Latest revision |
Your text |
Line 1: |
Line 1: |
− | __NOTOC__
| + | Elac ESG 796HSP |
− | == Data ==
| |
− | {{navigation}}
| |
− | '''General'''
| |
− | * Manufacturer: [[Elac]], Kiel, Germany
| |
− | * Model: ESG 796 H SP + H SP "Anniversary".
| |
− | * Years of manufacture: 1986 - 1990
| |
− | * Manufactured in: Germany
| |
− | * Colour: gold/black
| |
− | * Weight: 6,5 g
| |
− | * Original price: UVP 500 DM, anniversary model 300 DM
| |
| | | |
| + | '''General''': <br /> |
| | | |
− | '''Technical data'''
| + | Type: moving magnet<br /> |
− | * Principle: MM
| |
− | * Frequency response: 10 - 30,000 Hz (+- 1db)
| |
− | * Channel separation: > 28 dB at 1 kHz
| |
− | * Channel balance: (1kHz) < 1 dB
| |
− | * Übersprechdämpfung: >28 db
| |
− | * Output voltage: 5.6 mV
| |
− | * Terminating resistor: 47 kOhm
| |
− | * Induction:
| |
− | * Needle type: Van den Hul II 5/75 µm (according to Elac writing and cartridge overview, see links, Van den Hul '''I''').
| |
| | | |
− | This is not correct, because "H SP" means "Special", in other words:
| + | Date of manufacturing: ca. 1986 |
− | van den Hul I diamond cut
| + | <br /> |
− | The systems with only one "H" in the name are equipped with van den Hul II cut, all systems with "H SP" are equipped with van den Hul I cut.
| + | Price: first 500 DM, later 300 DM.<br /> |
− | This is also what you can read in the brochures to which the links refer.
| + | |
| + | '''Technical Data''': |
| + | |
| + | Output Voltage |
| + | 5,6mV |
| + | |
| + | Frequency Response |
| + | 10Hz - 30kHz |
| | | |
− | * Recommended contact force: 10 - 12.5 mN
| + | Tracking Force |
− | * Needle compliance: 30 µm/mN static
| + | 1-1.25g |
− | * Recommended eff. tonearm mass: 6-12 g (according to Elac literature 8-14 g, see link)
| |
| | | |
− | == Pictures==
| + | Mass |
− | * Optics corresponds to [[Elac ESG-796 S]], see also link of the advertising brochure.
| + | 6.5g |
| | | |
− | ==Test reports==
| + | Channel Separation |
− | *Stereoplay 1986
| + | > 28db |
| | | |
− | ==Link==
| + | Channel Balance |
− | * [http://www.hifimuseum.de/elac-esg796-hsp-h30.html Information about the Elac 796 H Sp at hifimuseum.de]
| + | < 1db |
− | * [http://www.aaanalog.de/media/downloads/TA-Daten.pdf Overview pickups, page 5 Elac]
| + | |
− | * [http://new-hifi-classic.de/Gallery_MO/albums/M_O/Tonarme/ta-to/Elac/ELAC_D796-H30%2BHSP_(1).jpg Elac advertising label 1986 of the special series] from Forum.
| + | Load Impedance |
− | <br />
| + | 47k ohms |
− | [[Category:Pickups]]</1> | + | |
| + | Output Impedance |
| + | |
| + | Stylus |
| + | diamond pur |
| + | |
| + | Stylus Tip |
| + | VdH (van d`Hul) I |
| + | |
| + | Cantilever |
| + | boron |
| + | |
| + | Dynamic Compliance |
| + | 30x10-6cm/Dyne |
| + | |
| + | [[Kategorie:Tonabnehmer]] |