Technics SC-HD510
Data[edit]
General
- Manufacturer: Technics
- Model: SC-HD510
- Years of manufacture: 2000 - 2001
- Made in: Osaka, Japan
- Color: champagne silver
- Amplifier: SE-HD510
- Tuner: ST-HD510
- CD Player: SL-HD510
- Cassette deck: RS-HDA710
- Loudspeaker: SB-HD510
- Remote Control: RAK-HDA25WH (Infrared)
- Power consumption: 73 W, standby: NORMAL 9 W ECO 0.8 W
- Dimensions: Amplifier: width: 196 mm, height: 105.8 mm, depth: 259.9 mm.
- Dimensions: Tuner: width: 196 mm, height: 76.8 mm, depth: 250 mm.
- Dimensions: Cassette deck: width: 196 mm, height: 105.8 mm, depth: 236.1 mm.
- Dimensions: CD player: width: 196 mm, height: 76.8 mm, depth: 243.1 mm.
- Dimensions: Speaker: width: 155 mm, height: 334 mm, depth: 252 mm.
- Weight: Amplifier: 3,3 kg
- Weight: Tuner: 1,0 kg
- Weight: Cassette deck: 1,5 kg
- Weight: CD player: 1,2 kg
- Loudspeaker: 3,5 kg
- New price complete approx.: 1.000 DM
Remarks[edit]
Amplifier: two separate amplifier sections, one for bass and one for treble, therefore the bass and treble are connected separately (4 cables per speaker, so called biamplifing). Output power: bass reproduction: 2 x 12 W (DIN) or 2 x 15 W (rms), treble reproduction: 2 x 5 W (DIN) or 2 x 8 W (rms). Tuner: VHF and MW reception with 75 Ohm (asymmetrical) aerial socket and MW aerial, programmable timer
- Cassette deck: Dolby type B noise reduction switchable. Bands and frequency response (without Dolby system during recording and playback): Type I (Normal) 30 Hz to 16 kHz (DIN), Type II (High) 30 Hz to 16 kHz (DIN), Type IV (Metal) 30 Hz to 16 kHz (DIN). The belt type detection is automatic. Capstan drive with DC servo motor, winding core drive with DC motor. Autoreverse operation.
- CD player: D-A converter 1 bit, 2 DAC MASH
- Loudspeaker: 2-way, 2-speaker bass reflex system, impedance 6 Ohm, frequency response 45 Hz to 50 kHz, power handling: bass reproduction 60 W (music power), 30 W (DIN), treble reproduction 30 W (music power), 15 W (DIN).
- The individual components are connected to each other via a special ribbon cable. The power is supplied via the amplifier, the remote control runs via the tuner. Unfortunately, the components cannot be used separately and cannot be exchanged for other devices. An exchange of the loudspeaker boxes is also not possible because of the Biamplifing.
The connection of an additional device (e.g. MD recorder/player) is possible via an RCA input and an RCA output on the rear of the tuner.
Pictures[edit]
- Matching devices of the same series