Editing Elac ESG-796 H SP

'''General''':

Type:  moving magnet<br />

Date of manufacturing: ca. 1986
<br />
Price: first 500 DM, later  "Jubilee" 300 DM.<br />

'''Technical Data''':

Output Voltage
5,6mV

Frequency Response
10Hz - 30kHz 	

Tracking Force
1-1.25g 	

Mass
6.5g

Channel Separation
> 28db 	

Channel Balance
< 1db 	

Load Impedance
47k ohms 	

Output Impedance
	
Stylus
diamond pur

Stylus Tip
VdH (van d`Hul) I 	

Cantilever
boron 	

Dynamic Compliance
30x10-6cm/Dyne
==Testberichte==
Stereoplay

==Link==
* [http://www.hifimuseum.de/elac-esg796-hsp-h30.html Informationen über das Elac 796 HSp bei hifimuseum.de]<br />



[[Kategorie:Tonabnehmer]]
@@ Line 1: / Line 1: @@
-__NOTOC__
+'''General''':
-== Data ==
-{{navigation}}
-'''General'''
-* Manufacturer: [[Elac]], Kiel, Germany
-* Model: ESG 796 H SP + H SP "Anniversary".
-* Years of manufacture: 1986 - 1990
-* Manufactured in: Germany
-* Colour: gold/black
-* Weight: 6,5 g
-* Original price: UVP 500 DM, anniversary model 300 DM
+Type:  moving magnet<br />
-'''Technical data'''
+Date of manufacturing: ca. 1986
-* Principle: MM
+<br />
-* Frequency response: 10 - 30,000 Hz (+- 1db)
+Price: first 500 DM, later  "Jubilee" 300 DM.<br />
-* Channel separation: &gt; 28 dB at 1 kHz
-* Channel balance: (1kHz) < 1 dB
+'''Technical Data''':
-* Übersprechdämpfung: >28 db
-* Output voltage: 5.6 mV
+Output Voltage
-* Terminating resistor: 47 kOhm
+,6mV
-* Induction:
-* Needle type: Van den Hul II 5/75 µm (according to Elac writing and cartridge overview, see links, Van den Hul '''I''').
-This is not correct, because "H SP" means "Special", in other words:
+Frequency Response
-van den Hul I diamond cut
+Hz - 30kHz
-The systems with only one "H" in the name are equipped with van den Hul II cut, all systems with "H SP" are equipped with van den Hul I cut.
-This is also what you can read in the brochures to which the links refer.
-* Recommended contact force: 10 - 12.5 mN
+Tracking Force
-* Needle compliance: 30 µm/mN static
+-1.25g
-* Recommended eff. tonearm mass: 6-12 g (according to Elac literature 8-14 g, see link)
-== Pictures==
+Mass
-* Optics corresponds to [[Elac ESG-796 S]], see also link of the advertising brochure.
+.5g
-==Test reports==
+Channel Separation
-*Stereoplay 1986
+> 28db
+Channel Balance
+< 1db
+Load Impedance
+k ohms
+Output Impedance
+Stylus
+diamond pur
+Stylus Tip
+VdH (van d`Hul) I
+Cantilever
+boron
+Dynamic Compliance
+x10-6cm/Dyne
+==Testberichte==
+Stereoplay
 ==Link==
-* [http://www.hifimuseum.de/elac-esg796-hsp-h30.html Information about the Elac 796 H Sp at hifimuseum.de]
+* [http://www.hifimuseum.de/elac-esg796-hsp-h30.html Informationen über das Elac 796 HSp bei hifimuseum.de]<br />
-* [http://www.aaanalog.de/media/downloads/TA-Daten.pdf Overview pickups, page 5 Elac]
-* [http://new-hifi-classic.de/Gallery_MO/albums/M_O/Tonarme/ta-to/Elac/ELAC_D796-H30%2BHSP_(1).jpg Elac advertising label 1986 of the special series] from Forum.
-<br />
-[[Category:Pickups]]</1>
+[[Kategorie:Tonabnehmer]]