Latest revision |
Your text |
Line 1: |
Line 1: |
− | __NOTOC__
| + | {{nicht vorlagenkonform}} |
− | == Data ==
| + | *Sinusleistung 4 Ohm, 1kHz (DIN) 2 x 220 Watt |
− | {{navigation}} | + | *8 Ohm. 63Hz-12,5 kHz 0,7 % Gesamtklirrfaktor(IEC) |
− | '''General'''
| + | *Nennleistung (FTC) 2 x 220 Watt, min. effektiv an 8 Ohm, beide Kanäle -ausgesteuert von 20 Hz - 20 kHz, bei höchstens 0,004 % Gesamtklirrfaktor |
− | * Manufacturer: [[Kenwood]] | + | *Gesamtklirrfaktor AUX an SPEAKER 0.004% (bei Nennleistung an 8 Ohm) |
− | * Model: Basic M 2 A
| + | *Intermodulationsverzerrungen 0.004% (bei Nennleistung an ( 8 Ohm) |
− | * Type: Stereo power amplifier
| + | *Frequenzgang (-3dB) DC - 300kHz |
− | * Years of manufacture: 1987 - 1990
| + | *Dämpfungsfaktor an 8 Ohm 1000 (50Hz) |
− | * Manufactured in:
| + | *Anstiegszeit 1,6y Sek. |
− | * Color: Black
| + | *Eingangsempfindlichkeit/ -impedanz 1V/47k Ohm |
− | * Remote control: no
| + | *Geräuschspannungsabstand (IHF-A), (=)unbewertet, 120 dB (70dB) |
− | * Power consumption: 500 W
| + | *Leistungsaufnahme 500 Watt, |
− | * Dimensions: 440 x 158 x 373 mm (WxHxD)
| + | *Abmessungen (BxHxT,mm) 440x158x373 |
− | * Weight: 15.5 kg
| + | *Gewicht (netto) 15,5 kg |
− | * Original price approx.: 1'500 DM
| |
− | | |
− | | |
− | '''Connections'''
| |
− | * Number of inputs:
| |
− | ** 1 x Line In
| |
− | * Number of outputs:
| |
− | ** 2 x loudspeaker
| |
− | | |
− | | |
− | '''Technical Data'''
| |
− | * Rated power
| |
− | ** 8 Ohm: 2x 220 W RMS (20Hz - 20kHz, at 0.004% THD)
| |
− | * Continuous power (at THD) | |
− | ** 8 Ohm: 2x 230 W (at 0.7% THD, 63Hz - 12.5kHz, according to IEC/NF standard; at 1% THD, 1kHz, according to DIN standard)
| |
− | 4 Ohm: 2x 250 W (at 1% THD, 1kHz, according to DIN standard)
| |
− | * Dynamic power
| |
− | ** 8 Ohm: 2x 346 W
| |
− | 4 Ohm: 2x 526 W
| |
− | Total harmonic distortion:
| |
− | ** 0.004% at nominal power (20Hz - 20kHz, 8 Ohm). | |
− | ** 0.001% at nominal power (1kHz, 8 Ohm) | |
− | * Intermodulation distortion | |
− | ** 0.004% at nominal power (60Hz:7kHz = 4:1, 8 Ohm) | |
− | * Attenuation factor: 1.000 (50Hz, 8 Ohm)
| |
− | * Rise time 1.6 µSec. | |
− | * Input (sensitivity/impedance): | |
− | ** 1V/47kOhm
| |
− | * Frequency response: 0 - 300 kHz (+0, -3dB) | |
− | * Signal-to-noise ratio:
| |
− | ** 120dB (according to IHF-66).
| |
− | 70dB (according to IEC/NF)
| |
− | * Stereo channel separation: 70dB (according to IEC/NF)
| |
− | | |
− | | |
− | '''Special Features'''
| |
− | * Channel-separated level control | |
− | * Power meter with peak hold (can be switched off and switched 1/3 sec.) | |
− | * Headphone jack | |
− | | |
− | == Note ==
| |
− | * Other models in the series:
| |
− | * Kenwood preamplifier:
| |
− | * [[Kenwood Basic C 1]]
| |
− | * [[Kenwood Basic C 2]]
| |
− | | |
− | | |
− | * Kenwood power amplifiers:
| |
− | * [[Kenwood Basic M 1]]
| |
− | * [[Kenwood Basic M 1 A]]
| |
− | * [[Kenwood Basic M 2]]
| |
− | * [[Kenwood Basic M 2 A]]
| |
− | | |
− | | |
− | * [[Kenwood Corresponding Tuners:
| |
− | * [[Kenwood BASIC T 1]]
| |
− | * [[Kenwood BASIC T 2]]
| |
− | | |
− | | |
− | * [[Corresponding Kenwood Tape Deck:
| |
− | * [[Kenwood BASIC X 1]]
| |
− | | |
− | | |
− | == Pictures ==
| |
− | * Picture: Kenwood Basic M 2 A front view
| |
− | [[Image:Kenwood M2a Front.jpg]]
| |
− | | |
− | | |
− | * Picture: Kenwood Basic M 2 A Display
| |
− | [[Image:M2A_front_Display.jpg]]
| |
− | | |
− | | |
− | * Picture: Kenwood Basic M 2 A Rear (US Model)
| |
− | [[Image:M2A Rear.jpg]]
| |
− | | |
− | | |
− | == Reports ==
| |
− | * Report by "Mackers": [[http://www.mackern.de/index.php/2013/02/16/kenwood-m2a/]
| |
− | | |
− | | |
− | [[File:Kenwood KA-3-5-7 X-36-Daten-1987.jpg]]
| |
− | | |
− | | |
− | == Links ==
| |
− | | |
− | | |
− | [[Category:Power Amplifiers]]
| |