Latest revision |
Your text |
Line 1: |
Line 1: |
| __NOTOC__ | | __NOTOC__ |
− | == Data == | + | == Daten == |
− | {{navigation}} | + | {{Navigation}} |
− | '''General''' | + | '''Allgemein''' |
− | * Manufacturer: [[Dual]] | + | * Hersteller: [[Dual]] |
− | * Model: CS 1249 | + | * Modell: CS 1249 |
− | * Type: Record changer | + | * Baujahre: 1975 - 1976 |
− | * Years of manufacture: 1975 - 1978
| + | * Hergestellt in: Deutschland |
− | * Made in: Germany | + | * Farbe: Schwarz,Nußbaum,Weiß |
− | * Color: Black, Walnut, White | + | * Leistungsaufnahme: 10 Watt |
− | * Power consumption: 10 Watt | + | * Abmessungen: |
− | * Dimensions: 420 x 148 x 365 mm (WxHxD) | + | * Gewicht: |
− | * Weight: 7.6 kg | + | * Neupreis ca.: 560 DM |
− | * Original price approx.: 698 DM | |
| | | |
| + | '''Anschlüsse''' |
| + | * Ausgänge: 1 |
| | | |
− | '''Connections''' | + | '''Technische Daten''' |
− | * Outputs: 1 DIN 5pol. convertible also Cinch + ground | + | * Antrieb: 8pol asynchronischer Motor |
− | | + | * Drehzahl: 33 1/3 & 45 U/min |
− | | + | * Gleichlaufschwankungen: +/- 0,08 % |
− | '''Technical Data Drive'''
| + | * Rumpelgeräuschabstand: ungewichtet: -42 dB, gewichtet: -63 dB |
− | * Drive: 8pin AC synchronous motor (Dual SM-840) | + | * Plattenteller: Nichtmagnetisch, 305 mm, 1,3 kg |
− | * Speed: 33 1/3 & 45 rpm
| + | * Betriebsart: Riemen |
− | * Synchronous speed fluctuation: +/- 0,055 % (measured) | |
− | * Rumble noise ratio: unweighted: -45 dB, weighted: -67 dB (measured) | |
− | * Turntable: Non-magnetic,dynamically balanced,305 mm, 1,3 kg | |
− | * Rotational mass : 2,1kG incl. sub platter | |
− | * Operating mode: Belt
| |
| * Pitch: ±6% | | * Pitch: ±6% |
| + | * Tonabnehmer: Shure DM 103 ME |
| | | |
| | | |
− | '''Technical data tonearm'''
| |
− | * Cardanic mounted straight aluminium tube tonearm
| |
− | * Effective length: 222mm
| |
− | Centre distance (platter bearing to tonearm pivot axis): 203mm
| |
− | * Offset angle: 25,33 degrees
| |
− | * Tangential tracking error angle: 0.16 degrees/cm
| |
− | * Overhang: 16mm
| |
− | * Overhang range: ~ 5mm
| |
− | * Effective mass: ~12 gr. incl. TC
| |
− | * Bearing friction: max. 0.07mN vert./0.16mN hor.
| |
− | * Pickup ex works: Shure DM 103 ME
| |
− | * 1. vert. Eigenresonance with it: ~ 6Hz
| |
− | * Pickup is exchangeable: yes, with subheadshell e.g. TK24
| |
− |
| |
− |
| |
− | '''Special Features'''
| |
− | * Height-adjustable tone arm for changer operation
| |
− | * External stroboscopic lamp
| |
− | * Automatic continuous playback
| |
− | * Subchassis suspension
| |
− | * Counter oscillator in the counterweight of the tonearm
| |
− | * Adjustable pick-up and lift-off points of the tonearm
| |
− | * Manual operation with touchdown aid
| |
− | * Adjustable lift height
| |
− |
| |
− |
| |
− | == Remarks ==
| |
− | The 1249 has the same "Flywheel" belt drive with a sub-disc (ALU) attached to the axle and a turntable resting on it as the older 601 single player.
| |
− | However, it has a weaker platter bearing due to the interchangeable axle.
| |
− | Also, the zinc die-cast of the 601 has given way to the aluminium die-cast of the 1249.
| |
− | The tonearm of the 1249 has been reworked compared to the 601 and has a very low bearing friction and a counter-oscillator in the counterweight, which allows a high scanning capability and safe scanning even of cartridges that actually require a tonearm with a lower effective mass for optimal operation.
| |
− | * Like all pre-ULM arms ('''U'''ltra '''L'''ow '''M'''ass) from Dual, the arm of the 1249 belongs to the lighter medium weight arms with an effective mass of ~ 12gr. including subheadshell (TK).
| |
− | * The motor is an 8-pole AC synchronous motor without servo electronics (SM840).
| |
− | The speed fine adjustment is done mechanically by spreading a slotted drive roller and is very sensitive.
| |
− | * Drive and tone arm are qualitatively superior to current Dual models (CS-455,505-4).
| |
− | * The factory-installed pickup was chosen with consideration of the change function and is clearly below the capabilities of the device.
| |
− | * When used as a single player, it is essential to install a higher quality cartridge.
| |
− | * Even MCs are no problem as long as they are not explicitly designed for heavy arms.
| |
− | * A few years ago still a bargain, he now achieves quite handsome prices in the second-hand market.
| |
| | | |
| + | '''Besondere Ausstattungen''' |
| + | * Höhenverstellbarer Tonarm für Wechslerbetrieb |
| + | * Stroboskopleuchte |
| + | * wechselbares System |
| + | * Pitchfunktion |
| + | * automatische Dauerwiedergabe |
| + | * Federung |
| + | * Rückwärtslauf |
| | | |
− | == Pictures == | + | == Bemerkungen == |
− | * Picture: Dual CS 1249
| + | Der 1249 besitzt denselben Antrieb wie der 601 Einzelspieler. |
− | [[File:Dual CS 1249.jpg]]
| + | Die Kraft wird per geschliffenem Flachriemen auf den Metallsubteller |
| + | übertragen auf welchem der Plattenteller aufliegt. Die gesamte Dreh- |
| + | masse beträgt 2,1 kG. |
| + | Der Tonarm des 1249 ist jedoch gegenüber dem 601 überarbetet worden |
| + | und verfügt über eine sehr geringe Lagerreibung was eine hohe |
| + | Abtastfähigkeit des Tonabnehmers ermöglicht. |
| + | Wie alle Vor-ULM-Arme ('''U'''ltra '''L'''ow '''M'''ass) von Dual gehört der Arm des 1249 zu den |
| + | mittelschweren Armen mit einer effektiven Masse von ~ 12gr.. |
| + | Antrieb und Tonarm sind aktuellen Dual-Modellen (CS-455,505-4) |
| + | qualitativ überlegen. |
| | | |
| + | == Bilder == |
| | | |
− | * Excerpt from brochure: Dual CS 1249
| + | == Berichte == |
− | [[File:Dual CS-1249-Prospekt-1.jpg]]
| |
− | | |
− | | |
− | == Reports == | |
− | | |
| | | |
| == Links == | | == Links == |
| | | |
− | | + | [[Kategorie:Plattenspieler]] |
− | [[Category:Plate changer]] | |