Latest revision |
Your text |
Line 1: |
Line 1: |
− | __NOTOC__
| + | * [[Brinkmann Vollverstärker|Vollverstärker]] |
− | == Data ==
| |
− | {{navigation}}
| |
− | '''General'''
| |
− | * Manufacturer: [[Brinkmann]] | |
− | * Model: Integrated amplifier
| |
− | * Years of manufacture: 1997 to date
| |
− | * Made in: Germany
| |
− | * Color: black
| |
− | * Type: (digital/analog) analog, optionally available with D/A converter board
| |
− | * Remote control: yes, on the newer units
| |
− | * Power consumption: stand-by 50W, idle 70W, full load 240W
| |
− | * Dimensions: 44 x 6,5 x 31 cm (WxHxD)
| |
− | * Weight: 14kg
| |
− | * New price approx:
| |
− | | |
− | | |
− | '''Connections'''
| |
− | * Number of inputs: 4 analog, 2 digital
| |
− | ** 4 Cinch analog
| |
− | 2 Cinch digital (75 Ohm)
| |
− | * Number of outputs: 1
| |
− | ** 1 pair of LS terminals
| |
− | | |
− | | |
− | '''Technical Data'''
| |
− | * Continuous power (at distortion factor)
| |
− | ** 8 Ohm: 70W
| |
− | 4 Ohm: 100W
| |
− | * Dynamic power
| |
− | ** 8 Ohm: 75W
| |
− | ** 4 Ohm: 100W
| |
− | * Total harmonic distortion: 0.1% at half power
| |
− | * Attenuation factor: 65 referred to 8 Ihm
| |
− | * Frequency response: DC ... 250kHz
| |
− | * Signal to noise ratio: 92 dbA
| |
− | * Stereo channel separation:
| |
− | * Tone control: no
| |
− | * Loudness: no
| |
− | * High Filter: no
| |
− | * Low Filter (Subsonic): no
| |
− | * Mute: yes, then the headphone output is active
| |
− | * Direct/Line-Straight: no
| |
− | | |
− | '''Special Features'''
| |
− | * Headphone output
| |
− | * remote control
| |
− | * optional D/A converter board
| |
− | | |
− | == Remarks ==
| |
− | Other models in the same series:
| |
− | | |
− | == Pictures ==
| |
− | | |
− | == Reports ==
| |
− | | |
− | == Links ==
| |
− | | |
− | http://www.brinkmann-audio.com
| |
− | | |
− | [[Category:Integrated amplifier]]
| |