm:
 +
** 4 Ohm:
 +
* Gesamtklirrfaktor: < 0,005%
 +
* Dämpfungsfaktor: 100 bei 8 Ohm
 +
* Frequenzgang: 3 - 100'000 Hz
 +
* Signalrauschabstand: >116 dB
 +
* Stereokanaltrennung: >100 dB
 +
* Geräuschspannung: >115 dB
 +
* Übertragungsbereich: 10-100.000 Hz +0/-0,5 dB
 +
* Subsonic Filter: ja
  
−
== Links ==
 
−
* External Link: "Hifi Archive" website: [http://www.hifi-archiv.info/Luxman/1981/Luxman_81-82_05.jpg]
 
  
−
* External Link: "The Vintage Knob" website: [http://www.thevintageknob.org/luxman-C-5000A.html]
+
'''Besondere Ausstattungen'''
 +
* Separate Pegelregler L / R
 +
* Stand-by Anzeige
 +
* Grosse VU-Meter mit Peak-Hold Taste und VU-Meter Umschaltung -20dB
 +
* Subsonic Taste auf der Rückseite
 +
 
 +
 
 +
== Bemerkungen ==
 +
* Gegenüber der Luxman M-4000 weist die M-4000A folgende Änderungen auf:
 +
** MOS-FETs, Lux's Duo-Beta Schema, XLR Stecker für die Lautsprecher, einen verbesserten Signalrauschabstand von 2dB, Duo-Beta Logo und 2 Kilos mehr Gewicht. Zudem wurden die VU-Meter überarbeitet (schmaler und klarer).
 +
 
  
−
* External link: "Hifido, Japan" website: [http://www.hifido.co.jp/KWC-5000A/G1/E/10-10/C11-58695-00988-00/]
 
  
−
* External link: "Audio Database" website: [http://audio-database.com/LUXMANALPINE-LUXMAN/amp/c-5000a-e.html]
+
== Bilder ==
 +
* Luxman M-4000A Front
 +
[[Datei:Luxman M-4000A-6.jpg]]
  
−
* External link: "Audio Heritage, Japan" website: [http://audio-heritage.jp/LUXMAN/amp/c-5000a.html]
+
* Luxman M-4000 Innenansicht
 +
[[Datei:Luxman M-4000A-8.jpg]]
  
−
[[Category:Preamplifier]]
+
* Luxman M-4000A Rückansicht
 +
[[Datei:Luxman M-4000A-10.jpg]]

Please note that all contributions to hifi-wiki.com may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see hifi-wiki.com:Copyrights for details). Do not submit copyrighted work without permission!

To edit this page, please answer the question that appears below (more info):

Cancel Editing help (opens in new window)
Retrieved from "https://hifi-wiki.com/index.php/Luxman_C-5000A"