Editing Denon DRA-935 R

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
__NOTOC__
+
{{braucht Arbeit}}
== Data ==
+
AM-FM Stereo Receiver DRA-935R
{{navigation}}
 
'''General'''
 
* Manufacturer: [[Denon]]
 
* Model: DRA-935 R
 
* Type: Receiver
 
* Years of manufacture: 1991 - 1993
 
* Made in: Japan
 
* Colors: Black, Champagne
 
* Remote control: RC-137 (programmable)
 
* Power consumption: 280 W
 
* Dimensions: 434 x 160 x 402 mm (WxHxD)
 
* Weight: 11 kg
 
* Original price approx.: 1'350 DM
 
  
 +
Technische Daten:
  
'''Connections'''
+
2 x 170W (4 Ohm stetig 1 kHz, Klirr 0,7%)<br>
* Number of inputs: 6
+
2 x 100W (8 Ohm, 20Hz~20kHz, Klirr 0,015%))<br>
** Phono MM: 2.5 mV / 47 kOhm
 
** CD: 150 mV / 23 kOhm (direct switch: on) or 47 kOhm (direct switch: off)
 
** Video: 150 mV / 23 kOhm (direct switch: on) or 47 kOhm (direct switch: off).
 
Tape 1: 150 mV / 23 kOhm (direct switch: on) resp. 47 kOhm (direct switch: off)
 
** Tape2/VCR: 150 mV / 23 kOhm (direct switch: on) or 47 kOhm (direct switch: off)
 
VDP: 150 mV / 23 kOhm (direct switch: on) resp. 47 kOhm (direct switch: off)
 
  
* Number of outputs:
+
Gesamtklirrfaktor: 0,006% (-3dB bei Solleitung 8 Ohm))<br>
** switched AC out (max. 100W).
 
** headphones
 
2 pairs of speakers (A, B or A+B switchable)
 
Video out/Monitor: 1 Vpp / 75 Ohm
 
  
  
'''Technical data'''
+
Abmessungen: 434 mm x 160 mm x 402 mm (B x H x T))<br>
  
''Amplifier''
+
Gewicht: 11,0 kg)<br>
* Rated power
 
** 8 Ohm: 2 x 100 Watt (20Hz - 20 kHz, 0.015% distortion)
 
** 4 Ohm: 2 x 170 Watt (DIN 1 kHz, 0,7% distortion)
 
* Peak power
 
** 8 Ohm:
 
** 4 Ohm: 2 x 230 Watt
 
** 2 Ohm: 2 x 330 Watt
 
Distortion factor: 0.006% (- 3 dB at nominal power 8 Ohm)
 
* Attenuation factor:
 
* Power bandwidth (IHF): 5 Hz - 40 kHz (8 ohms, 0.05% distortion).
 
* Frequency response: 20 Hz - 50 kHz +/- 1.5 dB (b. 1 W)
 
* Output impedance: 0.1 Ohm (b. 1 kHz)
 
* Signal-to-noise ratio: 86 dB at 5.0 mV input
 
* Stereo channel separation:
 
* Tone control:
 
** Bass: 100 Hz +/- 10 dB
 
Treble: 10 kHz +/- 10 dB
 
* Loudness (variable): low 50 Hz + 10 dB, high 10 kHz + 5 dB (When VARIABLE LOUDNESS is set to "10").
 
* High Filter:
 
* Low Filter (Subsonic):
 
* Mute:
 
* Direct/Line-Straight: yes
 
 
 
 
 
''Tuner''
 
* Reception: FM, MW
 
* Frequencies:
 
** FM: 87.5 - 108 MHz
 
MW: 522 - 1611 kHz
 
* Frequency response: 20 Hz - 15 kHz (+/- 0.5 dB)
 
* Usable sensitivity:
 
** FM: 0.9 µV
 
MW: 18 µV
 
* Input sensitivity at 50 dB signal-to-noise ratio (75 Ohm IHF):
 
** Mono: 1.5 µV
 
Stereo: 20 µV
 
* Distortion factor: Mono: 0.06% / Stereo: 0.09%
 
* Noise voltage ratio:
 
** FM: Mono: 86 dB / Stereo: 82 dB
 
MW: 55 dB
 
* Channel separation: 55 dB (1kHz Wide)
 
* Selectivity: 55 dB (+/- 300kHz)
 
* Co-wave selection: 1.3 dB
 
* Spurious wave selection:
 
* IF attenuation: 80 dB
 
* IF attenuation:
 
* AM suppression: 60 dB
 
* Output level:
 
* RDS: no
 
* Station memory: 40 AM/FM stations
 
 
 
 
 
'''Special Features'''
 
* New class A circuit with opto-coupler eliminates switching and crossover distortions
 
* Power supply with pure current feed reduces dynamic intermodulation distortion by 60 dB
 
* Loudness circuit with variable characteristics
 
* Phono MM/MC switchable
 
* IF bandwidth switching
 
* Motor-driven remote volume control
 
* Switched mains socket
 
* Also suitable for low impedance speakers
 
 
 
 
 
== Notes ==
 
* Other models in the same series:
 
* [[Denon DRA-335 R]]
 
* [[Denon DRA-435 R]]
 
* [[Denon DRA-545 RD]]
 
* [[Denon DRA-735 R]]
 
* [[Denon DRA-935 R]]
 
 
 
 
 
== Pictures ==
 
* Image: Denon DRA-935 R
 
[[File:Denon DRA-935R.jpg]]
 
 
 
 
 
* Picture: Denon DRA-935 R
 
[[File:014.jpg|1000px]]
 
 
 
 
 
* Image: Denon DRA-935 R
 
[[File:DRA-935R_rear.jpg|1000px]]
 
 
 
 
 
* Excerpt from brochure: Denon DRA-545 RD, DRA-735 R, DRA-935 R
 
[[File:Denon DRA-545-735-935-Prospekt-1993.jpg]]
 
 
 
 
 
== Reports ==
 
* The built-in electronics are of the finest. The soundstage is always pleasing and very detailed at any volume. This receiver can take on any of today's red pen castrated receiver!
 
 
 
* High performance phono amplifier; former top of the line model and one of the most powerful receivers Denon has ever built.
 
 
 
* Top-of-the-line speakers, such as the Infinity Kappa 8.2 i Series II, go very well with this receiver. Top-of-the-line headphones are recommended, such as the [[STAX SR-44]]
 
 
 
 
 
== Links ==
 
 
 
 
 
[[Category:Receiver]]
 

Please note that all contributions to hifi-wiki.com may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see hifi-wiki.com:Copyrights for details). Do not submit copyrighted work without permission!

To edit this page, please answer the question that appears below (more info):

Cancel Editing help (opens in new window)

Template used on this page: