Editing Akai AS-980

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 1: Line 1:
__NOTOC__
+
Form
== Data ==
+
FM/AM synthesis stereo amplifier
{{navigation}}
+
<FM tuner part>
'''General'''
+
Received frequency / IF frequency
* Manufacturer: [[Akai]]
+
76MHz - 90MHz/10.7MHz
* Model: AS-980
+
Sensitivity (IHF)  
* Type: Quadrophonic Receiver
+
2.0 microvolts
* Years of manufacture: 1973 - 1975
+
THD
* Made in: Japan
+
mono: 0.3% or less
* Color: silver, wooden case walnut
+
stereo: 0.5% or less
* Remote control: yes, cable remote control
+
S/N ratio
* Power consumption: 480 watts max.
+
70dB or more
* Dimensions: 650 x 155 x 365 mm
+
The degree of selection
* Weight: 20,5 Kg
+
70dB or more
* Original price approx.: 200'000 Yen (Japan, 1973), 2'980 DM
+
Image ratio
 
+
85dB or more (84MHz)  
 
+
IF disturbance ratio
'''Connections:'''
+
100dB or more (84MHz)  
* Number of inputs:
+
Spurious
** Phono 1: 3 mV, 50 kOhm, 130 mV max.
+
34dB or less
** Phono 2: 3 mV, 50 kOhm
+
Antenna input impedance
** Microphone: 3.8 mV, 50 kOhm
+
A 300-ohm balance type, a 75-ohm balance type
** Media Interface: 3 mV, 50 kOhm
+
Stereo separation
** AUX 1, 2: 150 mV, 100 kOhm
+
40dB or more
** Tape Play 1, 2: 150 mV, 100 kOhm
+
Capture ratio (IHF)
Main In: 500 mV, 50 kOhm
+
2.0dB
Coaxial FM antenna connection (75 Ohm)
+
<AM tuner part>
** AM antenna connection (300 Ohm)
+
Received frequency
* Number of outputs:
+
535kHz - 1605kHz
** Tape Rec 1, 2: 150 mV
+
Sensitivity (IHF) Dummy
Pre Out: 500 mV, 4.5 V max.
+
10dB/one MHz (400Hz, 30%Mod)
** 4 x loudspeaker pairs: 2 x front, 2 x rear
+
Image ratio
** 2 x headphone outputs front + rear: 6.3 mm jack each
+
80dB or more (1MHz)  
 
+
IF disturbance ratio  
 
+
75dB or more (1MHz)  
'''Technical Data:'''
+
The degree of selection
 
+
35dB or more
'''Amplifier:'''
+
AM distortion
* continuous power: quadrophonic, 20 Hz - 20 kHz
+
1.0% or less
** 8 Ohm: 4 x 30 Watt
+
S/N ratio  
4 Ohm: 4 x 40 Watt
+
50dB or more (400Hz, 30%Mod)
* music power: quadrophonic, 20 Hz - 20 kHz
+
<Amplifier part>
8 Ohm: 170 W
+
Output
** 4 Ohm: 220 W
+
Music power :  
* Total harmonic distortion: &lt; 0.05 % at rated power
+
220W (4ohms)
* Attenuation factor: 50 at 8 ohms, 1 kHz
+
170W (8ohms)
* Frequency response:
+
Continuous cruising power :  
** Phono RIAA: 20 Hz - 50 kHz (8 ohms), ± 1 dB.
+
40W+40W (4ohms)
** High level: 10 - 60'000 Hz ± 3 dB
+
30W+30W (8ohms)
* Signal-to-noise ratio:
+
THD
** Phono: &gt; 75 dB
+
0.05% or less (8ohms)
** Line: &gt; 90 dB
+
Output bandwidth (IHF)
* Tone control:
+
20Hz - 50kHz (8ohms)
** Bass: ± 10 dB at 100 Hz
+
Frequency response
Treble: ± 10 dB at 10 kHz
+
10Hz - -60kHz three dB  
* Loudness: + 8 dB at 100 Hz, + 5 dB at 10 kHz
+
Input sensitivity/impedance
* Low Filter (Subsonic): - 5 dB at 50 Hz (6 dB / octave)
+
Phono: 3mV/50kohm
* High Filter: - 6 dB at 10 kHz (6 dB / octave)
+
AUX, Tape Monitor(Din/Pin):150mV/100kohm
Muting: - 20 dB
+
Media-Interface-Connector: 3mV/50kohm
 
+
An input-proof [ Phono ]  
 
+
130mV(1kHz)1%
'''CD-4 Demodulator section:'''
+
Equalizer
* Input sensitivity: 2.5 mV
+
RIAA±1dB
* Input impedance: 100 kOhm
+
Tone control
* Distortion factor: 0,07
+
Bass: 100Hz±10dB
* Signal-to-noise ratio: &gt; 70 dB
+
Treble: 10kHz±10dB
* Channel separation at 1 kHz:
+
Loudness control
** Left to Right: 50 dB
+
(Volume -30dB)
front to rear: 30 dB
+
100Hz:+8dB
* Frequency range: 20 - 15'000 Hz
+
10kHz:+5dB
 
+
Filter
 
+
High cut filter: -6dB, 10kHz
'''Tuner:'''
+
Low cut filter: -5dB, 50Hz
* Reception: FM, AM
+
Dimensions
* Frequencies:
+
Width 650x height 155x depth of 365mm
** FM: 87.5 - 108 MHz
+
Weight
** MW: 525 - 1605 kHz
+
20.5kg
* Input sensitivity:
 
** FM: 2.0 µV
 
** MW: 10 µV
 
* Frequency response: 20 - 15'000 Hz
 
* Distortion factor FM: Stereo &lt; 0.5 %, &lt; Mono 0.3 %
 
* Signal-to-noise ratio:
 
** FM: 70 dB
 
** AM: 50 dB
 
* Stereo channel separation: &gt; 40 dB at 1 kHz
 
* Selectivity:
 
** FM: 70 dB
 
** AM: 35 dB
 
* Co-wave selection: 2.0 dB
 
* Spurious wave selection: &gt; 70 dB
 
* Image frequency attenuation:
 
** FM: &gt; 85 dB
 
MW: &gt; 80 dB
 
IF attenuation:
 
** FM: &gt; 100 dB
 
** MW: &gt; 75 dB
 
* AM suppression: 50 dB
 
 
 
 
 
'''Special Features'''
 
* 4 VU meters
 
* Microphone input front, mixable
 
* MPX Noise Filter
 
* FM Muting
 
* Bass / Tweeter control V + H separately
 
 
 
 
 
== Remarks ==
 
* All models in the same series:
 
** [[Akai AA-910]]
 
** [[Akai AA-910 DB]]
 
** [[Akai AA-920]]
 
** [[Akai AA-930]]
 
** [[Akai AA-940]]
 
** [[Akai AS-960]]
 
** [[Akai AS-970]]
 
** [[Akai AS-980]]
 
 
 
 
 
* [[Introduction to Kenwood 4-Channel Playback Technology
 
** [[Introduction Kenwood 4-channel playback technology|Introduction Kenwood 4-channel playback technology]]
 
 
 
 
 
== Pictures ==
 
* Extract from brochure: Akai AS-980
 
[[File:Akai AS-980-Prospekt-1.jpg]]
 
 
 
 
 
* Excerpt from advertisement: Akai GX-280 D-SS with Akai AS-980
 
[[File:Akai AS-980-280D-SS-1.jpg]]
 
 
 
 
 
== Reviews ==
 
 
 
 
 
 
 
== Links ==
 
 
 
 
 
[[Category:Receiver]]
 

Please note that all contributions to hifi-wiki.com may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see hifi-wiki.com:Copyrights for details). Do not submit copyrighted work without permission!

To edit this page, please answer the question that appears below (more info):

Cancel Editing help (opens in new window)

Template used on this page: